User's Manual

Wireless Resident Monitoring

Solutions

Manual Reset Device (MRD-RF)

Operational Instructions

The HomeFree system was designed to monitor special needs and Dementia

individuals in the care center environment. The Manual Reset Device

(MRD-RF) is one of the many unique elements of this system.

The Wireless Reset Device is a small, lightweight push button unit, carried

by the care center staff member, that can be used to temporary deactivate the

Wireless Monitoring Door Unit alarm (for door alarm bypass) as well as

reset unauthorized exit attempt alerts.

The Manual Reset Device is not for

use outside the monitored area.

arm Reset / Bypass

Button

LED Indicator

Belt Attachment

Clip

PAGE 1
Wireless Resident Monitoring Solutions Manual Reset Device (MRD-RF) Operational Instructions The HomeFree system was designed to monitor special needs and Dementia individuals in the care center environment. The Manual Reset Device (MRD-RF) is one of the many unique elements of this system.
PAGE 2
Deactivating the Wireless Monitoring Door Unit Alert: Once the Wireless Monitoring Door Unit alert has been activated, move to the appropriate door / exit that activated the alarm. Escort the resident out of the range of the Wireless Monitoring Door Unit. Standing relatively close to the Wireless Monitoring Door Unit, hold the Manual Reset Device and press the Reset button. The audible alarm is deactivated and Wireless Monitoring Door Unit is reset.
PAGE 3
FCC Notice The Manual Reset Device Unit MRD-RF complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: 1) This device may not cause harmful interference and 2) This device must accept any interference received, including interference that may cause undesired operation. 3) Changes or modifications not expressly approved by Elmo Tech Ltd could void the user’s authority to operate the equipment.