Quick Start Guide

ManualsBrandsAudioControl ManualsAmplifiersAll-Weather Series Bluetooth HD Audio Streamer - Multi

BLUETOOTH RECEIVER WITH APTX™ HD SUPPORT

Quick Start Guide

Features

• Compact, elegant design with no buttons or switches

• aptX™ HD Support

• BT v4.1 chip set

• All-weather IPX5 rated

• Universal design works with any ampliﬁer or device with line

level (RCA) inputs

• Unique remote turn-on output circuit

• Paciﬁc Northwest freshness built-in!

Summary of content (6 pages)

PAGE 1
Features • Compact, elegant design with no buttons or switches • aptX™ HD Support • BT v4.
PAGE 2
Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not submerge this apparatus in water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as mufflers, silencers, exhaust pipes, or other apparatus (including amplifiers) that produce heat.
PAGE 3
Remote, Power, and Output Connections q w e r t 1. Remote Turn-On Output (Blue) – This 12v DC/20mA remote output is designed to turn on a connected amplifier. This output is only active after audio has begun playing and will remain active for approximately 7 seconds after audio playback has ceased. 2. 12 Volt Power Input (Fused @ 2A) (Red) – Connect this lead to an accessory (switched) power source from your vehicle.
PAGE 4
Quick Start Here are a few general steps to get your ACX-BT1 Bluetooth Receiver up and running: 1. Undo the +12V and Ground connections to the vehicle battery before making any connections to the Bluetooth receiver. 2. Pick a mounting location that will provide access to the controls and connections, provide plenty of good ventilation, and also protect the Bluetooth receiver from heat, moisture, and dirt. 3. The ACX-BT1 can be securely mounted using the two mounting holes located in each side. 4.
PAGE 5
System #1: Head-unit-less All-Weather System + L + R Line-level L/R outputs + + 5
PAGE 6
Specifications All specifications are measured at 14.4 VDC (standard automotive voltage). As technology advances, AudioControl reserves the right to continuously change our specifications, like our Pacific Northwest weather, although we are working on changing that as well. ACX-BT1 Bluetooth Receiver Nominal Output Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5 Vrms. S/N Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .