Solutions for better hearing via Instructions for use
Intended use of hearing aids The hearing aid’s mode of action is the reception of sound using a microphone, digital processing of the signal and playback of the amplified sound. CROS/BiCROS hearing systems are utilized under unilateral unaidable hearing conditions. Last revised: 13.07.2011 audifon declares that the product audifon via meets the requirements of the Directive 1999/5/EC. The full text of the Declaration of Conformity can be inspected at manufacturer audifon GmbH & Co.
Inhalt 1. Introduction.......................................................... 2 2. Overview of different styles................................... 3 3. Behind-The-Ear hearing aids.................................. 4 3.1 Construction................................................... 4 3.2 Start-up and operation.................................... 5 3.3 Switching the hearing aids on and off............... 6 3.4 Multi-functional rocker switch......................... 7 3.4.1 Volume selection............
1. Introduction Congratulations on the purchase of your new audifon hearing aids. Your hearing care professional has adjusted the hearing aids to your individual requirements. These instructions are therefore intended to help you use your audifon hearing aids properly. Please read through the following operating and care instructions carefully to avoid malfunctions and faults.
2. Overview of different styles* Model Battery Styles From page M 13 Behind-The-Ear 4 S 312 Behind-The-Ear 4 IS+ 13 In-The-Ear 14 We recommend to use audifon zinc air batteries. Please follow the instructions on the battery packaging. Please dispose of used batteries in the appropriate containers at your health care professional’s premises. Always switch your hearing aids off after use. Remove the battery if your hearing aids are out of use for long periods.
3. Behind-The-Ear hearing aids 3.1 Construction Your CROS/BiCROS System consists of transmitter and receiver and contains of the following components: 1 2 3 4 5 6 Earhook Microphone inlet Rocker switch Tag for transmitter/receiver Battery compartment and ON/OFF switch Battery compartment lock 5 2 3 1 1 4 5 6 Transmitter Receiver Note: Your hearing aids may differ from the illustrations.
3.2 Start-up and operation To start your hearing aids first insert a battery in the battery compartment. Remove a battery from its packaging. Note: If you are using a zinc air battery, remove the protective film and wait a few minutes before inserting it. Hold the hearing aids upright as shown in the picture and gently rock them on a hard surface, i.e. table top. The door will open to OFF position. Now you are able to open the battery compartment completely. Insert the battery in the battery compartment.
3.3 Switching the hearing aids on and off Switching on Your hearing aids are switched on and off via the battery compartment. To turn on, simply close the battery compartment. The battery compartment snap into place noticeable. The hearing aids are now switched on. After a preset delay, the first program will be activated and the hearing aids will be ready for use. Switching off To switch the hearing aids off, hold the hearing aid upright and rock it on a hard surface until the door snaps open.
3.4 Multi-functional rocker switch + Your hearing aids feature a multifunctional rocker switch for controlling the volume and – selecting the different programs. The rocker switch can be used by pressing the top end (+) and the bottom end (-). The rocker switch can be programmed with one of three functions. Your hearing care professional has marked which of the functions has been set for your hearing aids here: Volume control Press briefly to adjust the volume (see also 3.4.1).
3.4.1 Volume selection + The volume can be adjusted incrementally – using the rocker switch. Pressing the top end of the switch briefly increases the volume, pressing the bottom end briefly reduces the volume. The hearing aids will return to the default volume setting each time they are turned on. To adjust the volume, press the rocker switch accordingly. Each time you press the switch, you will hear an audible confirmation.
3.4.2 Selecting the hearing programs Rocker switch Your hearing care professional will have adjusted your hearing aids to various hearing situations with you and assigned these to certain hearing programs. The rocker switch allows you to switch between the hearing programs. Simply hold down one end of the rocker switch until you hear audible confirmation of the change of program. The number of signals indicates the number of the selected program. You can switch up or down through the hearing programs.
Hearing program Description of setting 1. 2. 3. 4. Note: Volume control and program selection are optional functions. Your hearing care professional will set your hearing aids to your individual requirements.
3.5 Care instructions Do not use a damp cloth to clean your hearing aids. Always use a soft, dry cloth. The earmold and the flexible plastic tubing attached to them must be detached from the earhook before cleaning. Only use recommended products for cleaning the earmold. with earmold Thin tubes and hearing aid can separated by using the bolted connection. Replace the Dome for cleaing the hearing aid.
