MSDS

ManualsBrandsAttwood ManualsBuilding materials2.8 oz. White Sealant

MATERIAL SAFETY DATA SHEET

Attwood Polyurethane Sealant

SECTION 1 – PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME: Attwood Polyurethane Sealant White PRODUCT CODE: 30106-6

MANUFACTURED FOR: Attwood Corporation

1016 North Monroe Street

Lowell, MI 49331

PHONE: (616) 897-2290

FAX:

EMERGENCY PHONE: (800) 424-9300 or (703) 527-3887 - Chemtrec

DATE: August 24, 2008 SUPERSEDES:

SECTION 2 – COMPOSITION/INFORMATION ON HAZARDOUS INGREDIENTS

This product consists of a mixture/preparation.

CAS NO. INGREDIENT WT % LETHAL DOSES EXPOSURE LIMITS

TWA STEL Ceiling

ppm mg/m

Inhalation LC50 –

5,000 ppm/4hr (rat)

OSHA 100 435 - - - -

Oral LD50 –

4,300 mg/kg (rat)

NIOSH 100 435 150 655 - -

ACGIH

100 434 150 651 - -

1330-20-7 Xylene 3-7

Dermal LD50 –

>1,700 mg/kg (rabbit)

CANADA 100 434 150 652 - -

OSHA - 5 - - - -

NIOSH - 2

- - - -

ACGIH - 2 - - - -

1305-78-8 Calcium Oxide

1-5 Not established

CANADA - 2 - 4 - -

Inhalation TCLo –

250 mg/m3/6hr (rat)

OSHA - 15

- - - -

Oral LD50 –

>24,000 mg/kg (rat)

NIOSH

- - - - -

ACGIH - 10 - - - -

13463-67-7 Titanium dioxide

1-5

Dermal LD50 –

>10,000 mg/m

(rabbit)

CANADA - 10, 5

- - - -

OSHA - - - - 0.02 0.2 Inhalation LC50 –

178 mg/m

(rat)

NIOSH 0.005 0.050 - - 0.020

0.2

ACGIH 0.005 0.051 - - - -

101-68-8 Diphenylmethane

diisocyanate (MDI)

0.5-1.5

Oral LD50 –

2,200 mg/kg (mouse)

CANADA 0.005 0.051 - - 0.02 0.2

OSHA 100 435 - - - -

Oral LD50 –

3,500 mg/kg (rat)

NIOSH 100 435 125 545 - -

Dermal LD50 – 17,800

µL/kg (rabbit) ACGIH

100 434 125 543 - -

100-41-4 Ethyl benzene 0.5-1.5

Inhalation LCLo – 4,000

ppm/4hr (rat) CANADA 100 434 125 542 - -

ACGIH – Biological Exposure Index (BEI).

Under normal conditions of use, no respirable particles should be released from this product.

NIOSH permissible exposure limits for calcium oxide are as follows: TWA 2 mg/m

; IDLH 25 mg/m

OSHA – Total dust.

NIOSH – No threshold has been determined; limit occupational exposure to lowest feasible concentration.

CANADA – Total dust; respirable dust, respectively.

NIOSH – Value based on an exposure time of 10 minutes.

