WAVE Wireless Presentation Platform AT-WAVE-101 Atlona Manuals Presentation
Version Information Version Release Date Notes 1 Aug 2021 Release 2 Sept 2021 Updated for firmware release 1.0.
Welcome to Atlona! Thank you for purchasing this Atlona product. We hope you enjoy it and will take a extra few moments to register your new purchase. Registration only takes a few minutes and protects this product against theft or loss. In addition, you will receive notifications of product updates and firmware. Atlona product registration is voluntary and failure to register will not affect the product warranty. To register your product, go to https://atlona.
Atlona, Inc. (“Atlona”) Limited Product Warranty Coverage Atlona warrants its products will substantially perform to their published specifications and will be free from defects in materials and workmanship under normal use, conditions and service.
Atlona, Inc. (“Atlona”) Limited Product Warranty Exclusions This Limited Product Warranty excludes: • Damage, deterioration or malfunction caused by any alteration, modification, improper use, neglect, improper packaging or shipping (such claims must be presented to the carrier), lightning, power surges, or other acts of nature.
Important Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCT THE RISK OF ELECTRIC SHOCK DO NOT OPEN ENCLOSURE OR EXPOSE TO RAIN OR MOISTURE. NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the product.
Table of Contents Introduction 8 Features 8 Package Contents 8 Panel Description 9 Installation Mounting Instructions Connection Instructions IP Modes DHCP Static Auto Connection Diagram 10 10 11 11 11 11 11 12 Casting Miracast™ Method 1 Method 2 Google Cast™ Chrome Android AirPlay® OS X Devices iOS Devices 13 13 13 13 14 14 15 17 17 17 Control Unit Websocket WebGUI Display RS-232 TCP Proxy IP 18 18 18 18 18 18 18 18 WebGUI Settings System Network Display Welcome Screen Time Log Instructor 1
Introduction The Atlona AT-WAVE-101 is a wireless presentation and collaboration platform designed for easy content sharing with iOS®, Android™, Mac®, Chromebook™, and Windows® devices. The WAVE-101 allows up to four presenters to share their content simultaneously on-screen, with an Instructor Mode available for managing additional presenters and selecting which to be displayed.
Panel Description USB 3.0 1 USB 2.0 2 6 1 2 Power Button and LED Use this button to power the unit off, it must be held for 4 seconds to turn the unit off. The LED will illuminate green when the unit is on. 3 4 5 7 4. ETHERNET Connect to a network switch for content, control, and/or discovery. 5. 12V DC USB Connect the included 12V DC power supply from this Connect optional USB Wi-Fi adapter (included) here port to a wall outlet. and/or USB to RS-232 adapter (purchased separately). 6.
Installation Mounting Instructions The AT-WAVE-101 comes with a standard VESA mount, for mounting to displays, monitors, etc. 1. Attach the VESA mount to the mounting surface using 4 screws (not included). 2. Turn the WAVE-101 upside down and attach the two included screws to the bottom of the unit. The screws will stick out a small amount.
Installation Connection Instructions 1. *Optional* Connect a network switch to the Ethernet port, for A/V streams, IP control, and system configuration. 2. *Optional* Connect USB Wi-Fi adapter to one of the USB ports for connecting to an existing wireless network (Connect mode) or creating a wireless network (Access Point mode). 3. *Optional* For RS-232 display control, connect a USB to RS-232 adapter to one of the USB ports. 4. Connect an HDMI cable from the HDMI output port to the display. 5.
Installation Connection Diagram Laptop Laptop HD MI Tablet .0 B2 US .
Casting The AT-WAVE-101 has the ability to connect to devices on the network or through a wireless access point. Windows, Chrome OS, Android, iOS, and macOS can all cast through the WAVE-101 to the connected display. Miracast™ Miracast provides a way to wirelessly transmit content from Windows laptops and some android devices to displays. NOTE: Miracast has two casting types, Peer-to-Peer (P2P) and Miracast over Infrastructure (MICE).
