AT-LP60X User Manual Automatic Belt-Drive Turntable
Introduction Thank you for purchasing this Audio-Technica product. Read through this user manual before using the product to ensure its correct use. Also, keep this manual for future reference. This product can be used only in the countries where the product is sold. Make sure that the operating voltage and the plug of AC adapter of the product are correct for the country you live in. Package contents Make sure that you have all the included items listed below before using this product.
Safety precautions Safety precautions Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product. For customers in the Canada IC statement: CAN ICES-3 (B)/NMB-3(B) Important information Warning: To prevent fire or shock hazard, do not expose this apparatus to rain or moisture. Notes on use Caution: •• Do not expose this apparatus to drips or splashes.
Part names and functions 5 5 1 2 6 7 3 8 4 9 10 11 12 13 14 15 16 17 11 Platter speed button Select the platter speed (33-1/3 or 45 RPM). 1 45 RPM adapter (shown in receptacle) Adapts 7" records with large center holes to fit center spindle. 12 START button Spins the platter and moves the tonearm. 2 Platter 13 STOP button Returns the tonearm to its original position and stops the platter. 3 Spindle 4 Felt mat 5 Dust cover hinge holders Attachment points for dust cover hinges.
Preparation for use 2. Place the belt on the motor pulley (brass-colored). Installing the turntable • •• Mount the product on a level surface. avoid the effects of vibrations and acoustic pressure, do not mount the product next to such items as speakers. •• The product may pick up radio static if placed next to a radio. Therefore, try to keep the product away from radios. •• If the product is near equipment (cell phone, etc.) that emits strong radio waves, noise may occur.
Preparation for use Rotating the platter Connecting the device Align the settings for the pre-amplifier selector switch and connect the RCA audio cable to an input jack that is compatible with the connectable equipment you are using (amplifier, receiver, active speakers, sound card, etc.). 1. Using your hands, rotate the platter ten times. • • Remove the tie that locks the tonearm and press the tonearm lift button to lift the tonearm.
Playing a record Before playing a record Manual operation Lower the volume of the amplifier, speakers, etc. sufficiently. 1. Remove the cartridge’s protector. • Pull the protector straight forward to remove it. • Applying a downward force may cause the stylus to come off the body. Only low volume is output if the stylus has come off, or is about to come off, so refer to “Replacing the stylus” on p. 9 to reattach the stylus correctly. 1. Press the tonearm lift button.
Playing a record Care Pausing the record Turntable body 1. After lowering the volume of the amplifier, speakers, etc. sufficiently, press the tonearm lift button to lift the tonearm. •• When the turntable body is dirty or dusty, first disconnect the AC adapter, and then wipe off the dirt and dust with a soft, dry cloth. •• Do not use benzenes, thinners, etc.
Replacing the stylus Replacing the belt •• The belt is a consumable part. Replace the belt if the speed of playback slows down or irregular rotation occurs. As a rule of thumb, we suggest replacing the belt once a year. •• Before replacing the belt, be sure to disconnect the product’s AC adapter from the outlet. Removing the stylus •• In addition to the deterioration of sound quality, records may also be damaged as the cartridge’s stylus tip wears down.
Replacing the belt When the turntable is moved 5. Place the belt on the motor pulley (brass-colored). Using the product's original packing materials, wrap the turntable in the reverse order from when you unwrapped it. If you do not have the packaging materials, take the following measures: • Grasp the belt that was attached in step 3 and, while pulling it, place it on the brass motor pulley.
Troubleshooting Problem Solution The platter does not spin. •• Is the AC adapter connected to the outlet? Connect the AC adapter to the outlet. •• Has the belt slipped from the platter? Correctly place the belt on the platter. •• Is the belt placed on the motor pulley? Check that the belt is placed on the motor pulley (brass-colored) correctly. •• Has The platter spins, but there is no sound or the volume is not loud enough. the belt been damaged? Replace it with a new belt.
Specifications Type Belt-drive, fully automatic operation Motor DC servo-controlled Speeds 33-1/3 RPM, 45 RPM Turntable platter Aluminum Wow and flutter < 0.25% (WTD) at 3 kHz Signal-to-noise ratio > 50 dB (DIN-B) Cartridge Type VM Outputs levels “PHONO” “LINE” Phono pre-amp gain 2.5 mV nominal at 1 kHz, 5 cm/sec 150 mV nominal at 1 kHz, 5 cm/sec 36 dB nominal, RIAA equalized Power supply requirements 100 to 240 V, 50/60 Hz, 0.6 A Max. Power consumption 1.
