3M™ Dual Comm RF Monitoring System RF (E4) Product Overview
1 Introduction to the 3M™ Dual Comm RF Monitoring System 3M Electronic Monitoring offers the new Dual Comm RF Monitoring System – a multi-clientmonitoring unit that is capable of monitoring up to 50 client transmitters within the monitored perimeter. The RF (E4) Receiver unit also has the capability to manage the various program schemes, event configurations, and schedules assigned to each client.
Encrypted communication protocol in accordance with NSA suite B Short messaging and GPRS communication capabilities Enhanced, fast installation Event capturing even when transmitter is out of receiver range Physical Characteristics Dimensions Weight H=90mm H=3.5433 in L=285mm L=11.2205 in W=185mm W = 7.2835 in 1210 g* 2.
Displaying error reports Displaying various configuration options as part of the officers’ configuration screens (which are password protected, and can optionally be totally disabled remotely to ensure absolute security) Four-tamper transmitter support The 3M Electronic Monitoring ankle and wrist transmitters (TX-860 / TXS-860) are equipped with four tamper-detection mechanisms.
In addition, the encryption protocols strengthen the reliability and integrity of communicated messages. The encryption protocol is in accordance with NSA Suite B, namely, AES for symmetrical key encryption and authentication, GCM for block chaining, public key-based certificates, use of the Elliptic Curve Digital Signal Algorithm (ECDSA) for certificate verification, and key establishment.
Dynamic range setting The 3M™ Dual Comm RF Monitoring Receiver unit is equipped with four default range options, which can be configured by the officer and tested at the offender’s residence or remotely from the monitoring center.
In cases where the power loss was caused simply by accidentally unplugging the unit, this notification prompts to reconnect it. Upon completion of an offender’s program and the Receiver’s service is ended, the backup battery is automatically disconnected. This preserves the backup power so it will be available immediately when the unit is activated at the next offender’s premises.
Safety hazard prevention The scope of the 3M™ Dual Comm RF Monitoring Receiver safety features includes: Fire Resistance – Flame resistant material is incorporated into Receiver case material. This provides a V0-94 flammability rating, which reduces the Receiver's risk of fire hazard following an electrical short-circuit or a lightning strike. All plastic materials within the Receiver (such as printed circuit boards, electrical wire coating, etc.) are UL approved with a V0-94 flammability rating.
fire resistance for a polymeric material. The unit case has been tested for free fall and vibration, as well as a range of climate environment standards. FCC Notices The Product complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: 1) This device may not cause harmful interference 2) This device must accept any interference received, including interference that may cause undesired operation.
The Telephone Company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. If trouble is experienced with the Smart Base Unit, model: SBU x000yyy, for repair or warranty information please contact: Pro Tech Monitoring, lnc., 1838 Gunn Highway, Odessa, FL 33556, Phone 888.67.SMART, FAX 813.