Casting Google Cast™ Google Cast provides a way to send content from Google Chrome browsers and/or Android devices to the display wirelessly. Chrome 1. Make sure both the WAVE-101 and the device running the chrome browser are on the same network. 2. Launch Google Chrome. 3. Locate and select the triple dot icon in the upper right corner of the browser. 4. Click the Cast... option from the drop-down menu. A new pop up will appear. 5. Select the WAVE from the Cast tab.
Casting Android Most Android devices have the ability to use Google Cast. The first time for casting will have different steps than future casting. 1. Open Settings on the android device. This can be found either in the App Drawer, on the home screen if the settings app has been added there, or in the top menu that can be accessed by swiping down. 2. Select Connected devices from the menu. 3. Select Connection preference from the new screen. 4. Select Cast from the menu. 5.
Casting 6. Press the Start now button. Once the unit is casting it will show connected on the Cast screen. To disconnect, select wavexxxx from the cast menu, a pop up will appear. Select Disconnect and it will stop casting from the android device. After the first casting, an icon will appear in the top menu for quick and easy casting. 1. Swipe down from the top of the screen on the Android device. Quick settings will open. 2.
Casting AirPlay® OS X Devices AirPlay® is only supported on Mountain Lion 10.8 or later. To determine if AirPlay is supported on the system being used, click System Preferences > Displays. If the “Show mirroring options in the menu bar when available” checkbox is not displayed, then AirPlay is not supported. 1. Make sure both the WAVE-101 and the AirPlay device are on the same network. 2. Select either Mirror or Use as Separate Display (extending) to cast over AirPlay.
Control WAVE-101 has the ability to be controlled and to schedule on/off commands for the display. Unit WAVE-101 can be controlled using the built in webGUI or websocket. Websocket The unit can be controlled using websocket. The commands can be found within the API at https://atlona.com/pdf/ AT-WAVE-101_API.pdf. WebGUI The unit has a built in web UI that will allow for unit configuration. See the WebGUI section, Settings, for more information.
WebGUI NOTE: If the WAVE-101 is connected to the same network via Connect Mode and Ethernet; the WebGUI will not be accessible. The WAVE-101 includes a built-in webGUI, which allows easy remote management and control of all features. Follow the instructions below to access the webGUI. 1. Make sure that an Ethernet cable is connected between the Ethernet port on the AT-WAVE-101 and the network. 2.
webGUI Settings Settings provides a way to set things such as logins, network settings, customized home screens, and more. System System Factory Reset - Select this button, if wanting a clean slate after going through and changing the settings of the WAVE-101. A pop up will appear to verify a reset is what is needed, select FACTORY RESET link to confirm the reset. NOTE: If a PXF file has been uploaded to the WAVE-101, the reset will remove the file.
webGUI Current Version The current version will display to the right of the Current Version label. To verify that the most recent version is being used, check the Firmware tab on the product page located at: https://atlona.com/product/at-wave-101/. If there is a new firmware, download it to the local computer. This file will be a .zip, it will need to be unzipped for updating. Once downloaded and unzipped, press the Update button. A folder will pop up.
webGUI Instructor Page By default, Auto Queuing Mode will be disabled. Auto Queuing Mode Enable - Select the slider to enable and disable the auto queuing mode on the instructor’s page. When enabled, new content will be added to the queue on the side of the instructor page, instead of directly to the HDMI display. BYOD AirPlay and Miracast PIN slider - Select to enable AirPlay and Miracast PIN support.
webGUI Network Hostname Reset - This button will reset the host name back to the default setting which is wave-xxxx (the last 4 of the MAC address of the unit). Hostname - Type in the name that will appear on the network and in casting. Once set, select the disk icon to save the change. Wired Status circle - The circle to the top right will display the status of the Ethernet port.
webGUI Connect Mode When this mode is enabled, select the orange Wi-Fi icon, a pop up will appear that will ask for a network to be chosen. Select the correct Wi-Fi network and then enter the password when prompted. Once saved, the network information will appear below it. By default it will be set to DHCP. Like in the wired section, this can be set to static and the information for the connection set manually.
webGUI Display Display Resolution Connect a display to be able to select the resolution to pass through. The recommended resolution will be selected by default. ... button - Select this button to display a list of compatible resolutions. A star will appear next to the recommended default resolution. Velocity Command Database The WAVE-101 has a built in database with preprogrammed commands for a wide variety of Manufacturers and their products.
