ATH-ANC300TW User Manual Wireless Noise-Cancelling Headphones
Introduction Thank you for purchasing this Audio-Technica product. Before using the product, please read through the Quick Start Guide and Caution Guide, as well as this user manual when necessary, to ensure that you use the product correctly. Safety precautions Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product.
Safety precautions Cautions for charging case •• Do not disassemble, modify or attempt to repair the product to avoid electric shock, malfunction or fire. •• Do not cover the product with a cloth to avoid fire or injury by overheating. •• Do not subject the product to strong impact to avoid electric shock, malfunction or fire. •• When charging, make sure to use the included USB charging cable. •• Do not charge with devices that have quick-charge functionality (with a voltage of 5 V or more).
Safety precautions Cautions for rechargeable battery The headphones are equipped with a rechargeable battery (lithium ion battery). The charging case is equipped with a rechargeable battery (lithium polymer battery). •• Do not use, leave or store the battery in the following places: –– Area exposed to direct sunlight or high temperatures and humidity –– Inside of a car under the blazing sun –– Near heat sources such as heat registers •• If battery fluid gets into eyes, do not rub them.
Notes on use •• Be sure to read the connected device’s user manual before use. •• When you are not using the USB charging cable, disconnect it from the charging case. •• Audio-Technica will not be liable in any way for any loss of data in the unlikely event that such losses should occur while using the product. •• When you are not using the product, store it in the included charging case. •• On public transportation or in other public places, keep the volume low so as not to disturb other people.
For a more comfortable Bluetooth® communication experience The effective communication range of this product varies depending on obstructions and radio wave conditions. For a more enjoyable experience, please use the product as close as possible to the Bluetooth device. To minimize noise and sound disruptions, avoid placing your body or other obstacles between the product’s antenna and the Bluetooth device.
Part names and functions Headphones L/R (left/right) indicator Multifunction buttons Use to play/pause music and answer phone calls. Also use to adjust the volume (+/–). The L (left) side button has a protrusion for distinguishing between the left and right. Microphone Indicator lamps Displays the operating status and battery level of the headphones. Charging case Cover Battery jack Use to connect the included USB charging cable and charge the product.
Charging the battery Charging the headphones and charging case • Fully charge the battery when using for the first time. • If the rechargeable battery power is running low, the product will play a confirmation tone and voice guidance through the headphones, and the indicator lamps of the headphones will flash in red. If a confirmation tone and voice guidance are played, charge the battery. • It takes about 1 hour maximum to fully charge the headphones, about 2.
Charging the battery • During charging, the 3 charging indicator lamps light and flash as follows to indicate the battery level of the charging case (it may take several seconds for the indicator lamps to light). Battery (charging) status of the charging case Charging indicator lamps Lamp display White Off Light pattern Only left lamp flashing Only center lamp flashing Only right lamp flashing (Fully charged) Lit in white for 10 seconds, and then turns off Charging error All lamps flashing 4.
Charging the battery Charging the headphones using the charging case A rechargeable battery is built into the charging case. If you have charged the charging case, you can charge the headphones without using the USB charging cable. • If the rechargeable battery power is running low, the product will play a confirmation tone and voice guidance through the headphones, and the indicator lamps of the headphones will flash in red. 1. Place the headphones in the charging case.
Connecting via Bluetooth To connect the product to a Bluetooth device, the product needs to pair (register) with the device. Pairing a Bluetooth device • Read the user manual for the Bluetooth device. • Place the Bluetooth device within 1 m (3.3') of the product to perform pairing correctly. • To confirm the progress of the pairing process, wear the product while performing this procedure and listen for the confirmation tone and voice guidance. 1.
Connecting via Bluetooth About pairing When connecting a new Bluetooth device, you need to pair it with the product. Once the Bluetooth device and the product are paired, you do not need to pair them again. The product supports multipairing, in which a connection history is saved. However, in the following cases you will need to pair again even if the Bluetooth device was paired once: • If the product is deleted from the Bluetooth device’s connection history. • If the product is sent out for repair.
