Installation & Operation Manual DVD-021-0x-x Digital Video Disc Player Document # 540125 7300 Industry Drive, North Little Rock, AR 72117 Phone: 501-955-2929 Fax: 501-955-2988 www.audiointl.
Audio International, Inc. DVD-021-0x-x Installation & Operation Manual Document Revision History Rev. Level Date Description IR 11/1998 Initial Release A 8/2000 ECN #5260 B 12/2000 Added Maintenance Information, Section I, 7.
Audio International, Inc. DVD-021-0x-x Installation & Operation Manual Table of Contents 1.0 2.0 3.0 4.0 5.0 6.0 7.0 Description General Information……………………………………………… Introduction…………………………………………………………. Purpose of the Equipment………………………………………… Operational Features……………………………………………… Optional Equipment……………………………………………….. Technical Specifications………………………………………….. Application………………………………………………………….. Video/Audio Disc and Unit Care ………………………………… Page 4 4 4 4 5 5 5 6 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.
Audio International, Inc.
Audio International, Inc. DVD-021-0x-x Installation & Operation Manual SECTION I – GENERAL INFORMATION 1.0 Introduction This manual contains information for the proper installation and operation of Audio International’s (AI) Digital Video Disc Player, Model # DVD-021-0x-x. The “-0x” in the model number designates the specific configuration of the unit. The “-x” in the model number designates the type of connector utilized in installation.
Audio International, Inc. 4.0 DVD-021-0x-x Installation & Operation Manual Optional Equipment The DVD-021-0x-x can be optionally controlled by infrared remote or AI’s touch screen panel. Digital codes allow the unit to interface with an infrared handheld remote via an infrared receiver, IFR-9A or IFR-485. Multiple units can be controlled independently using available programming pins. Playback options with remote or touch screen include visual search, pause, play, stop, fastforward, and rewind.
Audio International, Inc. DVD-021-0x-x Installation & Operation Manual 6.2.2 The unit can also be configured for IR remote control utilizing AI’s remote control unit AI-RC1-17xxxx and IFR-9A. This following configuration utilizes a +5 VDC digital logic level for activation of infrared commands. 6.2.3 The unit can also be configured for Touch Screen or remote panel control (i.e. entertainment control panels).
Audio International, Inc. DVD-021-0x-x Installation & Operation Manual 7.7 DO NOT clean with solvents or other chemical. To clean dirty discs, wipe gently with a soft, lint-free cloth. Start from the center of the disc and move outward in a circular motion. Dust or fingerprints on the disc may cause sound or picture difficulties. 7.8 DO NOT use liquid or aerosol cleaners on the DVD unit. When cleaning heavy dirt from the unit, soak a soft cloth in a weak detergent solution.
Audio International, Inc. 2.2 3.0 DVD-021-0x-x Installation & Operation Manual If damage has occurred during shipping, a claim should be filed with Audio International WITHIN 24 hours and a Return Request Authorization Number shall be obtained from AI. Refer to the front cover of this manual for address and telephone number of Audio International, Inc. Repackage the unit in its original packaging materials and return it to AI following instructions given by the AI representative.
Audio International, Inc. 4.0 DVD-021-0x-x Installation & Operation Manual 3.11 DO NOT expose to sun or bright light. Damage to the sensor will result. 3.12 ESD (Electro Static Discharge) guidelines shall be followed. Wiring Requirements 4.1 Introduction The installing agency shall supply and fabricate all external cables. The length and routing of external cables should be carefully studied and planned before attempting installation of the equipment.
Audio International, Inc. 4.4 DVD-021-0x-x Installation & Operation Manual AI’s Proprietary RS-485 Data Bus 4.4.1 The DVD-021-0x-x is designed to interface with other Audio International equipment via AI’s proprietary RS-485 serial data bus. The data bus shall be implemented using a twisted shielded pair cable in accordance with the standard military specification of MIL-DTL-27500 or equivalent. The wire size for the conductors in this cable shall be 22 AWG, MINIMUM.
