User Manual

ManualsBrandsAtlona ManualsAudioAtlona - Rondo 4K HDR Two-Output HDMI Distribution Amplifier - Black

Installation Guide

AT-RON-442 / AT-RON-444

4K HDR Two / Four-Output HDMI Distribution Amplier

AT-RON-442 / AT-RON-444

The Atlona Rondo™ series are HDMI distribution ampliers for high dynamic range (HDR)

formats. They are HDCP 2.2 compliant and support 4K/UHD video @ 60 Hz with 4:4:4 chroma

sampling, as well as HDMI data rates up to 18 Gbps. The Rondo series are ideal for applications

requiring the latest as well as emerging 4K/UHD and HDR sources and displays. They are

compatible with all video resolutions, audio formats, and color space formats supported in the

HDMI 2.0a specication, plus the ability to pass metadata for HDR content. The Rondo Series

HDMI distribution ampliers include EDID management features, front panel LED indicators

for power and signal status, and the capability to cascade several units without compromising

performance.

Package Contents

AT-RON-442

1 x AT-RON-442

1 x 5V DC power supply

1 x Phoenix terminal block, 2-pin

2 x Rack ears

4 x Rubber feet

4 x Screws

1 x Installation guide

AT-RON-444

1 x AT-RON-444

1 x 5V DC power supply

1 x Phoenix terminal block, 2-pin

2 x Mounting plates

1 x Long rack ear

1 x Short rack ear

4 x Rubber feet

4 x Screws

1 x Installation guide

IMPORTANT: Visit http://www.atlona.com/product/AT-RON-442 and http://www.atlona.

com/product/AT-RON-444 for the latest rmware updates.

Summary of content (8 pages)

PAGE 1
Installation Guide AT-RON-442 / AT-RON-444 4K HDR Two / Four-Output HDMI Distribution Amplifier AT-RON-442 / AT-RON-444 The Atlona Rondo™ series are HDMI distribution amplifiers for high dynamic range (HDR) formats. They are HDCP 2.2 compliant and support 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps. The Rondo series are ideal for applications requiring the latest as well as emerging 4K/UHD and HDR sources and displays.
PAGE 2
Installation Guide AT-RON-442 / AT-RON-444 Panel Descriptions AT-RON-442 1 2 3 4 5 6 7 EDID RONDO POWER OUT 1 INT SYNC OUT 2 LEARN TM AT-RON-442 1 + 2 HDMI IN HDMI OUT FW DC 5V 8 9 10 11 1 POWER This LED indicator will glow solid blue when the unit is powered. 7 EDID button Press this button to switch between INT and LEARN modes. 2 SYNC This LED indicator will glow solid blue when an active source is detected on the HDMI IN port.
PAGE 3
Installation Guide AT-RON-442 / AT-RON-444 AT-RON-444 1 2 POWER 3 1 SYNC 2 4 5 6 3 4 INT RONDO TM LEARN EDID AT-RON-444 + HDMI IN 1 2 3 HDMI OUT 7 8 4 FW DC 5V 9 10 1 POWER This LED indicator will glow solid blue when the unit is powered. 6 EDID button Press this button to switch between “internal” and “learn” modes. 2 SYNC This LED indicator will glow solid blue when an active source is detected on the HDMI IN port.
PAGE 4
Installation Guide AT-RON-442 / AT-RON-444 Power Connector Locate the included orange Phoenix terminal block, and wire the included power supply to the block as shown below. Do not use high-torque devices, when securing the wires, as this may damage the screws and/or connector block. White 5V DC power supply Black Installation 1. Connect an HDMI cable from the UHD/HD source to the HDMI IN port on the AT-RON-442/ AT-RON-444. 2.
PAGE 5
Installation Guide AT-RON-442 / AT-RON-444 4. Repeat steps 1 through 3 to attach the second mounting bracket to the opposite side of the unit. 5. Mount the unit using the oval-shaped holes, on each mounting bracket. If using a drywall surface, a #6 drywall screw is recommended. NOTE: Mounting brackets can also be inverted to mount the unit under a table or other flat surface.
PAGE 6
Installation Guide AT-RON-442 / AT-RON-444 3. Turn the attached units over and install the included rack ears to one side of each enclosure using the included screws. RN INT LEA 4 3 D EDI 2 1 C ER SYN POW 44 RN N-4 LEA INT RO AT- O TM ND RO + 4 3 D EDI 2 1 C ER SYN POW 44 N-4 RO AT- O TM ND RO Single-unit rack installation only 1. Attach the small rack ear to one side of the AT-RON-444, using the included screws. 2.
PAGE 7
Installation Guide AT-RON-442 / AT-RON-444 Connection Diagrams AT-RON-442 AT-RON-442 2 N-44 -RO AT + DC 5V 2 FW 1 T MI OU HD MI IN o de Vi HD HD/UHD display Vi de o o de Vi HD/UHD display Laptop AT-RON-444 AT-RON-444 44 N-4 RO Vi de o AT- + DC 5V FW 4 3 T OU de o MI HD Vi 2 1 MI IN HD Vi Vi de o de o Vi de o HD/UHD display HD/UHD display HD/UHD display Laptop HD/UHD display 7
PAGE 8
Installation Guide AT-RON-442 / AT-RON-444 Version 2 Troubleshooting Problem Solution How do I perform a firmware update on the AT-RON-442 / ATRON-444? Firmware and instructions can be found and downloaded under the Firmware tab, at: Does the Rondo series provide external automation control? No. 3D content is not being displayed. • If using INT (internal) EDID mode, all connected displays must be able to display 3D content.