Using the product The product can use Bluetooth wireless technology to connect to your device and play music, receive phone calls, etc. Use the product for whichever of these purposes suits your needs. Note that Audio-Technica cannot guarantee the operation of displays, such as the battery level display, or applications via Bluetooth devices. Power supply ON/OFF Power supply Operation Indicator lamps Remove the headphones from the charging case.
Using the product Wearing the product Insert the side of the product marked "L" (LEFT) into the left ear, and the side marked "R" (RIGHT) into the right ear as shown in the figure. Adjust the position of the headphones so that they fit in your ears securely. Listening to music • To connect for the first time, pair the product and your device via Bluetooth wireless technology.
Using the product Talking on the phone • If your Bluetooth device supports telephone features, you can use the microphone built into the product to talk on the phone. • When your Bluetooth device receives a phone call, a ringtone will be heard through the headphones. • If a call is received while you are listening to music, music playback is paused. When you finish the call, music playback resumes.
Using the product Quick hear-through function This function enhances external sound by focusing on people’s voices. The volume of music being played back decreases automatically. It is useful for when you want to listen to public transportation announcements or people’s voices. This mode allows you to hear surrounding sound via the microphone while you are wearing the product. 1. Press the multifunction button on the L (left) side headphone.
Using the product App for smartphones You can use Audio-Technica’s app for smartphones for more convenient use of the product. https://app.at-globalsupport.com Indicator lamps on the headphones The indicator lamp on each headphone indicates the product's status, as explained below.
Voice guidance The headphones play English voice guidance in the following situations. Situation Voice guidance Power is turned on Power on Power is turned off Power off Bluetooth is connected Bluetooth connected Bluetooth is disconnected Bluetooth disconnected Battery level is low Low battery Cleaning Get into the habit of regularly cleaning the product to ensure that it will last for a long time. Do not use alcohol, paint thinners, or other solvents for cleaning purposes.
Eartips Eartip size The product includes silicone eartips in 4 sizes (XS, S, M, and L). At the time of purchase, the M-size silicone eartips are attached. To ensure the best sound quality, select the eartip size that is best suited for you, and adjust the eartips inside your ears for a snug fit. It may be difficult to hear bass sounds if the eartips do not fit snugly in your ears.
Troubleshooting Problem Solution Power is not supplied. • Charge the product. • Charge the charging case. • Press the multifunction buttons on the headphones to turn them on. Unable to pair. • Confirm that the Bluetooth device communicates using Ver. 2.1+EDR or higher. • Place the product and the Bluetooth device within 1 m (3.3') of each other. • Set the profiles for the Bluetooth device. For procedures on how to set profiles, refer to the Bluetooth device’s user manual.
Troubleshooting Problem Solution Sound is distorted / Noise is heard / Sound cuts out. • Turn down the volume. • Keep this product away from devices that emit radio waves such as microwaves and wireless routers. • Keep this product away from TVs, radios, and devices with built-in tuners. These devices can also be affected by the product. • Turn off the equalizer settings of the Bluetooth device. • Remove obstacles between the product and the Bluetooth device and place them closer together.
Specifications Headphones Type Dynamic Driver 5.8 mm Sensitivity 106 dB/mW Frequency response 20 to 25,000 Hz Impedance 14 ohms Microphone Type MEMS type Polar pattern Omnidirectional Sensitivity -32 dB (1 V/Pa, at 1 kHz) Frequency response 100 to 10,000 Hz Communication specifications Communication system Bluetooth version 5.0 Maximum RF output 10 mW EIRP Maximum communication range Line of sight - approx. 10 m (33') Frequency band 2.402 GHz to 2.
Specifications Other Power supply Headphones: DC 3.7 V lithium ion battery/ Charging case: DC 3.7 V lithium polymer battery Charging time Headphones: Approx. 1 hours*1 / Charging case: Approx. 2.5 hours*1 Operating time Continuous transmission time (music playback): Max. approx. 4.5 hours*1 (headphones), Max. approx. 18 hours*1 (if charging case is used in combination) Weight Headphones: Approx. 7 g (0.25 oz) (L side), approx. 7 g (0.25 oz) (R side) / Charging case: Approx. 50 g (1.