webGUI IP Commands IP Address and Port - Type in the IP address and port of the display for commands to be sent to. Time Display Control Enable this section to have the Power On/Off command automatically sent to the display at a certain time of day on different days of the week. NOTE: If content is actively being displayed during the off time, the WAVE-101 will delay the power off sequence until all content has been disconnected from the system.
webGUI Welcome Screen Custom Messaging The options selected here will appear in the bottom left hand corner of the screen with the QR code. Title - Type in the header that will be displayed in bold in the top left of the white box. Message - The information written here will appear below the header in the white box. URL - The URL typed in here will translate into a scannable QR code. The default scan will bring the user to the WAVE-101 landing page.
webGUI Time Timezone Timezone - Set the timezone to the current location of the WAVE-101. Select the ... button and a pop up will appear. A star will display next to the recommended time zone. Recommended time zone is based off the admin browser, not the WAVE-101 location. NTP NTP Hostname - If the unit has internet or internal NTP server access, it can be set to sync to a server as well. Select the slider to enabled it, then enter the server information into the Hostname field.
webGUI Log Log The unit logs will display on this page. Anytime a change is made, the system will record it in the logs. To download the logs, press the cloud button with a down arrow. A folder will open and an area on the local computer will be selectable to save to.
webGUI Instructor The Instructor Page provides a user interface for displaying and controlling content. Layout Style Dynamic - Will adjust the screen automatically for incoming streams and select between the layout style the best suits the content. Static Full Screen - Will display only one stream of content on the display. Dual - Side by Side - Will display two streams of content in a 50/50 side by side split on the display.
webGUI Queue Auto Queue Incoming - Enable this to place things in queue when added. When disabled, anything added or dragged into the media content will automatically display on screen. Kick All - Selecting this button will remove everything from the queue. Hide/Show All - Click Hide All to collapse this field and hide everything in queue. When things are hidden, the button will change to Show All, select it to display all the content currently in queue.
webGUI Status Volume - The volume can be adjust here by either using the audio icons on either side of the bar or dragging the volume dot across the volume bar to the desired level. Mute - Mute and unmute audio using the audio icon on the far right. Content slots - At the bottom right corner, a message will display for how many content streams are available to be added.
Appendix Specifications System Operating System Linux Processor Intel® Celeron N4120 Memory 4 GB LPDDR4 (2400) Storage 64 GB eMMC Cooling Fan w/sink BYOD Interface Wireless LAN (optional-included), Gigabit LAN Casting Protocols Miracast, Google Cast, and AirPlay Wireless Resolution See casting protocol specification Visible wireless streams Up to 4 Video Signal Type Input - Wireless Output - HDMI Copy Protection No Pixel Clock 600 MHz UHD/HD/SD 3840×2160@60/59.9/50/30/29.
Appendix Network Port 1 x RJ45, Wireless Standards and Protocols HTTPS, mDNS, SSL, HTTP/S, WS Speeds 10/100/1000 Mbps Wireless Security WPA / WPA2-PSK Internal wireless protocol 802.11 b/g/n/ac dual band Wireless LAN External wireless protocol 802.
Appendix Dimensions Inches Millimeters HxWxD 1.32 x 2.76 x 2.76 33.4 x 70 x 70 Weight Pounds Kilograms Device 0.57 0.
Toll free US International atlona.com • 877.536.3976 • 41.43.508.
Quick guide Interface Package Contents The box contains the following items. If any of the items is missing or damaged, please contact agency or dealer immediately. Wave 101 Front View Rear View Left View Right View Power Adapter Wave 101 Quick Guide Quick Guide VESA Mount Screws W iF i WiFi Adapter 1 Power Button 6 LAN Port 2 Power Status LED 7 Power adapter port 3 Standard USB 3.0 Port 8 Anti-Theft Key Lock Hole 4 Standard USB 2.
VESA Mount 1. Connect the HDMI port of the mini PC to the HDMI port of a TV or LCD monitor with the HDMI cable. Then set the TV or LCD monitor by selecting the connected HDMI port as "video input signal". 2. Power supply: Insert the power adapter into a standard AC power outlet and connect the power adapter to this device. 3. It supports both USB mouse/keyboard and Bluetooth mouse/keyboard. 4. Plug the RJ45 Ethernet cable to LAN port for WAN connection . 5.