Audio International, Inc. DVD-021-0x-x Installation & Operation Manual 6.2 The DVD-021-0x-x utilizes one (1) 15-pin connector for electrical connections. This connector provides power, left/right audio output, data bus control, infrared input, and four (4) infrared strapping pins for alternate configuration of infrared digital command codes. 6.3 Standard configuration requires no infrared strap pins to be connected.
Audio International, Inc. 6.7 DVD-021-0x-x Installation & Operation Manual Pinout Assignment and Descriptions Pin Configuration Pin # Description 1 + 28 VDC 2 Ground 3 R+ Audio Output 4 R- Audio Output 5 L+ Audio Output 6 L- Audio Output 7 Data Bus (A) 8 Data Bus (B) Data Shield to Pin 2 9 Infrared Input + 10 Infrared Input 11 IR Strap 2 12 IR Strap 3 13 IR Strap 4 14 IR Strap Common 15 Reserved 7.0 8.0 Post-Installation Test 7.1 Verify +28 VDC power has been connected to the unit.
Audio International, Inc. 8.2 DVD-021-0x-x Installation & Operation Manual Troubleshooting Chart Problem Possible Cause Solution ½ Unit is improperly installed • Verify +28 VDC power and video input is present ½ No disc in source unit.
Audio International, Inc. 9.0 DVD-021-0x-x Installation & Operation Manual Reference Drawings The following diagrams show the unit dimensions, mounting locations, and connector locations for the DVD-021-0x-x.
Audio International, Inc.
Audio International, Inc. DVD-021-0x-x Installation & Operation Manual SECTION III – OPERATION 1.0 General Information 1.1 The DVD-021-0x-x can be operated via front panel ‘buttons’ or optionally controlled by infrared remote or AI’s touch screen panel. Digital codes allow the unit to interface with an infrared handheld remote via an infrared receiver, IFR-9A or IFR-485. Multiple units can be controlled independently using available programming pins. 1.
Audio International, Inc. 2.0 DVD-021-0x-x Installation & Operation Manual Front Panel Controls The names and functions of the DVD-021-0x-x are as follows: Open / Close button – Press to eject a disc from the disc tray or to load a disc onto the disc tray. Play button – Press to start playback of a DVD disc or audio CD. Skip (backward) button – Press to skip to a previous track. Skip (forward) button – Press to advance to the next track. Pause button - To pause a disc or CD playback.
Audio International, Inc. 4.0 DVD-021-0x-x Installation & Operation Manual Infrared Remote Control ILLUSTRATION OF TYPICAL DVD-021-0x-x REMOTE CONTROL 4.1 Remote Control User Special Instructions 4.1.1 In case batteries begin to lose power, all indicators will flash when any button is pressed. 4.1.2 To replace batteries, remove the battery compartment cover on the back of the unit.
Audio International, Inc. 4.2 DVD-021-0x-x Installation & Operation Manual Remote Operation 4.2.1 Basic Playback - Playing Back a Disc 4.2.1.1 To start playback from a menu screen, press one of the ) UP, DOWN, LEFT or RIGHT arrow buttons ( on the Menu Selection keypad or the number buttons or the numerical keypad to select the desired title. Press the ENTER button. The DVD video player will start playback from the selected title. 4.2.1.2 To pause playback (still mode), press during playback.
Audio International, Inc. DVD-021-0x-x Installation & Operation Manual 4.2.1.8 To play back a DVD in slow motion, during playback, press the SLOW button. The playback speed will reduce to half of the normal speed. Each time the SLOW button is pressed, the slow-motion speed changes: 1/2 normal speed, 1/8 normal speed, 1/16 normal speed. To return to normal playback, press . Audio is muted during slowmotion playback. 4.1.2.
Audio International, Inc. DVD-021-0x-x Installation & Operation Manual 4.2.2.3 To locate a specific chapter or track number, press T. Press the down arrow ( ) to highlight the space next to chapter. Press the corresponding number on the numerical keypad to select the chapter or track desired. The +10 button may be utilized to select numbers from 10 through 99. (Press 1 and 5 for 15, 2 and 3 for 23, etc.) Press to start playback from the selected chapter or track.
