User's Manual

ManualsBrandsAtoms Labs ManualsCamera & PhotoHD Monitoring System Accessory Camera

QUICK START GUIDE

PRODUCT OVERVIEW

INSTALLING YOUR DEVICES

A. Setting up your monitor

1. Insert the memory card and/or connect HDD device to USB port.

2. Twist on the antenna to the LEFT side of the console.

3. Connect the Ethernet cable from the BACK of the console to your router.

4. Connect the 12V power adaptor and power on the system.

5. Twist on the stand to the back of the console.

Antenna Power Botton

Internet

Router

Mobile Device

Connect system directly after the router. Do not

connect system to router through a hub or switcher.

Enable DHCP and UPnP on your router. TCP port

#6000 and #80 should be opened.

Reset Botton

USB Port

Memory Card Slot

Power Jack

Note: Before using the memory card/ HDD

for recording video, you MUST format the

memory card/ HDD on the console.

KIT CONTENT

Camera / Receiver Antenna

*Camera Stand

*Digital Wireless Outdoor

IR Camera

Ethernet Cable

x 1

Screw Pack (For Camera )

Camera / Receiver Adaptor

Camera power

adapter-5V/1.5A

x 1

HDNVR power

adapter-12V/2A

Digital Wireless Receiver

Console

x 1

Note: Keep distance between device minimum 1 meter.

Monitor

Router

1 M+ 1 M+

1 M+

*Quantity varied subject to conguration

Thumb Screw

B. Installing your camera

1. Secure the camera stand to a stable surface, celling or wall mount using three pcs screws.

2. Loosen the thumb screw of the camera stand and secure the camera body to the bracket.

3. Screw the antenna into rear of the camera.

4. Connect the supplied power adaptor to the camera and the power source. The RED LED

will light up which indicate the camera is ready for setup.

(1) (2) (3)

HD Monitoring System Accessory Camera

AWSC37

Summary of content (4 pages)

PAGE 1
QUICK START GUIDE KIT CONTENT *Digital Wireless Outdoor IR Camera HD Monitoring System Accessory Camera AWSC37 *Quantity varied subject to configuration Digital Wireless Receiver Console *Camera / Receiver Antenna *Camera Stand x1 Screw Pack (For Camera ) Camera / Receiver Adaptor INSTALLING YOUR DEVICES A. Setting up your monitor 1. Insert the memory card and/or connect HDD device to USB port. 2. Twist on the antenna to the LEFT side of the console. 3.
PAGE 2
SYSTEM OPERATION Live View with Quad Display Main Menu 1. Tap 2. Tap to extend quick select menu. to enter main menu. Tap one channel Live-view full screen Tap again to return Tap one channel Show it at left side Live-view full screen 1.Camera Setup: Pair camera, and video quality. 2.Recorder Setup: Setup recording settings such as date, recorder type, and motion area. 3.Event list: Event video playback. Tap again to return 4.
PAGE 3
4. Add New Device Andriod: Tap the "NEW" icon to add new device. iOS: Tap the "+" icno to add new device. 5. Tap the “scan QR code” located on the rear of the device. Also you can enter the ID manually. For iOS 1. Tap the ”+” icon to enter device list 2. Tap [Edit] button 3. Change default password 2 Note: If you have not installed the app to scan the QR code, we suggest to download and install the app “Barcode Scanner ” . 6. Enter the default password "123456".
PAGE 4
For Andriod Push Notification 1. Tap push notification setting 2. Setup interval time of the push a. Enable/disable the push notification: For Andriod For iOS 1. Go to more section to tap Push Notification. 2. Click/unclick to enable/disable the push notification. 3. Enter user name. 4. Tap ”OK” when you done. 1. Tap push setting 2. Setup interval time of the push c. Time period: This function allows you to setup "Do Not Disturb" time. You can setup when Push is to start and end.