Processor Intel® Celeron N4120 Main Memory 4GB LPDDR4 (2400) Storage 64GB eMMC I/O port 1x HDMI port 1x DC-jack port 1x USB 3.0 Host port 1x USB 2.0 Host port 1x Micro SD Card slot 1x LAN port Buttons & Indicators Power Button Power Status LED Networking 802.11 ac/b/g/n dual band Wireless LAN Power Adapter ASIAN POWER DEVICES INC. WA-24Q12R OS Linux Thermal Design Fan with sink Operation Temp. 0~40Ԩ Dimensions 70mm*70mm*33.
English Declaration of Conformity The English version can be found under the resources tab at: https://atlona.com/product/at-wave-101/ Chinese Declaration of Conformity ᾂ⡒5R+6╝㦑⩅㝣 䚆6.8⍬⍏㜑: https://atlona.com/about-us/china-rohs/. registered trademarks of HDMI licensing Administrator, Inc.
Wireless Presentation Platform Introduction The Atlona AT-WAVE-101 is a wireless presentation and collaboration platform designed for easy content sharing with iOS®, Android™, Mac®, Chromebook™, and Windows® devices. The WAVE-101 allows up to four presenters to share their content simultaneously on-screen, with an Instructor Mode available for managing additional presenters and selecting which to be displayed.
Wireless Presentation Platform Key Features • Wireless AV platform enables simultaneous content sharing for up to four 1080p presenters. • Wireless screen casting with iOS, Android, Mac, Chromebook, and Windows devices through native AirPlay, Google Cast, or Miracast protocols. • Dynamic Layout ModeTM (patent pending) automatically adapts to incoming or disconnected source content, to optimize the way the content is presented on the screen.
Wireless Presentation Platform Specifications System Operating System Linux Processor Intel® Celeron N4120 Memory 4 GB LPDDR4 (2400) Storage 64 GB eMMC Cooling Fan w/sink BYOD Interface Wireless LAN (optional-included), Gigabit LAN Casting Protocols Miracast, Google Cast, and AirPlay Wireless Resolution See casting protocol specification Visible wireless streams Up to 4 Supported Local Media Formats Video .MP4, Quicktime Image .JPEG, .PNG, .
Wireless Presentation Platform USB Port 2 x Type A USB Signal 1 x 2.0 1 x 3.0 Maximum Data Rate 2.0 - 480 Mbps 3.0 - 5 Gbps Network Port Standards and Protocols Speeds Wireless Security Internal wireless protocol External wireless protocol Addressing Wi-Fi 1 x RJ45, Wireless HTTPS, mDNS, SSL, HTTP/S, WS/WSS 10/100/1000 Mbps WPA / WPA2-PSK 802.11 b/g/n/ac dual band Wireless LAN 802.
Wireless Presentation Platform RS-232 Port 1 x USB (adapter sold separately) Default Parameters 9600, 8, N, 1 Use 1-way connected display control and monitoring Baud Rates 2400, 4800, 9600, 19200, 38400, 57600, 115200 Data flow Bidirectional Resolution / Distance 4K/UHD - Feet / Meters 1080p - Feet / Meters HDMI IN/OUT 15 30 5 10 Buttons and Indicators Control Buttons: Power 1 - momentary, tact-type Function Indicators: PWR 1 - LED, green Connectors HDMI OUT 1 - Type A, 19-pin female
Wireless Presentation Platform Accessories SKU Description AT-LC-H2H-1M LinkConnect HDMI to HDMI 1 Meter Cable AT-LC-H2H-2M LinkConnect HDMI to HDMI 2 Meter Cable AT-LC-H2H-3M LinkConnect HDMI to HDMI 3 Meter Cable Footnotes (1) PIN codes are supported for AirPlay and Miracast (Infrastructure and P2P).
Wireless Presentation Platform Copyright, Trademark, and Registration © 2021 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. Pricing, specifications and availability subject to change without notice. Actual products, product images, and online product images may vary from images shown here. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI licensing Administrator, Inc.