Page 1 of 9

Summary of content (9 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET Attwood Polyurethane Sealant SECTION 1 – PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: Attwood Polyurethane Sealant White MANUFACTURED FOR: 30106-6 Attwood Corporation 1016 North Monroe Street Lowell, MI 49331 (616) 897-2290 PHONE: FAX: EMERGENCY PHONE: DATE: PRODUCT CODE: (800) 424-9300 or (703) 527-3887 - Chemtrec August 24, 2008 SUPERSEDES: SECTION 2 – COMPOSITION/INFORMATION ON HAZARDOUS INGREDIENTS This product consists of a mixture/preparation. CAS NO.
PAGE 2
MATERIAL SAFETY DATA SHEET Attwood Polyurethane Sealant SECTION 3 – HAZARDS IDENTIFICATION Please note that as a service to our customers, hazard warnings and information have been included for ALL chemicals listed in this MSDS. However, not all of these chemicals are defined as “hazardous” by ISO or OSHA standards. Only those chemicals listed in Section 2 of this MSDS are defined by ISO and/or OSHA as “hazardous” based upon the properties and concentrations of each chemical.
PAGE 3
MATERIAL SAFETY DATA SHEET Attwood Polyurethane Sealant SECTION 6 – ACCIDENTAL RELEASE MEASURES PERSONAL PRECAUTIONS: Observe all personal protective equipment recommendations described in Sections 5 and 8. ENVIRONMENTAL PRECAUTIONS: Disposal of collected product, residues, and cleanup materials may be governmentally regulated. Observe all applicable local, state and federal waste management regulations. METHODS FOR CLEANING UP: Ventilate area. Extinguish all ignition sources. Contain spill.
PAGE 4
MATERIAL SAFETY DATA SHEET Attwood Polyurethane Sealant FREEZING / MELTING POINT: ODOR THRESHOLD: EVAPORATION RATE: % VOLATILE BY VOLUME: VOLATILE ORGANIC CONTENT (VOC): NOTE: Not Applicable Not Determined Not Applicable Less than 9% Product Wt% g/L lbs/gal Textured 4.84 56 0.47 50 5.94 72 0.60 50NS 6.29 76 0.63 The above information is not intended for use in preparing product specifications.
PAGE 5
MATERIAL SAFETY DATA SHEET Attwood Polyurethane Sealant INHALATION: ORAL: SPECIFIC EFFECTS: CARCINOGENICITY: XYLENE: Vapor overexposure may cause drowsiness, irritate eyes, nose, and throat, or injure blood, liver, or central nervous system. Prolonged inhalation of dust (including titanium dioxide in dust form) may cause respiratory effects including pulmonary fibrosis (scarring of the lungs).
PAGE 6
MATERIAL SAFETY DATA SHEET Attwood Polyurethane Sealant Environmental Toxicity: FOR MDI: Environmental Fate: Environmental Toxicity: FOR ETHYL BENZENE: Environmental Fate: Environmental Toxicity: This chemical is expected to be toxic to aquatic life. TLm (Mosquito Fish): 240 ppm/24hr – toxic TLm (Sunfish): 100 ppm/3hr – toxic TLm (Vector snail): 300 ppm/24hr – lethal Aquatic: Rapidly hydrolyzes to form an insoluble crust. Terrestrial: Will bind with moist soil. No leaching will occur.
PAGE 7
MATERIAL SAFETY DATA SHEET Attwood Polyurethane Sealant SECTION 15 – REGULATORY INFORMATION US FEDERAL REGULATIONS: Occupational Health and Safety Administration (OSHA) Ingredients listed on National Toxicology Program (NTP) Annual Report on Carcinogens The following ingredients are reasonably anticipated to be human carcinogens.
PAGE 8
MATERIAL SAFETY DATA SHEET Attwood Polyurethane Sealant Section 312 Hazard Class: Acute: Yes Chronic: No Fire: No Pressure: No Reactive: No - Section 313 This product contains the following toxic chemicals subject to the reporting requirements of Section 313 of the Emergency Planning and Community Right to Know Act: Chemical Xylene MDI Ethyl benzene CAS No. 1330-20-7 101-68-8 100-41-4 Wt% 3-7 0.5-1.5 0.5-1.5 Threshold Reporting % 1.0 1.0 1.
PAGE 9
MATERIAL SAFETY DATA SHEET Attwood Polyurethane Sealant Chemical Xylene Calcium oxide Titanium dioxide CAS No. Wt% 1330-20-7 1305-78-8 13463-67-7 States 3-7 1-5 1-5 MDI 101-68-8 0.5-1.5 Ethyl benzene 100-41-4 0.5-1.5 Allyglycidyl ether Furan Propylene oxide 106-92-3 110-00-9 75-56-9 <0.01 < 0.002 < 0.001 75-07-0 < 0.