ATOMIC Quick Set-Up Guide Thomson: WHP140 RF8398 (900MHz) Manual Tuning Headphones
Congratulations on the purchase of WHP140 (912-913MHz) Stereo RF Wireless Headphones! (Manual Tuning) Please check the supplied component against the following list: 1 x Transmitter (built-in 3.5mm stereo audio cord) 1 x Headphones 1 x Power Supply (AC/DC 12V 200mA Adaptor for Transmitter) 1 x 3.
TRANSMITTER Transmitter Upper Surface: (6) Power LED Indicator Transmitter Bottom: (7) Channel Tuning Knob Transmitter Rear Side: (8) Built-in 3.5mm Stereo audio cord (9) DC IN Socket ACCESSORIES (10) 3.
INSTALLATION Please follow this quick set-up guide to ensure trouble free installation of your headphones. Step 1: Connect the built-in 3.5mm Stereo Audio Cord to the audio output socket of your audio source, e.g. TV, HiFi, CD, DVD player etc. *** If your audio source has 2 RCA output sockets (red and white in color), use the 90mm Y-connection Cord (10) for connection, if necessary.
TROUBLE SHOOTING GUIDE If you encounter any trouble in setting up the Headphones, please check the following points: (1) Distorted sound quality or unclear sound: ~ Check if the sound of your audio source is distorted and whether the volume control is tuned to the suitable level. ~ Make sure that your audio equipment, the transmitter and headphones are powered and switched ON. If the batteries in the headphones have insufficient power, replace fresh ones.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
SPECIFICATION Model WHP140 (900MHz) RF8398 Description Radio Frequency (UHF) Wireless Headphones System (Power Auto Cut Off/ Dual Color LED Indicator) Transmitter Carrier Frequency 912-913 MHz Effective Range 50 meters Power Supply AC/DC 12V 200mA adaptor Headphones Frequency Responses 20 - 20,000 Hz Signal to Noise Ratio 50dB Distortion <1% Channel Separation 30dB Power Supply 2 x 1.5V AA size normal batteries (Optional) System Included 1 x Transmitter (built-in 3.