USER MANUAL ATSC CONVERTER BOX CHANNEL ON OFF AT2016 AT2016 Please read this User Manual carefully to ensure proper use of this product and keep this manual for future reference.
Table of Contents Important Safety Instructions....................................................................1 1. Introduction.........................................................................................4 1.1 Remote control ..................................................................................5 1.1.1 Installing the batteries......................................................................6 1.1.2 Using the remote control ....................................................
Important Safety Instructions 1. The apparatus shall not be exposed to dripping or Splashing and that no objects filled with liquids, such as Vases, shall be placed the apparatus. 2. The mains plug is used as the disconnect device, the disconnect device shall remain readily operable. 3. To be completely disconnect the power input, the mains plug of apparatus shall be disconnected from the mains. 4. The mains plug of apparatus should not be obstructed or should be easily accessed during intended use.
1. Read these Instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding - type plug.
Note: 1. Important safety instructions shall be provide will each appliance. These safety instructions may be in the form of a separate booklet, separate sheet, or part of the instruction manual. 2. If included in the instruction manual, the safety instructions shall be located before any operating instructions. 3. These instructions shall be entitled IMPORTANT SAFETY INSTRUCTIONS . 4.
Introduction Thank you for purchasing this product which has been designed and manufactured to give you many years of service. About This User Guide This user guide contains all the information you need to know about how to setup and watch available digital TV channels using this ATSC Converter Box. What's ATSC? Advanced Television system committee, an international organization establishing broadcasting standards for digital (including high-defimtion and data broadcasting) television.
1.1 Remote Control Remote Key Function: AT2016 1. MUTE: Press to mute or unmute the audio output. 2. GUIDE: Press to display the on-screen Electronic Program Guide (EPG). 3. CH+: Press to change the channels in non-menu state. 4. CH-: Press to change the channels in non-menu state. 5. INFO: Press to display information about the channel being viewed. 6. EXIT: Press to completely exit from the on-screen menus. 7. OK: While using the on-screen menus, press ENTER to activate (or change) a particular item.
1.1.1 Installing the Batteries Remove the battery cover from the remote control and put 2xAAA size batteries inside the compartment. The diagram inside the battery compartment shows the correct way to install the batteries. 1.Open the cover O PE 2.Install batteries N 3.Close the cover O PE N 1.1.2 Using the Remote Control To use the remote control, point it towards the front of the digital Atsc Converter Box.
1.2 Front Panel and Rear Panel Illustration 1.2.1 Front Panel CHANNEL ON OFF AT2016 1 2 3 POWER BUTTON: Used to turn on or off of the main power of the unit. REMOTE CONTROL SENSOR: Used to receive the signal from the remote control. STANDBY INDICATOR: Used to visually show power state of the Atsc Converter Box, the red LED will be light if the Atsc Converter Box entered standby mode. 4. CHANNEL UP/DOWN: Used to change the channels in non-menu state. 1.2.
1.3 Connecting The Atsc Converter Box The following diagrams are of typical configurations only, and may differ slightly to your existing external equipment. If you are unsure how to connect to your Atsc Converter Box, always consult your manufacturer's user manual supplied with your equipment. 1.3.1 Connecting Antennas This section tells how to connect an indoor or outdoor antenna to your Atsc Converter Box. You may need a 75~ adaptor or a combiner. NOTES: A.
1.3.2 Connecting to a TV Set TV Aerial (For smart antenna only) ATSC RF IN NTSC L RF OUT R Audio Out CH 3 CH 4 SMART ANT.
1.3.3 Connecting to an Audio System ATSC NTSC RF IN RF OUT VIDEO Video Out L CH 3 CH 4 R Audio Out SMART ANT.
2. On-Screen Menus Ensure all connections have been made following the diagrams on the previous pages for reference. When you plug the power cord of this set-top box into a power outlet and press the POWER switch on the front panel, the box will be turn on for the first time. Press STANDBY button on the remote control will switch the set-top box to or from standby mode. Turn on the TV set and switch it to external AV mode, you will see the picture come from the box.
2.2 Manual Channel Set You can highlight this item and press OK button to confirm it, you will see below menu showing on screen. You can specific the selected channel Viewable or Not viewable , the not viewable channels will be skipped when you do zapping next time. Manual Channel Set Menu Ch 14-1 ATSC-1 Viewable Ch 14-2 ATSC-2 Viewable Ch 14-3 ATSC-3 Viewable To Move OK To Select Exit To Exit 2.
2),The TV Rating system include the following ratings: TV-Y(all children) and TV-Y7(directed to older children),TV-G (general audience), TV-PG(parental guidance suggested), TV-14(parents strongly cautioned), and TV-MA(mature audiences only). The letters FV(Fantasy Violence),V(moderate Violence), S (mild Sexual situations), L(mild coarse Language), D(mature themes suggestive Dialogue) were added to indicate the presence of violence, sex, language, suggestive dialogue respectively.
2.6 Language When this item is highlighted, you can press OK button to change the OSD menu language as you want, there are 3 options: English, Spanish, French. 2.7 Auto Power Down Timer When this item is highlighted, press the OK button you can choose the options: Off, 2 hours, 4 hours. the receiver will enter standby mode according to the specific setting if the latter 2 options chose. 2.
3. Troubleshooting Q: It takes a while to display picture on the screen after turning power on or after changing channel. A: It will take several seconds for this receiver to show the logo or picture after power on sincee the system have to finished the initialization of the main chip and demodulator. In case of digital broadcasting, it could take 1 to 2 seconds to receive data. Therefore, it is not a faulty receiver if the picture display is delayed. Q: There is no picture on the screen.
4. Specification Product Name ATSC Converter Box Receiver Power Supply Input Voltage: 100 - 240V~ 50/60Hz Power Consumption:Maximum 8W,Standby <1W. Decoder Video Format: Standard definition CVBS.
5. Glossary ATSC: Advanced Television Systems Committee. Formed to establish technical standards for U.S. advanced television systems. Also, the name given to the 8-VSB transmission standard itself. NTSC: "National Television Systems Committee" and the name of the current analog transmission standard used in the U.S., which the committee created in 1953. Analog TV: Analog technology has been in use for the past 50 years to transmit conventional TV signals to consumers.