QUALITY, RLIABILITY, & PURE BLISS FLIP DOWN ACTIVE MATRIX TFT-LCD MONITORS AVM730IRV / AVM809IRV / AVM104IRV OPERATING INTSTRUCTIONS PLEASE RETAIN MANUAL FOR FUTRE USE AND REFERENCE
The Audiobahn Way To bring the product to market that excites the consumer through sound and vision from an orientation of integrity and customer service. We make you look as good as you sound. We strive to take car audio to an extreme the world has never seen, and a world that never stops evolving.
Table of Contents Table of Contents INTRODUCTION 3 UNPACKING YOUR MONITOR SYSTEM 4 SAFETY PRECAUTION 5 PECIFICATIONS 6 SYSTEM FEATURES AND CONTROLS 7 REMOTE CONTROL FUNCTIONS 7 INSTALLATION 9-10 OSD FOR AVM730IRV 11 OSD FOR AVM104IRV 12-13 WARNING / DISCLAIMER 14 WARRANTY 15-16 2
Introduction Dear Customer, Congratulations on your purchase of the worlds finest brand of car audio products. Here at Audiobahn Inc. we are devoted to making our musical reproduction the very best, and we are pleased you have chosen our product. Through years of engineering expertise, hand craftsmanship, and critical testing procedures, we have created a wide range of products that reproduce music with all the clarity and richness you deserve.
Unpacking Your Monitor System Unpack the monitor and all other items carefully. Check to make sure nothing is missing or misplaced while unpacking. If any item(s) are missing from the list below, please contact the dealer you purchased the equipment from immediately. The Audiobahn Flip Down Systems Include: Monitor with Flipdown Housing 7.2" TFT-LCD Monitor in AVM730IRV 10.
Specifications AVM730IRV AVM104IRV 7.2" (16:9) 10.4" (4:3) Display Resolution 1152 (H) x 234 (V) 1920 (H) x 480 (V) Min.
System Features and Controls 3-Position Dome Light Off / Auto / On Up / Down Keys These multipurpose keys are used to increase or decrease the selected parameter, such as contrast, color and so on. Mode This button brings up the menu screen for adjustment of a range of monitor parameters such as color, tint and so on. Power Turns on the power to the monitor. Press the power button once, and the unit will switch to AV1. Press the power button twice, and the unit will switch to AV2.
Remote Control Functions Power Turns on the power to the monitor Up / Down Keys These multifunction keys are used to increase and decrease the selected parameter, such as contrast, color and so on Mode This button brings up the menu screen for adjustment of a range of monitor parameters such as color, tint and so on. AV Swithces the monitor between AV1 and AV2.
Installation To avoid damage to the unit or to your car, it is highly recommended that the installation is done by a professional car video installation shop. Warranty could be voided if you make changes or modifications not expressly approved. YELLOW(RCA): Video 1 input WHITE(RCA): Video 2 input NOTE: (+12 volt) RED wire and Ground wire have to be connected for wireless IR circuit and dome lights to work.
Installation Step1: Use mounting bracket (A) to cut out the size of ceiling to provide a mounting surface which the housing of the flip down monitor can be attached. Step2: Use tapping screws or rivets on position (B) for mounting bracket (A) on the vehicles roof. Step3: Use the 6 pieces of machine screws (C) to mount the housing of the monitor to mounting bracket (A).
OSD for AVM104IRV 1. Press "Power" on the monitor or remote to turn on the monitor. 2. Press "Mode" on the monitor or remote to display the on screen adjustment menu as shown below: Color OSD Miscellaneous Exit 3. Press "UP" or "DOWN" on the monitor or remote to select the setting to adjust. Then press "Mode" to confirm the selection or adjustment. Each adjustment item is shown as below: The Color selection opens a submenu with additional adjustable parameters.
OSD for AVM104IRV Translucent: After selecting Translucent by using the Mode button, use UP or DOWN to turn translucent on or off. The Miscellaneous selection opens a submenu with additional parameters. Selecting Miscellaneous reveals the following screen: Signal Source Reset Volume Exit Signal Source: After selecting Signal SOurce by using the Mode button, use UP or DOWN to change the input source between Video 1 and Video 2.
4ECHNICAL !SSISTANCE TECH AUDIOBAHNINC COM Warning / Disclaimer WARNING Investigate the layout of your automobile thoroughly before drilling or cutting any holes. Take care when you work near the gas tanks, gas lines, hydraulic lines, and electrical wiring. Attach the system securely to the automobile to prevent damage, particularly in the event of an accident. Do not mount the system so that the wire connections are unprotected or are subject to pinching or damage from nearby objects.
4ECHNICAL !SSISTANCE TECH AUDIOBAHNINC COM Warranty Audiobahn Consumer Product Warranty Policy Audiobahn products are manufactured with the highest quality components and some of the most advanced technology available. Because of this, we recommend that you have your new products installed by an Authorized Audiobahn Dealer.(A list of Authorized Audiobahn Dealers can be found on our web page). Warranty Period: One year from the original date of purchase.
4ECHNICAL !SSISTANCE TECH AUDIOBAHNINC COM Warranty Continued How to receive warranty service: Contact your local Authorized Audiobahn Dealer, or call Audiobahn at (800) 488-8595 between the hours of 9:00 AM and 5:00 PM PST. If you are having problems with your system, we recommend you check the product carefully and thoroughly to confirm that the product truly has a manufacturer defect; as opposed to abuse, or other components in the system causing the failure.