Check Headphones Charging case Eartips (XS, S, M, L) COMPLY™ Foam eartips (M) QU ICK ATH-ANC300TW STA USB charging cable RT GU IDE Quick start guide (this leaflet) Caution guide
Charge Charging case Headphones 1 2 USB Type-C™ USB Type-A White Off
Pairing 1 ON OFF (R) (L) White Flashing quickly 2 Or 12:00 Bluetooth (R) 100% (R) ON R_ATH-ANC300TW ON OFF 4SEC White Flashing slowly (L) (L)
Support Music / Phone 2 TIMES 3 TIMES 2 TIMES 3 TIMES For more information on how to use this product and troubleshoot any problems, refer to the user manual on the Audio-Technica website. To more conveniently use the product, use our app for smartphones. www.audio-technica.com (L) (R) Noise-Cancelling (Default) • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Audio-Technica Corporation is under license.
ATH-ANC300TW Caution Guide / Wireless Noise-Cancelling Headphones Guide de mise en garde / Écouteurs sans fil à annulation de bruit Sicherheitsanweisungen / Kabellose Kopfhörer mit Geräuschunterdrückung Guida precauzionale / Cuffie wireless antirumore Guía de precauciones / Auriculares inalámbricos con cancelación de ruido Guia de precauções de segurança / Fones de ouvido sem fio com cancelamento de ruído Руководство по мерам предосторожности / Беспроводные шумоизолирующие наушники 岤䠑✲고䭷⽂ 偽絁꣭㐾羭劼 岤䠑✲갪 搂箁
English Thank you for purchasing this Audio-Technica product. Before using the product read through this caution guide to ensure that you will use the product correctly. Please keep this manual for future reference. ■ Safety precautions - - - - - - - - - Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product.
Communication specifications/Spécifications pour la communication/Kommunikationsdaten/ Specifiche di comunicazione/Especificaciones de comunicación/Especificações de comunicação/ Технические характеристики связи/鸑⥌錞薴/鸒鎝鋊呔/킮 칺퍟 Maximum RF output/Sortie RF maximum/Maximale HF-Ausgangsleistung/Uscita RF massima/ Salida de RF máxima/ Potência de saída de RF máxima/Максимальная выходная мощность радиочастот/ 剒㣐㼘곸鳕ⴀ/剓㣐搂箁㼙걽鱒ⴀ⸆桧/샎 3' 엳 Frequency band/Bande de fréquence/Frequenzband/Banda di frequenza/Banda de frecu
audio-technica For a more enjoyable Bluetooth® product experience Use the product with our Audio-Technica's dedicated smartphone app (for iOS or Android™) for a better user experience. By default, the product is set to a connection codec that prioritizes sound quality. However, there is a possibility that the connection status may become unstable, including the sound being interrupted, depending on the usage environment.
audio-technica ~H±O)J:. -?- 1--7 ;;,t/J'tD"7 1) (iOS/ Android™)~ C::flJJf.! L,t.:.t.: t~c -~~~~~~;E~~-?>~8~~1')*~ *77 1)~:ti~:J-7•y?~ rsscj ,.:~1!9 -?>2:c~, -~~fm:/J<~59-?,$@:1J<~t) *9o Connect App iOS, Android audio-technica ,....., ATH-XXXXXX My Earphone ATI-1-XXXXXX ,'__--::)=.;.,-,:...~-,- -------,> ,________ ____ .,, I :::· ► A ..c:::,..
(/f) Statement of Compliance English F~~m~fim~~~n•~~~~~• Suoml Statement of Compliance Statement of Compliance Hereby, Audio- Technica Corp., declares that ATH-ANC300TW Is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following lntemet address: eu.audio-technica.com/doc Audio-Techn1ca·eorp. vakuuttaa. etti radlolaitetyyppi ATH,ANC300TW on direktiivin 2014/53/EU mukainen.
@ audio-technica I English I I ~~s:o;::10o!~~t~~e;::~~1s:p~:::~i~!~~~~yes~~~:,p11cableIn Espafiol recoglda selectlva de reslduos) shall not be treated as household waste.