Installation and Operation Manual VCP-010-06(-07)-x Multi-Standard Video Cassette Player Document # 540236 VCP-010-06-x VCP-010-07-x a DeCrane Aircraft Company 7300 Industry Drive, North Little Rock, AR 72117 Phone: 501-955-2929 Fax: 501-955-2988 www.audiointl.
Audio International, Inc. VCP-010-06(-07)-x Installation & Operation Manual Document Revision History Rev. Level Date Description IR 11/2002 Initial Release Reference Documents Document # Description 523772 Rev A4 VCP-010-06-x Outline Drawing 523797 Rev IR1 VCP-010-07-x Outline Drawing Service Bulletin List Service Bulletin # Manual Revision Subject Revision Date Table of Illustrations Section # Subsection # Description Page # I 6.2 Typical Application 6-7 II 9.
Audio International, Inc. VCP-010-06(-07)-x Installation & Operation Manual Table of Contents Section Description Page 1.0 2.0 3.0 4.0 5.0 6.0 GENERAL INFORMATION…………………………………... Introduction……………………………………………………... Purpose of the Equipment……………………………………. Operational Features………………………………………….. Optional Equipment……………………………………………. Technical Specifications………………………………………. Application……………………………………………………… 4 4 4 4 5 5 5 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 INSTALLATION………………………………………………..
Audio International, Inc.
Audio International, Inc. VCP-010-06(-07)-x Installation & Operation Manual VCP-010-06(-07)-x Multi-Standard Video Cassette Player SECTION I – GENERAL INFORMATION 1.0 Introduction This manual contains information for the proper installation and operation of Audio International’s (AI) Multi-Standard Video Cassette Player, VCP-010-06(-07)-x. The “-x” in the suffix designates the type of connector utilized; “-1” = Positronic and “-2” = D-Subminiature.
Audio International, Inc. 4.0 VCP-010-06(-07)-x Installation & Operation Manual Optional Equipment AI source equipment can be optionally controlled by infrared remote (AI-RCx-17xxxx). Playback options with this remote include visual search, pause, play, stop, fast forward, rewind, eject, and format. Contact your AI representative for details. 5.0 Technical Specifications Physical Specifications-VCP-010-06-x Housing Weight Dimensions (l x w x h) Aluminum 8.80 lb / 3.99 kg 12.12" x 10.35" x 4.25" 30.
Audio International, Inc. VCP-010-06(-07)-x Installation & Operation Manual 6.1.3 The video output connector (BNC1) allows for connection of the VCP to the video source selector. Since the video source does not have audio switching, it will provide video output only. Separate audio outputs are provided. 6.1.4 If power is interrupted (>250 msec) while a cassette is in the video player, the player will shut down and the cassette must be ejected and reinserted into the VCP to restart playback. 6.1.
Audio International, Inc. VCP-010-06(-07)-x Installation & Operation Manual 6.2.2 The unit can also be configured for IR remote control utilizing AI’s remote control unit AI-RCx-17xxxx and IFR-9A. This following configuration utilizes a +5 VDC digital logic level for activation of infrared commands. Connection to multiple IFR-9A units utilizing the +5 VDC digital logic level connection requires an external Schottkey diode at each IFR-9A unit. This will prevent signal loading. Contact AI for details. 6.2.
Audio International, Inc. VCP-010-06(-07)-x Installation & Operation Manual SECTION II - INSTALLATION 1.0 Prior to Installation 1.1 During the design and layout of the aircraft cabin, careful consideration of the location of this and all other audio/visual modules is necessary. Some of the items to be considered include: • • • • • • • • 2.0 Space Proximity to other devices (i.e. source equipment) Available power supply Length of cable runs Environmental conditions (temperature, humidity, etc.
Audio International, Inc. 2.2 3.0 VCP-010-06(-07)-x Installation & Operation Manual If damage has occurred during shipping, a claim should be filed with Audio International WITHIN 24 hours and a Return Request Authorization Number shall be obtained from AI. Refer to the front cover of this manual for address and telephone number of Audio International, Inc. Repackage the unit in its original packaging materials and return it to AI following instructions given by the AI representative.
Audio International, Inc. 4.0 VCP-010-06(-07)-x Installation & Operation Manual Wiring Requirements 4.1 Introduction The installing agency shall supply and fabricate all external cables. The length and routing of external cables should be carefully studied and planned before attempting installation of the equipment. Allow adequate space for installation of cable and connectors. Avoid sharp bends and placing cables near aircraft control cables.
Audio International, Inc. 4.5 VCP-010-06(-07)-x Installation & Operation Manual AI’s Proprietary RS-485 Data Bus 4.5.1 The VCP-010-06(-07)-x is designed to interface with other Audio International equipment via AI’s proprietary RS-485 serial data bus. The data bus shall be implemented using a twisted shielded pair cable in accordance with NEMA WC 27500 or equivalent. The wire size for the conductors in this cable shall be 22 AWG, MINIMUM. The shield shall be connected as required.
Audio International, Inc. VCP-010-06(-07)-x Installation & Operation Manual 6.2 The VCP-010-06(-07)-x utilizes one (1) 15-pin connector for electrical connections. This connector provides power, left/right audio output, data bus control, infrared input, and four (4) infrared strapping pins for alternate configuration of infrared digital command codes.
Audio International, Inc. 7.0 8.0 VCP-010-06(-07)-x Installation & Operation Manual Post-Installation Test 7.1 Verify +28 VDC power has been connected to the unit. The audio signal output of the unit is generally connected to cabin speaker systems in addition to headphone locations. Verify all connections before supplying power to the unit. 7.2 Load the VCP-010-06(-07)-x with a videocassette tape. Use the front panel controls or the hand-held remote control unit to select PLAY.
Audio International, Inc. 8.
Audio International, Inc. 9.0 VCP-010-06(-07)-x Installation & Operation Manual Reference Drawings 9.1 The following diagrams show the unit dimensions, mounting locations, and connector locations for the VCP-010-06-x.
Audio International, Inc.
Audio International, Inc. 9.2 VCP-010-06(-07)-x Installation & Operation Manual The following diagrams show the unit dimensions, mounting locations, and connector locations for the VCP-010-07-x.
Audio International, Inc.
Audio International, Inc. VCP-010-06(-07)-x Installation & Operation Manual SECTION III – OPERATION 1.0 General Information 1.1 The VCP-010-06(-07)-x can be operated via front panel ‘buttons’ or optionally controlled by infrared remote or AI’s touch screen panel. Digital codes allow the unit to interface with an infrared handheld remote via an infrared receiver, IFR-9A or IFR-485. 1.
Audio International, Inc. VCP-010-06(-07)-x Installation & Operation Manual ILLUSTRATION OF FRONT PANEL BUTTONS (Note that the VCP-010-07-x cover bezel is used for reference only; the button configuration is the same on all VCP-010-06(-07)-x models) 2.0 To Load a Videocassette Tape into the Tape Slot 2.1 Gently insert a videocassette tape into the cassette tape slot. Apply slight forward pressure to the side edge of the tape. The VCP-010-06(-07)-x will gently ‘pull’ the tape into the player.
Audio International, Inc. 3.0 VCP-010-06(-07)-x Installation & Operation Manual Front Panel Button Functions 3.1 Format Button – Press the FORMAT button to switch between PAL and NTSC output modes. 3.2 Stop Button – Press the STOP button to stop videocassette tape playback. 3.3 Rewind Button – While the tape is playing, press the REW button and the tape will reverse direction until the STOP or PLAY button is pressed. This allows for a visual search through the preceding scenes on the videocassette.
