Weather Station User’s Manual Weather Station User’s Manual Issue Date: Oct 19,2018 DONGGUAN HO KIU ELECTRONIC PLASTIC PRODUCTS CO.,LTD DONGGUAN HO KIU 1 / 14 Version 1.
Weather Station User’s Manual NOTE: FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
Weather Station User’s Manual 1.Overview Main unit 1 2 10 3 9 4 8 7 5 6 Function: 1. 2. 3. 4. 5. B/L key Air gap Channel key Max/Min key(clear memory) Time (Set) key DONGGUAN HO KIU 6.LCD 7. Lo Alarm (-) key 8. Hi Alarm (+) key 9. History key 10. Air gap 3 / 14 Version 1.
Weather Station User’s Manual 11 16 12 13 15 14 11.Air gap 12.Reset key 13.mb/ inHg option[slide switch] 14.Battery 15.F/C option [slide switch] 16. Air gap DONGGUAN HO KIU 4 / 14 Version 1.
Weather Station User’s Manual Remote unit 1 2 5 3 6 7 8 4 Function: 1. 2. 3. 4. 5. 6. 7. 8. LCD LED indicator Max/ Min Key (Clear Memory) Air gap Battery Reset key Channel Option[slide switch] F/C Option[slide switch] DONGGUAN HO KIU 5 / 14 Version 1.
Weather Station User’s Manual 2,Specification Main unit Scope Temperature Resolution Accuracy -40 ~ +70℃ (-40 ~ +158℉) 0.1℃ (0.2℉) Max±0.5℃ Max(±1.0℉) Humidity 0 ~ 100%RH 0.1%RH Max±3%RH Pressure 400 ~ 1070 mb/ hPa (11.81inHg ~ 31.60inHg) 1 mb/hPa (0.
Weather Station User’s Manual Remote unit Resolution Temperature Humidity Accuracy -40 ~ +70℃ (-40 ~ +158℉) 0.1℃ (0.2℉) Max±0.5℃ Max(±1.0℉) 0 ~ 100%RH 0.1% Max±3%RH Sampling Time 40 sec (Temp & Humidity) RF Center Frequency 433.837MHz MHz (Europe) 418 MHz (USA) RF Modulation Mode ASK RF Transmitting Power 10dBm(TYPE) RF Frequency Offset ±50KHz RF Transmission Range 100m (~30 feet) RF Transmission Interval 40 seconds No.
Weather Station User’s Manual 3,Instruction Power On and Wireless connection 1. Channel choose(Remote unit) At the beginning, use the Channel Option slide switch in the battery box of the Remote unit to set a unique channel number for each Remote unit in a set of RF Weather stations product. 2. Power On and Wireless connection i. On Main unit,Insert batteries, full screen display for a second. - Indoor Pressure (default mb/hPa) - Pressure Trend ii. iii. iv.
Weather Station User’s Manual 4. Reset i. Press ―Reset‖ to reset the unit, all setting will be restored to factory setting. 5. Low Battery Indicator i. ―Low battery indicator‖ appears on the Main unit whenever there is voltage drop of the Main unit or any Remote unit. (The respective ―Low battery indicator‖ appears when the corresponding channel is selected) Pressure 1. Real Time Pressure i. When the unit is on it shows the real time reading of the pressure ii.
Weather Station User’s Manual Temperature and Humidity 1. Channel Selection (Main unit) i. Press ―Channel‖ to select desired reading of both temperature and humidity among the Main unit (indoor), Channel 1,2 and 3. ii. The display shows ―IN‖ or Channel ―1 or 2 or 3‖ and the respectively temperature and humidity reading. iii.
Weather Station User’s Manual --- -40C +70C -40C --- OR ix. --- -40F +158F -40F --Release the button when the desired value is reached. Then press ―SET‖ to confirm and temperature digit stop flashing. While the humidity digit starts flashing. Press ―HI ALARM‖, to increase the humidity digit value as the following: --- 0%RH 99%RH 0%RH --- (--- = alarm off) Press ―SET‖ to confirm and the unit returns to real time mode.
Weather Station User’s Manual Time Press ―Time‖ each to view each of the following Real time clock (HH:MM SS) Real time clock (HH:MM day) Dual time clock (HH:MM 2nd time zone) Calendar (dd/mm day) [bonding option to skip this function is required for LCD showing time and date separately as BR-9204 and BR-9206] Alarm set Real time clock (HH:MM SS) Change GMT setting --:--:GMT difference 1. Time and Calendar Set i. Press ―Time‖ to real time clock. ―TIME‖ sign switches on. ii.
Weather Station User’s Manual ―YEAR‖ sign switches off. Press ―+‖ or ―-‖ to set the date. (*press and hold the button from rapid acceleration of the digit.) xviii. Press ―Time‖ to confirm and the ―M‖ shows and month digit starts blinking. xix. Press ―+‖ or ―-‖ to set the month. (*press and hold the button for rapid acceleration of the digit.) xx. Press ―Time‖ and hold for 3 seconds to confirm and unit return to real time mode. xxi. While the second digit return to 00.
Weather Station User’s Manual acceleration of the digit.) vii. viii. ix. x. xi. xii. xiii. Press ―Time‖ to confirm and the minute digit starts blinking. Press ―+‖ or ―-‖ to adjust. (*press and hold the button for rapid acceleration of the digit.) Press ―Time‖ and hold for 3 seconds to confirm and the unit return to real time clock. When the alarm time is reached the alarm ―bi bi bi, bi bi bi, bi bi bi,… will sound for 1 minute and backlight will turn on for 5 seconds. The ―bell‖ flashes.