Audio International, Inc. DVD-021-0x-x Installation & Operation Manual 4.2.3.3 To repeat a specific segment repeatedly, press A-B RPT at the beginning of the segment (point A) you want to play repeatedly. Press A-B RPT again at the end of the segment (point B). The DVD automatically returns to point A and starts repeat playback of the selected segment (AB). To resume normal playback, press CLEAR on the number keypad. (NOTE: A segment can only be specified within the current title.) 4.2.
Audio International, Inc. DVD-021-0x-x Installation & Operation Manual 4.2.4.4 Press while the MEMORY menu appears on the monitor screen and the DVD will start memory playback. 4.2.4.5 To change the programmed items, while the MEMORY menu appears on the monitor screen, press or to move the highlighted bar to the item to be changed. Change the item following the instructions above. 4.2.4.
Audio International, Inc. DVD-021-0x-x Installation & Operation Manual 4.2.6.2 The camera angle can be changed during still playback. The camera angle changes to the new setting when normal playback is resumed. While playing back a title that contains at least one scene recorded from multiple angles, the angle icon indicator illuminates in the DVD display. To turn ‘OFF’ the angle number indication, press CLEAR. 4.2.7 Advanced Playback - Selecting a Language 4.2.7.
Audio International, Inc.
Audio International, Inc. DVD-021-0x-x Installation & Operation Manual 4.2.8.2 To select a Subtitle Language, press SUBTITLE SELECT during playback. The abbreviation of the language appears instead of the language name. Refer to the appendix for languages and their abbreviations. Press SUBTITLE SELECT or while the subtitle setting appears on the monitor screen. Each time SUBTITLE is pressed, the subtitle languages included SELECT or on the DVD disc will change. (The arrow cycles backwards.) 4.2.8.
Audio International, Inc. 4.3 DVD-021-0x-x Installation & Operation Manual Function Setup-Customizing the Function Settings 4.3.1 Displaying the SET UP MENU screen: 4.3.1.1 The default settings can be changed to customize the performance to your preference. 4.3.1.2 The SET UP MENU screen will ask you to select a setting category from AUDIO SETTING, FUNCTION and DISPLAY. The selected category will provide the setting details using the succeeding screen. 4.3.1.3 Press SET UP during the stop mode.
Audio International, Inc. DVD-021-0x-x Installation & Operation Manual 4.3.2.3 When AUDIO OUT SEL. is selected, select the output sound type AC-3 or PCM by pressing or and then pressing ENTER. Select the output sound type according to the system connection. 4.3.2.4 When D RANGE CONTROL is selected, select ‘ON’ or ‘OFF’ by pressing or and then press ENTER. By selecting ‘ON’, the dynamic range is reduced. By selecting ‘OFF’, the full dynamic range is maintained.
Audio International, Inc. DVD-021-0x-x Installation & Operation Manual 4.3.3.6 Press SET UP and the setting screen will disappear. If the RETURN button is pressed while a menu appears on the screen, the screen will return to the previous menu screen displayed. 4.3.4 To Specify Display Settings: 4.3.4.1 After selecting DISPLAY on the SET UP MENU screen, press or to select the item. Press ENTER. The setting screen of the selected item will appear. 4.3.4.
Audio International, Inc. DVD-021-0x-x Installation & Operation Manual 4.3.4.6 When DISC MENU is selected, select a preferred language by pressing one of the arrow buttons ( ) and then press ENTER. To change the language while a disc is inserted, press the TITLE or MENU button to display the disc menu. Press the SET UP button. If the disc menu has only one language, the display does not appear. Press the SET UP button repeatedly to select the language. Press the ENTER button.
Audio International, Inc. DVD-021-0x-x Installation & Operation Manual ½ Press or to select the parental lock level and press ENTER. DVD discs are rated higher than the level selected cannot be played unless the parental lock function has been cancelled. The parental lock level is equivalent to the following USA movie ratings: Level 1:G Level 3:PG Level 4:PG-13 Level 6:R Level 7:NC-17 The parental lock levels for “CAN” (Canada) are included for future use.