4. In-The-Ear hearing aids 4.1 Construction Your CROS/BiCROS System consists of transmitter and receiver and contains of the following components: 1 2 3 4 Microphone inlets Battery compartment Volume control* Program switch* 1 1 4 2 2 3 Receiver Transmitter Note: Your hearing aids may differ considerably from the illustration as they have been made according to your individual ear impressions. * Depending on which type you have, your hearing aids may not feature the elements marked with an *.
4.2 Start-up and operation To start the device first insert a battery in the battery compartment. Remove a battery from its packaging. Note: If you are using a zinc air battery, remove the protective film and wait a few minutes before inserting it. Open the battery compartment carefully with your finger nail at the opening edge and swing it right out. Insert the battery in the battery compartment. Make sure the (+) symbol on the battery matches the (+) symbol on the battery compartment.
4.3 Switching the hearing aids on and off The on off 14 hearing aids are switched on and off by closing/opening the battery compartment. Hearing aids switched on: battery compartment closed. Hearing aids switched off: battery compartment open.
4.4 Volume selection (hearing aids with volume control) When you switch your hearing aids on, they will be at the volume set for you. Increase right ear left ear volume: slowly turn the controller forwards. Reduce volume: slowly turn controller backwards. Once you have reached the upper or lower volume limit, you will hear a clear signal. With easyclick technology activated all settings on rocker switch results in instant, identical change in the other hearing aid.
4.5 Selecting the hearing programs (for hearing aids with a program switch) Press the program switch on your hearing aids to run through the various hearing programs. Each time you press the program switch the next hearing program will be activated. An audible signal confirms each program change. With easyclick technology activated all settings on rocker switch results in instant, identical change in the other hearing aid. Your hearing aids can be run from both sides. Hearing program 1. 2. 3. 4.
4.6 Care instructions Do not use a damp cloth to clean your hearing aids. Always use a soft, dry cloth. Your hearing aids feature earwax protection to protect them against the build-up of earwax inside. This must be cleaned or replaced at regular intervals to protect the electronics of the hearing aids. Changing the earwax protection filter 1. Take the changing tool and turn it with the threaded side into the now visible filter ring. 2. Remove the filter. 3.
5. Safety instructions If any unexpected side effects should occur from using your hearing aids (e.g. skin irritations, increased build-up of earwax), consult your physician or hearing care professional. Do not force the battery into the battery compartment. If it does not fit, check whether you are inserting it correctly and that it is the correct type of battery (see page 3). Important safety information: Keep batteries and hearing aids away from children and pets.
To prevent damage to your hearing aids, do not wear your hearing aids in the following situations: when swimming, in the shower or in the bath when washing or blow-drying your hair when using hair spray during high-frequency heat therapy treatment during x-rays, NMRI or similar radio therapy Never expose your hearing aids to any form of heat or electromagnetic radiation (e.g. microwave radiation). Please contact your hearing care professional for further technical information.
6. Troubleshooting If you experience any malfunctions when using your hearing aids, this does not necessarily mean that they are faulty.
7. Environmentally-friendly disposal Old hearing aids and batteries must not be disposed off with your household waste. Please return your old hearing aids and batteries to your hearing care professional for environmentally-friendly disposal.
FCC ID YU2-VIAS FCC ID YU2-VIAM FCC ID YU2-VIAISX 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
8. Service Have your hearing aids checked regularly.
Date Hearing care professional, stamp Date Hearing care professional, stamp Date Hearing care professional, stamp 24
Date Hearing care professional, stamp Date Hearing care professional, stamp Date Hearing care professional, stamp 25
Warranty card User name Address City, State, ZIP-/Postcode Telephone Email Date of issue R Model Size Serial # Warranty Battery L Model Size Serial # Warranty Battery
Warranty card You have chosen high quality hearing aids from audifon. Your hearing care professional offers a month warranty from the date of purchase (date of invoice) on our hearing aids. The guarantee obligation applies to material and factory defects. It does not cover batteries, chemical or electrochemical effects, wear and tear or mechanical damage due to improper handling. The right to claim under warranty is void if you or any unauthorized third persons carry out alterations or improper repairs.
High-tech made in Germany audifon GmbH & Co. KG Werner-von-Siemens-Straße 2 99625 Kölleda Germany Phone Fax +49-3635-4056-590 +49-3635-4056-589 contact@audifon.com www.audifon.
