ATH- AWKT Dynamic Headphones User Manual
Introduction ••Discontinue use if skin irritation results from direct contact with the product. ••Do not disassemble, modify or attempt to repair the product. ••Be careful to avoid pinching yourself between the housing and the arm of product. Thank you for purchasing this Audio-Technica product. Before using the product, read through this user manual to ensure that you will use the product correctly. Please keep this manual for future reference.
Notes on use •• The cable may become caught or severed if the product is placed in a bag without adequate protection. •• Do not wrap the included cable around a rack, furniture or other object. Do not allow the cable to be pinched. This may damage or sever the cable. •• Use only the included cable. Using a different cable may result in product malfunction. •• Lengthening the headphone cable requires a separate extension cable available from your dealer.
Name of each part Confirm each part before using the product. Slider Adjust the headband length by sliding the adjustable slider as shown in the figure so that the earpads cover your ears completely. Headband LEFT/RIGHT indicator Earpad Housing Arm A2DC connector jack A2DC connector plug Input plug Audio device Cable (3.0 m (9.8')/6.3 mm (1/4") gold-plated stereo plug) Balanced cable (3.0 m (9.
Using the headphones 1. Connect the connector plug of the included cable to the connector jack of the headphones. ••Refer to “About the detachable cable” for detailed information. ••Do not use a cable other than the supplied detachable cable. 2. Lower the volume on the device you intend to use, then connect the Input plug to the device’s headphone jack. 3. Fit the earpads over your ears with the side marked “LEFT” over your left ear and the side marked “RIGHT” over your right ear. 4.
About the detachable cable The cable on this product is detachable. If there are signs of deterioration, replace the cable. Cable ••Do not detach the cable except when replacing it with a new cable. LEFT/RIGHT indicator ■ How to replace the detachable cable Pin The detachable connector is very delicate. Only pull or attach in a straight motion to prevent malfunction. How to detach the cable Hold the connector and pull straight out in the direction shown by the arrow.
Care ••For long-time storage, keep the product in a well-ventilated place without high temperatures and humidity. ••The earpads deteriorate over time due to use or storage. For information about replacing earpads or other parts, or for information about other serviceable parts, contact your local Audio-Technica dealer. Get into the habit of regularly cleaning the product to ensure that it will last for a long time. Do not use alcohol, paint thinners or other solvents for cleaning purposes.
Specifications Closed-back dynamic Type 53 mm Driver 102 dB/mW Sensitivity 5 to 45,000 Hz Frequency response 2,000 mW Maximum input power Impedance 48 ohms Input jack A2DC connector jack Approx. 405 g (14.3 oz) Weight (without cable) Included accessories Sold separately ••Cable (3.0 m (9.8')/6.3 mm (1/4") gold-plated stereo plug) ••Balanced cable (3.0 m (9.
MEMO JA EN FR DE IT ES PT RU SC TC KO 8
Audio-Technica Corporation 2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan 2019 Audio-Technica Corporation 中国大陆客户联系资料 制造商:铁三角有限公司 代理商:广州市德讯贸易有限公司 地址:广州市越秀区中山二路31号鸿瑞大厦908室 电话:+86 (0)20 - 37619291 生产标准:GB8898-2011, GB/T13837-2012 原产地:日本 出版日期:2019年 9月 香港及澳門客戶聯絡資料 總代理:鐵三角(大中華)有限公司 地址:香港九龍紅磡民裕街51號凱旋工商中心第二期9樓K室 電話:+852 - 23569268 台灣客戶聯絡資料 進口廠商/製造廠商:台灣鐵三角股份有限公司 地址:32050 桃園市中壢區過嶺里福達路二段322巷6號 服務專線:0800-774488 原產地:日本 132314790-01- 01 ver.1 2019.09.