® SMART XT
Table of Contents: SMART® XT ...................................................................................................................... - 3 SYSTEM OVERVIEW ................................................................................................................. - 3 SMART® XT ......................................................................................................................... - 3 PCE …………………………………………………………………………………………………………………………………. - 4 ACTIVATING THE SMART® XT ......
System Overview: Pro Tech’s SMART® XT is the smallest, lightest and most reliable GPS tracking unit in the industry. The SMART® XT is equipped with a high resolution color LCD screen that enables viewing in bright sunlight. A built-in cell phone allows Supervisors/Officers to speak directly with Offenders. Notifications include LED lights, audible beeps and vibration. SMART® XT: The SMART® XT works seamlessly with Pro Tech’s existing SMART® Ware system.
o Tower-Based Technology – Calculates geographic position based on all known cell tower locations. Used to validate GPS position calculations and as a secondary means of tracking when GPS is not available. o Motion Sensor – Prevents Offender from masking GPS and alerts the Supervising Agency when an attempt occurs. • SMARTGlo™ Backlighting – LCD and touch buttons backlighting gradually goes from low intensity to high intensity instead of simply turning on or off.
Pro Tech also utilizes the latest in mapping technology. The maps utilize Microsoft Virtual Earth. With this mapping feature, Users can choose from three different views for replaying points: Roads, Aerial and Hybrid.
ACTIVATING THE SMART® XT: o STEP 1 – Assign and save the equipment in the software o STEP 2 – Place the SMART® XT in the Base Unit to power up o STEP 3 – Select Right Button to start Activation o STEP 4 – Select Dialing Method DIAL USING BU SETTINGS DIAL USING 8 DIAL USING 9 DIAL NO PREFIX DIAL USING WIRELESS “Contacting Data Center” will be displayed on the screen. Once contact is complete, the unit will begin to search for GPS. SMART® XT will display “Waiting for GPS”.
OFFENDER SCREEN: Select Menu on the Home Screen PRO TECH Mar 13, 2009 3:36:25PM VIBRATE/BEEP: Select/Change how the Offender is notified of an alert/message. If set from the Officer’s Menu, it will lock the option and the Offender cannot change it. VIBRATE/BEEP ID NUMBERS ALARM SET CALL LIST BEEP ONLY TUNE ONLY VIBRATE ONLY VIBRATE & BEEP VIBRATE & TUNE ID NUMBERS: Displays the serial numbers of assigned hardware.
CALL LIST: Offender Call List - Displays list of pre-defined numbers the Offender can call. VIBRATE/BEEP ID NUMBERS ALARM SET CALL LIST List of 6 Approved Phone Numbers Offender Can Call ACCESSING THE OFFICER’S MENU: • To access the Officer’s Menu from an assigned SMART® XT, follow the below button sequence. Scroll through list. • To access the Officer’s Menu from an unassigned SMART® XT, place the unit in a Base Unit connected to a power source first.
VIBRATE/BEEP: Select/Change how the Offender is notified of an alert/message. If set from the Officer’s Menu, it will lock the option and the Offender cannot change it. ID NUMBERS: Displays the serial numbers of assigned hardware. ALARM SET: Accesses the alarm clock function. CALL LIST: Offender Call List - Displays list of pre-defined numbers the Offender can call. PHONE # PREFIX: Changes dialing prefix for Base Unit calls. It is a one-time setting.
Rule Definitions: BRACELET BATTERY: The bracelet battery is getting low; the bracelet must be replaced within 72 hours BRACELET GONE: • Occurs when the Offender is out of range of the tracking device. Therefore, the location of the Offender is unknown. • Pro Tech adds a 5-minute buffer period to all Bracelet Gone violations. This is not a Grace Period. During this time the Offender is not notified of the Bracelet Gone. Only after 5-minutes have passed will the Bracelet Gone rule go into violation.
SMART® XT UNABLE TO CONNECT: It has been over 2-1/2 hours since the SMART® XT has called in. The Offender is not notified of the Unable to Connect and a message cannot be sent to the device. MOTION NO GPS: Occurs when the SMART® XT has accumulated 10 minutes of motion in a 60-minute period without receiving a signal from the GPS satellites. HOME CURFEW: The SMART® XT is NOT in the assigned Base Unit when the Home Curfew schedule is in effect.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
SAR Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. SAR has been evaluated in head and body worn. The use of belt clips, holsters and similar accessories should not contain metallic components. Use of non-approved accessories may violate FCC RF exposure guidelines. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.