User's Manual

ManualsBrandsAudio Resource Group ManualsElectronics900MHz Stationary Transmitter

DEAR ARG CUSTOMER,

Congratulations and thank you for purchasing ARG’s 900MHz stationary transmitter. This device is

easy to mount, convenient to operate with clear display and provides high-fidelity audio

enjoyment. All of ARG’s high quality products are designed to provide many years of reliable

service; they are uncomplicated to use so anyone can operate them with ease and confidence. I

am certain that after using your newly purchased product you will join ARG’s long list of satisfied

customers.

This manual contains basic product infor mation to ensure trouble free operation, so please take

time to read through this manual thoroughly before using. If for any reason you have additional

questions you can call our headquarters toll-free at (888)-468-4552 and talk to one of our

professional sales team members who will be happy to help you Monday through Friday between

the hours of 8:00AM and 5:00PM Central Standard Time; you can also email ARG at

info@argaudio.com or visit our website at www.argaudio.com for additional resources and

product options.

Everyone at ARG is firmly c ommitted to our motto, which isn’t just a tagline, it’s our a ssurance

that ARG’s high quality products will meet your expectations for many years to come.

Every word...every sound…HEARD, UNDERSTOOD.

Again, on behalf of everyone at ARG, Thank you!

Rick Allerdings, President

Summary of content (5 pages)

PAGE 1
DEAR ARG CUSTOMER, Congratulations and thank you for purchasing ARG’s 900MHz stationary transmitter. This device is easy to mount, convenient to operate with clear display and provides high-fidelity audio enjoyment. All of ARG’s high quality products are designed to provide many years of reliable service; they are uncomplicated to use so anyone can operate them with ease and confidence. I am certain that after using your newly purchased product you will join ARG’s long list of satisfied customers.
PAGE 2
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Compliance Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
PAGE 3
900MHz Stationary Transmitter It allows the user to transmit the audio wirelessly in a certain range. Connect the audio source to the bal./unbal. Input on the back of the transmitter. Hook up the antenna to the front antenna jack or rear antenna jack and match the antenna selection switch. You can monitor the audio via the headphone jack in front of the panel. In unlock status, set the channel number by pressing Channel UP or Channel DOWN buttons.
PAGE 4
position. When there is digit “16” flash once on the display, it means that the device sampling rate is set at 16KHz; When it is digit “8” flash once on the display, it means that it is set at 8KHz. INPUT SOURCE XLR or 1/4” bal./unbal. input RF output level Set the RF output via RF POWER LEVEL switch at the rear panel.
PAGE 5
Distorted Audio a. Check to see if the source audio is distorted source. Correct or repair the audio source if necessary. b. Reset the Audio Select Switch to match the source. c. Reset the HI-Pass Filter to adjust the frequency response. Reception Troubles No Reception a. Make sure the transmitter channel matches the receiver channel. Reset the frequency following the channel setting in programming procedures. b. Check to see if the antenna is disconnected.