ATW330-4X Wireless Coordinator User’s Manual v.1.0 Apr.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 Important Announcement The information contained in this document is the property of Atop Technologies, Inc., and is supplied for the sole purpose of operation and maintenance of Atop Technologies, Inc. products.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 1 Preface Purpose of the Manual This manual supports you during the installation and configuring of the ATW330-4X, as well as it explains some technical options available with the mentioned product. Who Should Use This User Manual This manual is to be used by qualified personnel or support technicians who are familiar with operations; This manual also provides helpful and handy information for first time users.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 FOR MOBILE DEVICE USAGE (>20cm/low power eg. AP routers) Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Caution Beginning from here there will be extreme caution exercised. Never install or work on electrical cabling during periods of lightning activity.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 2 Introduction 2.1 Product Overview Wireless coordinator is a data transmission medium between picking control PC and all the picking devices. Which is Ethernet architecture product, following up the standard TCP/IP communication protocol to communicate with the host PC.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 3 Getting Started 3.1 Inside the Package Inside the product purchased you will find the following items: Table 3.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 3.2 Front & Power Panels The Front (Figure 3.1), and Power panels (Figure 3.2), are as follow: Figure 3.1 Figure 3.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 3.3 First Time Installation Before installing the device, please adhere to all safety procedures described below, Atop will not be held liable for any damages to property or personal injuries resulting from the installation or overall use of the device. Do not attempt to manipulate the product in any way if unsure of the steps described here, in such cases please contact your dealer immediately.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 3.4 System Setup The following section describes some critical settings for the ATW330-41. 3.4.1 PC IP address View PC Host IP Location This example is 10.3.44.1 Figure 3.3 Figure 3.3 3.4.2 Set up PC IP Use “System controller\wptl _sys.exe” Figure 3.4 Figure 3.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 Enter the setting screen Figure 3.5 Figure 3.5 Figure 3.5 Click the “SYS ID” Enter the setting screen Figure 3.6 “Working IP” Field is set to:10.3..44.1. Click Update to complete the setting Figure 3.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 System Controller ”10. 3. 44. 1” Figure 3.7 Figure 3.7 3.4.3 Set up Wireless coordinator IP Address Use Manager. Click ” Invite” then View Wireless coordinator IP Figure 3.8. Wireless coordinator IP Address default IP 10.0.50.100 ATW330 Figure 3.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 Click on the IP Address field and the ” Config “option. Figure 3.9 . ATW330 Figure 3.9 Enter the dialog screen .Figure 3.10 Figure 3.10 Modify the IP address / gateway to the same network as the PC. Figure 3.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 Figure 3.11 Click “Config Now” to complete the setting, and the wireless coordinator will restart.. Click “Invite” to confirm the IP address to complete the modification. Figure 3.12 ATW330 Figure 3.12 Click “Exit” exit Monitor.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 3.4.4 Wireless coordinator joins system Use Config tool.\WPTLConfig_v.095. Figure 3.13 Figure 3.13 Enter the setting screen Figure3.14 Figure 3.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 Click the field to connect the PC. Figure 3.15 Figure 3.15 Click “connect to sys” connect PC. Figure 3.16 Figure 3.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 Check “SYS ID” SYS ID field is 1 Figure 3.16 Figure 3.16 Click” Add coords” connect Wireless coordinator. Figure 3.17 The Wireless coordinator now makes a "Beep" sound. Click “ok” Confirm the connection. Figure 3.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 Wireless coordinator connection completed. Figure 3.18 Figure 3.18 3.4.5 Connect Wireless Pick To Light Click “Coord ID/Addr”. Figure 3.19 Figure 3.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 Click “Coord config”. Figure 3.20 Figure 3.20 Set up Wireless Pick To Light channel. CH.Mode field options”FIX” Channel List field Select a Wireless Pick To Light channel Default channel 1 this example is 8. New Tag Association field options”open” Click “APPLY” Figure 3.21 Figure 3.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 Click “Add Tags” enter List of new Tag detected screen Figure 3.22 Figure 3.22 Start setting Wireless Pick To Light ID address. Before setting, you must confirm that the tag displays PEND before setting. Figure 3.23 Figure 3.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 Setting Wireless Pick To Light ID address. Figure 3.24 Step1. Press and hold the B key. Step2. Press and hold the A key. (about 1s). Step3. Release the A key. Step4. Press C key to complete ID Address setting. C A A AA B A Figure 3.24 If TAG does not show PEND status, please follow the steps below. Figure 3.25 Figure 3.25. Step1. Press and hold the A key. Step2. Single-click the C key. The LCD will display TSTAG. Step3. Release the A key. Step4.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 Click “OK”. Complete the Wireless Pick To Light ID Address setting. The screen will display Tag ID related information as shown below. Figure 3.26 & 3.27 Figure 3.26 Figure 3.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 4 Specifications 4.1 Hardware Specifications Table 4.1 Item Description CPU 32bit ARM 1GHz CPU Flash Memory 32Mbytes RAM Memory 128Mbytes EEPROM 64Kbits Wireless Radio Band Frequency: 2402- 2480MHz Bands Frequency Channels are selectable by menu control. Transmit Power: Up to 8dBm + 5dBi antenna. (Power: 5dBm+5dBi antenna in European regulations.) Receive Sensitivity: Up to -92dBm. Data Rate: 2Mbps Extend Antenna attached.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 Item Description COM Extend RS-485 port (Reserved). Proprietary protocol. Connector: Terminal Block/Male/5.08mm pitch/4pins. Pin Assign: NC/D+/D-/G LED indication PWR: Power Indicator x 1 RUN: System Status Indicator x 1 Tx/Rx: Between Host & Device Communication x 2. RF: Wireless status Indicator x 1. LAN Indicator: Link & Speed Indicator x 2. Reset/Default Reset: Hold 3sec to Reboot device. Default: 6sec Reset to Factory Default & reboot.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 4.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 4.3 Installation overview Step 1.Use 4pcs M4 * 16mm, button Phillips to fix the product to the wall or beam. Step 2: Connect one end of the ground wire to the product ground screw and the other end to a protective ground terminal block. Warning! The equipment shall be connect one end of the ground wire to the product ground screw and the other end to a protective ground terminal block. Step 3. Connect the network cable and power cable.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 4.4 LED Indicators Table 4.
Atop Wireless coordinator ATW330-4X User Manual V. 1.0 5 Warranty Limited Warranty Conditions Products supplied by us are covered in this warranty for undesired performance or defects resulting from shipping, or any other event deemed to be the result of Atop Technologies’ mishandling.