AudioCodes C455HD IP Phone for Microsoft® Teams™ Quick Guide 1. Before Installing Congratulations on purchasing your AudioCodes C455HD for Microsoft Teams IP Phone! Before installing your phone, make sure the following items are included in the shipped box: ✓ C455HD IP Phone ✓ AC power adapter (optional) ✓ Cat 5e Ethernet cable ✓ Handset ✓ Handset cord ✓ Desktop stand ✓ Wall mount 2.
3. Cabling the Phone Warning: Prior to connecting power, refer to the Compliancy and Regulatory Information document at https://www.audiocodes.com/library/technical-documents. To cable the phone: 1. [Refer to the illustration below] Connect the short, straight end of the phone cord to the handset and the longer straight end of the cord to the handset jack on the phone. 2. (Optional) Connect a USB headset to one of the two USB ports . 3.
4. Mounting the Phone on a Desktop or Wall ✓ Desktop: Slide the L-shaped stand's short or long edge slots onto these rails. ✓ Wall: Slide the wall mount fitting onto these rails.
Wall Mount P a g e |4
. Signing in To sign in to your account: 1. Connect the device to the network. 2. Point your browser to https://microsoft.com/devicelogin as instructed. 3. Key in the code and click Next.
4. Click the account. 5. Key in your password (it's the same password as the Windows password on your PC) and then click Sign in. Close the ‘Microsoft Authentication Broker’ window; your phone returns to the initial code screen. In that screen, touch Sign in on this device. 6. 7. Touch the 'Email, phone or username' field; a virtual keyboard pops up. Enter one of them and then touch Sign in. The 'home' screen opens.
8. In the browser on your PC or smart phone, enter the URL and then in the phone’s Web interface that opens, perform sign-in (as noted previously, this option is recommended if using MFA). 6. Changing your Presence Status To change your presence status: Swipe right, touch the current presence status, and then select the status you require. 7. Basic Phone Operations For basic phone operations, refer to Microsoft documentation and the User's and Administrator's Manual. 8.
9. Enabling or Disabling Wi-Fi To enable Wi-Fi: 1. Turn Wi-Fi on by moving the switch in the upper right corner (Wi-Fi is disabled by default). 2. 3. After enabling Wi-Fi, "Searching for Wi-Fi networks…" is displayed. The phone then displays the available Wi-Fi Access Points. Select the desired Wi-Fi Access Point (network). Enter the Wi-Fi password if needed, and then tap Connect. 4. When connected to the Access Point, "Connected" is displayed: 10.
2. In the Settings screen, select the Bluetooth option, and then in the Bluetooth screen, move the switch to On to start Bluetooth scanning. 3. Select the desired Bluetooth device to pair. If prompted for the Bluetooth Pairing code, enter it, and then touch Pair. 4. Once successfully paired, the Bluetooth audio device appears under the ‘Paired devices’ section. To connect, touch the device name. To unpair, touch the gear icon on the right of the device name, and then click Forget. 5.
• • • FCC WARNING: FCC Guidelines for Human Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all applicable regulatory certifications and approvals. We, Audiocodes Ltd.
Notice Information Information contained in this document is believed to be accurate and reliable at the time of printing. However, due to ongoing product improvements and revisions, AudioCodes cannot guarantee accuracy of printed material after the Date Published nor can it accept responsibility for errors or omissions. Updates to this document can be downloaded from https://www.audiocodes.com/library/technical-documents. This document is subject to change without notice.