QUICK START GUIDE v1.1 connect with us. facebook.com/audient twitter.com/audientworld youtube.com/audienthampshire .audient.com www.audient.
Thank you for purchasing this audient product! Basic Setup & Routing with ADAT Enabled Interfaces 7. Plug microphones into the rear panel XLRs (16) and D.I (6) sources into channels 1 or 2 on the front panel if required ASP880 is an 8 channel mic pre, with sweepable high pass filters, switchable input impedance, balanced insert points and pristine analogue to digital conversion. 1. Connect the supplied IEC cable from ASP880 (12) into an available mains socket 8.
Clocking: Further Information ASP880 can also be clocked from external devices via the BNC Word Clock input (13). To do this connect a 75Ω BNC cable from the word clock output of the master clock device to the word clock input on the back of ASP880 (13). On the front panel of ASP880, press the sample rate button (11) until the button flashes or illuminates green.