User's Manual

ManualsBrandsAttenti ManualsElectronicsData Extending Unit

Table Of Contents

1 Introduction

iDEU-810 Installation and Operational Guide

1 Introduction

The new improved Wireless Monitoring Unit (iDEU-810-4) is a versatile

combination of both transmitter and receiver that is designed to extend the

transmission / reception range of HomeFree at Care Centers systems.

The Wireless Monitoring Unit (iDEU-810-4) is one of many specifically

positioned mini control units that are placed at various locations throughout

the facility and are capable of receiving transmission signals from multiple

sources and then transferring these signals to the next Wireless Monitoring

Unit (iDEU-810-4) in the network or directly to the Wireless Monitoring

Base Unit.

The Wireless Monitoring Unit (iDEU-810-4) transmits on an American FCC

tested and approved frequency; whereas the European version (iDEU-810-4)

transmits on a European tested and approved frequency. From a user

interface and functional point of view, the two models are identical,

therefore this installation and operational guide serves both versions.

1-1

Summary of content (9 pages)

PAGE 1
Introduction The new improved Wireless Monitoring Unit (iDEU-810-4) is a versatile combination of both transmitter and receiver that is designed to extend the transmission / reception range of HomeFree at Care Centers systems.
PAGE 2
1.
PAGE 3
1.1.1 LED Panel The faceplate of the Wireless Monitoring Unit (iDEU-810-4) comprises of 4 LEDs (Light emitting diodes). The purpose of each LED is explained in the following table: LED Description and Purpose Reception Blinks when receiving transmission signals Transmission Blinks when transmitting signals Charge Steady light indicates internal battery is fully charged. Charge LED blinks when internal battery is not fully charged Power Steady light indicates external power OK.
PAGE 4
2 Mounting the Wireless Monitoring Unit (iDEU-810-4) For a Wireless Monitoring Unit to receive and transmit signals with maximum efficiency, it should be mounted on a wall or flat surface and positioned upright. The Wireless Monitoring Unit should also be mounted within reach of a power outlet (an electrician my need to install a power outlet near the chosen Wireless Monitoring Unit location). Note that the distance between the wall and the Wireless Monitoring Unit should be at least 10 cm.
PAGE 5
3. Using the template, drill two holes in the wall and place the supplied wall anchors/dowels into these holes. 4. Insert the supplied bolts/screws into the wall dowels, ensuring not to tighten the bolts/screws completely. 5. Holding the Wireless Monitoring Unit with the mounting brackets facing away from you, maneuver the holes on the mounting brackets over the bolts/screws already attached to the wall. 6.
PAGE 6
5. Holding the Wireless Monitoring Unit with the mounting brackets facing away from you, maneuver the Wireless Monitoring Unit to a suitable mounting location. 6. Using sufficient pressure, adhere the mounting bracket on the Wireless Monitoring Unit, to the wall.
PAGE 7
3 Activating the Wireless Monitoring Unit In order to activate the Wireless Monitoring Unit, perform the following: 1. Connect the adapter end of the power supply to a power outlet. 2. Connect the small end of the supplied power supply into the 7.5 VDC power socket located on the side panel of the Wireless Monitoring Unit. The Wireless Monitoring Unit makes three audible beeping sounds. The Charge LED on the front panel flashes when the Wireless Monitoring Unit is first activated.
PAGE 8
4 FCC Notices This note is applicable to the American Wireless Monitoring Unit (iDEU-810-4) NOTE - The Wireless Monitoring Unit (iDEU-810-4) complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
PAGE 9
For Customer Support contact: Home Free Systems Inc. Wireless TelehomeCare Solutions 6629 West Mill Road Milwaukee, WI 53218 USA Toll Free Fax Web: 1-800-606-0661 +1-414-358-8100 http://www.homefreesys.