Tog DO NOT OPEN (\ AVIS: RISQUE DE CHOC ELECTRICIAN PAS SOUVENIR WARNING: SHOCK HAZARD-DO NOT OPEN This lightning flash with arrowhead symbol within an equilateral triangle Is Intended to alert the user to the presence of non-Insulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. Warning: To reduce the risk of electric shock, do not remove cover {or back} as there are no user serviceable parts Inside.
—p— 2: Getting Sta rte Welcome to Audio lab 6000 Series. 600DA Is the latest In a long line of Laudably Integrated amplifiers with a pedigree that stretches back to the very first BOO that made Laudably an overnight sensation. The 6000A features analogue and digital audio circuitry of the highest quality and has been designed by engineers who are passionate about the reproduction of muse, and we hope you well enjoy Its performance for many years to come.
Clavicle 6000A Man cal 180622.
5: Connections Analogue Inputs (Line Level) Connect your analogue sources to one of the three line level inputs, AUX, AUX or AUX. Phonon Input (MM) Connect your Turntable (Moving Magnet cartridge) to the PHONON Input. Connect the Earth lead from your Turntable (If available) to maw— am — moa — aus the GROUND terminal. Coaxial digital Inputs Connect your coaxial digital sources to either DIG or DIG. Optical digital Inputs Connect your Optical digital sources to ether OPT or OPT.
Switching On and Off Switch on all source units before switching on power to the 6000A, When switching On: The power LED illuminates. When switching Off: Switch off the 6000A before the source units. Standby Mode The 6000A well enter standby mode after being powered on. Press the “Standby” button to bring the 6000A out of standby, the power Indicator LED becomes brighter and the display shows “60C0A" welcome screen while the unit Is getting ready for operation.
6: Operation -2 Operating Modes ve Although the 6000A is an integrated amplifier it can function as a separate Pre and Power amplifier. Use the MODE knob on the front panel, or the MODE key on the Remote control, to select different operating modes. Pr-Power mode The per-amplifier section Is internally disconnected from the power amplifier. The 6000A can be used as a stand alone power amplifier {le. part of an AV setup).
The MENU The menu enables you to customize the unit and optimize the Interface with other equipment in your system. 6000A has 6 different menu pages.
7: Warranty Audio lab Ltd, warrants this product, subject to the terms and conditions below, to be free from defects in materials and workmanship. During the warranty period Audio lab will repair or replace (at Claudia's option) this product, or any defective part in this product, if iris found to be defective due to faulty materials, workmanship or function. The warranty period may vary from country to country.