Owners Manual

ATOLL ELECTRONIQUE
OWNER’S MANUAL ~ INTEGRATED
IN300
ATOLL ELECTRONIQUEPage 5Page 4
1) Auxiliary input (optional phono or S/PDIF).
2) CD. input.
3) Tuner input.
4) DVD input.
5) Tape input (PLAY).
6) Tape output (REC).
7) BYPASS input.
8) Preamp. outputs (to 1 or 2 power
amplifiers or to a Subwoofer).
9) XLR input – Right channel.
10) XLR input – Left channel.
11) Trigger output
(a)
.
12) Right speaker output (
+
& ).
13) Bluetooth receiver.
14) Coaxial inputs 1 & 2.
15) Optical inputs 1 & 2.
16) USB input (B type): to connect to
a computer with compatible software.
17) Switch ON/OFF and general plug-
in (with protection fuse).
18) Left speaker output (
+
& ).
19) Headphones jack: speakers Outputs are switched off when a headphone is plugged in.
20) ON/OFF knob (by pushing); sources selection (by rotation).
21) Display: shows the selected source (on the left), and volume level (on the right).
22) Knob to put ON, volume and balance setup.
CONNECTING REMOTE CONTROL
DETAIL OF FUNCTIONS
1 2 3 4 5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 2221
The remote control is equipped with 2 Lithium CR2025 batteries. This remote control
is also able to drive all others ATOLL’s products: CD players, Tuners, Integrated or
preamplifiers.
22) Volume setup
+
& (from 0 to 80).
23) DISP: selects ON/OFF of the display.
24) Inputs selection.
25) Direct access to sources.
26) ON/OFF key: on stand-by, the appliance keeps all
parameters unchanged (source, volume level, balance).
27) MUTE key: to exit, press any active key of the remote
control or turn a front knob.
28) Control of the balance: once on the Balance menu,
setup is operated with Vol
+
& keys.
You can set up the balance level from -9 to +9.
29) Selection of the digital inputs.
30) Selection of the BYPASS: to activate/deactivate the
BYPASS, hold 3 seconds.
Warning: reduce the volume of the source connected to BYPASS before any use of the
BYPASS Input. The BYPASS Input offers you the capacity to use your Integrated as a
Power amplifier (plugged to an A/V processor for example). This Input can be selected
from the front panel or with the BYPASS key of the remote control (hold 3 seconds).
Once selected, mention "BYPASS" appears on display. Then, no other functions are
available from the front panel or remote control. The Integrated can be used exactly as a
Power Amp. Press once BYPASS to get back from BYPASS.
USING OF THE BYPASS INPUT
BLUETOOTH®
Your appliance allows the reception of audio signals sent since any device having a
Bluetooth® transmitter (Smartphone, tablet, computer…).
First time association:
• Activate the Bluetooth® connectivity of your emitter device.
• Select the Bluetooth® (BT) input of IN300: unlock symbol
BT
appears.
• Select your appliance on the list of the possible receivers (named IN300).
• Once the connection is made, the lock symbol
BT
appears.
The whole audio signals of your device source will then be transmitted towards your
IN300. Your emitter device will remain associated until you unlock the IN300 with
your Smartphone or switch off your amplifier.
Association of another emitter: Once associated with an emitter, you’ll need to
switch completely your IN300 off in order to make it visible from another emitter.
The quality of reception of the signal depends on the power of the Bluetooth®
emitter and the distance between the 2 devices.
For better reception quality, avoid being more than 5 meters from your device.
(a)
Trigger output: this output is used to control the switching off/on of any device equipped
with a compatible trigger input (see instructions for use).
Trigger cable must be a Male to Male jack plug 3.5mm (1/8”).
23
22 24
27
26
25
30
29
28