GUIDE DE L’UTILISATEUR USER GUIDE 10079 - Version 1 - 06-2013 Casque Bluetooth® sur batterie avec micro Bluetooth® portable headphones with micro
Français Page 2
Français ► Contenu de l’emballage - Une casque Audiophony BT2i - Un cordon USB-Jack d’alimentation pour la charge de la batterie - Un cordon plat Jack-Jack 3,5 mm pour le branchement audio - Une housse de protection pour le transport - Le manuel d’emploi ► Guide de démarrage Appairage Bluetooth® Assurez-vous qu’aucun câble ne soit connecté à la fiche audio Jack 3,5mm. Allumez le casque en appuyant plus de 5 secondes sur le bouton ON/OFF. Le voyant doit clignoter en rouge et bleu.
Français ► Description des fonctions 4 3 5 2 6 1 7 1 VOL+ 2 VOL3 Play/Stop/TEL/Raccrocher (Touche multifonction) 4 Avance 5 Retour 6 Power On/Off / Appairage 7 Fiche Jack Audio/Charge 8 Micro 9 Voyant 8 9 ► Charge de la batterie Première utilisation Il est important de charger complètement votre casque avant la première utilisation. Pour ce faire, branchez le cordon USB-Jack d’alimentation sur le connecteur de l’écouteur droit.
Français ► Caractéristiques • Design fashion, très confortable, grande qualité audio équipé d’un micro intégré • Compatible avec la majorité des appareils Bluetooth® téléphones, tablettes et ordinateurs • Fonctionne en Bluetooth® ou prise audio Jack 3,5mm • Profils Bluetooth® supportés : V2.
Français ► Précautions A pleine puissance, l’écoute prolongée du casque peut endommager l’oreille de l’utilisateur. • N’utilisez pas votre casque dans des environnements extrêmes, il est conçue pour fonctionner dans une plage de températures allant de 0°C à +35°C. • Protégez votre enceinte de tout liquide ou humidité • Ne choquez pas votre enceinte, cela entraînerait des risques de détériorations de la coque et/ou la destruction des parties internes.
English ► What’s in the box • • • • • Audiophony BT2i headset USB charging cable : USB-DC Flat cord Jack-Jack 3,5 mm audio connector Carry pouch User guide ► Quick start guide Bluetooth® pairing Make sure that no cable is connected to the 3.5 mm audio jack. Turn on the headset by pressing more than 5 seconds on the ON / OFF button. The LED should flash red and blue. The BT2i is now ready to be connected to your Bluetooth® transmitter.
English ► Functions description 9 6 3 5 4 2 1 1 VOL+ 2 VOL3 Play/Pause/TEL/END (Multifunction Key) 4 Next 5 Previous 6 Power On/Off/Pair 7 Audio Jack/Power 8 Mic 9 LED 8 7 ► Battery charging First use It is important to fully charge your headset before the first use. To do this connect the USB-Jack cable on the connector on the right earpiece. You can use a computer USB port to charge your headphones or a mains charger with a USB plug. The LED on the front lights red during charging.
English ► Specification • Fashion design, very comfortable, high-quality audio equipped with a microphone • Compatible with most Bluetooth ® phones, tablets and computers • Bluetooth® mode or audio jack 3.5mm input • Bluetooth ® profiles supported: V2.
English ► Warning Risk of hearing loss listen music to a reasonable level • Do not use your headset in extreme environments, it is designed to operate in a temperature range from 0°C to +35°C. • Protect your headset from any liquid or moisture. • Do not shock your headset, this would risk damage to the hull and / or destruction of internal parts. • Do not open your headset, no internal part is serviceable outside our factory.
English Page 11
Audiophony – HIT MUSIC SA – Parc d’Activités du Sycala – 46091 CAHORS CEDEX 09 - FRANCE www.audiophony.