-Piece (AT1) Offender User Guide
1-Piece (AT1) Offender User Guide 1-Piece (AT1) Offender User Guide March 4, 2019 2
1-Piece (AT1) Offender User Guide Copyright ©2019 Attenti. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Attenti. The information in this document is subject to change without notice.
1-Piece (AT1) Offender User Guide SAFETY INFORMATION Please read, understand, and follow all safety information contained in these instructions prior to the use of this Attenti device. Retain these instructions for future reference. Intended Use: This Attenti device is part of an electronic monitoring system, which performs data transfer using cellular and Wi-Fi networks to a monitoring platform.
1-Piece (AT1) Offender User Guide - - • Do not unplug AC/DC adapter by power cord. Handle the adapter by the body only. Do not modify, decorate, or attempt to service the device. Return to Attenti authorized personnel or location for repair or service. There are no user serviceable parts. Do not attempt to charge the device using an outdoor outlet. Only use the AC/DC adapter indoors. Do not expose power adapter to rain, steam or wet conditions.
1-Piece (AT1) Offender User Guide Responding to Vibrations/Flashing LEDs The device will vibrate three consecutive times if an alarm has been generated. View the flashing LED(s) on the top of the device and follow the below steps to clear the alarm. Red PWR The device battery is low. Connect the device to the charger. Once the device is fully charged, it will vibrate once and the PWR LED will be solid green. Disconnect the device from the charger.
1-Piece (AT1) Offender User Guide FCC and Industry Canada Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device is to be used solely by law enforcement agencies for tracking purposes and must be professionally installed.
1-Piece (AT1) Offender User Guide Exposure to Radio Frequency (RF) Energy: This monitor contains radio transmitters and has been designed, manufactured and tested to meet the Federal Communications Commission (FCC) and Industry Canada guidelines for RF exposure and Specific Absorption Rate when used in ankle worn configuration with an Attenti bracelet designated for this product.
