ATOMIC Quick Set-Up Guide ADVW791 (NOYRF835 & NOYRF791) 900MHz Digital Headphones is a trademark of SRS Labs, Inc.
Congratulations on the purchase of ADVW791 (RF8338-51) (900MHz) Stereo RF Wireless Headphones to enjoy the revolutionary technology of Phase Lock Loop (PLL) & Sound Retrieval System (SRS)! Please check the supplied component against the following list: 1 x Transmitter 1 x Headphones 1 x Power Supply (AC/DC 12V 200mA Adaptor for Transmitter) 1 x 3.5mm Stereo Audio Cord 1 x 3.
(11) Battery Compartment (12) Battery cover TRANSMITTER: Transmitter Front Side: (13) Charging LED Indicator (14) Power LED Indicator Transmitter Rear Side: (15) Channel CH1/CH2/CH3 Switch (16) Audio IN Socket (17) Charging Socket (18) DC IN Socket ACCESSORIES: (19) (20) (21) (22) 3.5mm Y-connection Cord AC/DC Adaptor 3.
INSTALLATION Please follow this quick set-up guide to ensure trouble free installation of your headphones. Step 1: Connect the 3.5mm Stereo Audio Cord (21) to the audio output socket (i.e. PHONE/ HEADPHONE 3.5mm socket) of your audio source, e.g. TV, HiFi, CD, DVD player etc. *** If your audio source has 2 RCA output sockets (red and white in colour), use the 90mm Y-connection Cord (19) for connection, if necessary. Step 2: Connect the other end of the 3.
SRS SURROUND FUNCTION Switch the Stereo/SRS Switch (9) to SRS position. The SRS LED Indicator (10) glow GREEN showing that the headphone is working in SRS mode. You can enjoy the ground-breaking performance similar to live show. *** When the Stereo/SRS Switch is switched to Stereo position, the SRS LED Indicator will not glow. Only stereo sound will be heard in Stereo mode. is a trademark of SRS Labs, Inc. CHANNEL SELECTION There are 3 channels altogether for this PLL Headphone.
transmitter and the other end to the Charging Socket (8) of headphones. The batteries should be charged for a full 12 hours before use. During charging process, the Charging LED Indicator (13) will glow red showing the headphone is being charged. *** Regular (non-rechargeable type) batteries can also be used to operate this headphone. However, you must never attempt to charge non-rechargeable batteries in this appliance as this could prove dangerous.
(3) Mono Sound: ~ Check if the audio source is mono only, use stereo audio source. (4) Interference: ~ At the rear side of the transmitter, there is a Channel CH1/CH2/CH3 Switch (15), select a different channel and press the Digital tuning button (6) once Then you can listen the good quality sound. . (5) No SRS Surround Sound: ~ Check if the Stereo/SRS Switch is switched to SRS and whether the SRS LED glows GREEN.
SPECIFICATION Model ADVW791 (RF8338-51) (900MHz) Description Radio Frequency (UHF) Wireless Headphones System (Power Auto Cut Off/ Phase Lock Loop/ ALC / Rechargeable function/ SRS Surround Sound ) Transmitter No. of Channels 3 Carrier Frequency Channel 1: 912.40MHz Channel 2: 913.00MHz Channel 3: 913.