The portable symphony Compact Stereo System STB-2812 User’s Guide http://www.audex.
Welcome 1 Contents 2 This package contains the following: 1. Main unit Thank you for your purchase of the Audex 2. 5V DC power adaptor STB-2812 Compact Stereo System, a portable 3. USB Extension Cable and wireless hi-fi device that’s perfect for playing 4. Quick Guide all your MP3/MP4 music files. Easy to connect and 5. User's Guide easy to use, it provides big sound from a small package.
Functional Parts 3 4 Power Source Three different speaker power sources: 1. Insert 4 AA alkaline batteries into the battery compartment according to the instructions. + + AA AA AA AA + + - Pairing Speaker Release/ On-Off Volume Down Volume Up 2. Connect the USB cable to the USB port of any PC.
User's Guide 3. 5V DC power adaptor 5 6 Pairing with a Bluetooth Stereo Adapter Note: The STB-2812 must connect with an audio source that supports streaming stereo sound. Some newer devices have this function built-in (P Cs, mobile phones). However, for older devices you must use an accessory adapter, usually connected to the USB port. This is not included with the STB-2812. Pairing with the stereo adapter Place the STB-2812 and the adapter within 30cm of each other and follow these steps: 1.
Pairing with a Bluetooth Stereo Adapter 7 8 Operating Instructions Volume Control Pairing with an additional device Adjust the volume by pressing “Vol+” or “Vol-“ button. The Audex STB-2812 can store pairing information for up to eight different devices at a time. The device IDs are stored in the order they were created. “Vol-” If a new device is added after the list is full, the oldest “Vol+” ID on the list is removed. Any of the eight paired devices can initiate a connection with the STB-2812.
Operating Instructions 9 10 FAQ (Troubleshooting) Q: Why doesn't the LED flash when I hold the pairing button? Battery Replacement A(1): Insure there is power to the unit. Please use alkaline batteries only. 1. Align batteries in the compartment according to the printed label. 2. Don't mix new and used batteries. 3. Don't use different types of batteries at the same time. Q: What should I do if the STB-2812 does not pair successfully with another device? A(1): Make sure the mating device is on.
Specifications Dimensions: 160mm x 72mm x 32mm LED Indicator Blue LED, Power/Pairing/Connection Red LED ,low battery detect Bluetooth Profile Supported Advanced Audio Distribution Profile (A2DP) Fully Bluetooth V1.2 compliant Power supply 4xAA alkaline batteries power supply USB power supply 5V DC adapter Using 4xAA alkaline batteries, provides more than 20 hours of playing time.
Safety Information Use in a public place 13 14 Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the user's authority to operate the equipment. Any change to the equipment will void FCC grant. In order to prevent electronic interference, please turn off this device in hospitals or other areas with sensitive or emergency equipment. This Bluetooth® device may interfere with the normal function of some hearing aids.