AtlonA HDMI™ v1.3 over Single CAT5E/6 Distribution Series User’s Manual AT-HD50SS AT-HDRS AT-HD50RSL AT-HD15SRS Rev.
TABLE OF CONTENTS 1. Introduction ....................................................................... 1 2. Features ....................................................................... 2 3. Package Contents ....................................................................... 2 4. Specifications ....................................................................... 3 5. Panel Descriptions ....................................................................... 5 5.
INTRODUCTION The Atlona HDMI over Single CAT5 Distribution Series provides the most flexible solution by which the high definition video and high quality audio can be transmitted to different locations over a long distance. The devices are cascadable, allowing you to extend HDMI/DVI compliant displays almost anywhere. Note: The AT-HD50SS is only a sender/transmitter unit and requires a receiver unit to work.
FEATURES Silicon Image Chip-Sets allow 99.99% compatibility with all the AV gear (we only use Best) HDMI 1.
SPECIFICATIONS Model Name AT-HD50SS AT-HD50RSL Sender (TX) Sender / Receiver (TRX) Technical Role of usage HDMI compliance HDMI 1.3c HDCP compliance Yes Video bandwidth Video support Single-link 225MHz (6.75Gbps) 480i / 480p / 720p / 1080i / 1080p60 24/30/36-bit color HDMI transmission (24-bit) Audio support Full HD (1080p) 40m (130ft) [CAT5e] / 50m (165ft) [CAT6] HD (720p/1080i) 50m (165ft) [CAT5e] / 60m (200ft) [CAT6] Surround sound (up to 7.
Model Name AT-HDRS AT-HD15SRS Receiver (long range RX) Receiver (short range RX) Technical Role of usage HDMI compliance HDMI 1.3c HDCP compliance Video bandwidth Yes Single-link 225MHz (6.75Gbps) Video support 480i / 480p / 720p / 1080i / 1080p60 24/30/36-bit color HDMI transmission (24-bit) Full HD (1080p) — 40m (130ft) [CAT5e] / 50m (165ft) [CAT6] HD (720p/1080i) — 50m (165ft) [CAT5e] / 60m (200ft) [CAT6] Audio support Surround sound (up to 7.
PANEL DESCRIPTIONS Sender Unit AT-HD50SS Front Panel 1 Rear Panel 2 3 4 5 6 7 8 1. Power on/off indicator 2. Input video format indicator (ON: HDMI signal / OFF: DVI signal) 3. DIP switch (see the table in the next page) 4. HDMI IN: Connect to a HDMI source with a HDMI male-male cable 5. Audio OUT: Plug in a local speaker 6.
DIP Switch Pin Position Video Audio OFF () Up to 1080p Surround1 Default Mode2 – Up to 1080p & surround sound audio output up to 7.
Sender/Receiver Unit AT-HD50RSL Front Panel 1 Rear Panel 2 3 4 5 6 7 8 1. Power on/off indicator 2. Input video format indicator (ON: HDMI signal / OFF: DVI signal) 3. Signal Level: Adjust the 16-level equalization control corresponding to the transmission distance of receiving HDMI signals. For surround sound audio output, please adjust from 0-to-7 (longest-to-shortest transmission length). For stereo audio output, please adjust from 8-to-F (longest-to-shortest transmission length).
Receiver Unit AT-HDRS Input Panel +5V DC: Connect to 5V DC power supply unit. HDMI Signal IN: Connect to the HDMI Signal OUT on the sender unit AT-HD50SS or AT-HD50RSL with a solid Cat-5/5e/6 UTP/STP cable. Output Panel Signal Level: Adjust the 8-level signal equalization control to the received HDMI signals. The HDMI signal level varies from 0 (strongest) to 7 (weakest) for respective transmission length from longest possible range to short distance.
INSTALLATION AT-HD50SS Extends HDMI signals to next cascading device with one local display 1. Switch off all devices, including monitors. 2. Connect a local HDMI display to the HDMI out of the AT-HD50SS and then connect a speaker to the 3.5mm audio socket. 3. Connect to a HDMI source (such as a Blu-ray Disc player) 4. Connect AT-HD50SS to AT-HD50RSL (for cascading), to AT-HDRS (to HDTV at long range), or AT-HD15SRS (to HDTV at mid range) via HDMI Signal Out RJ-45 port by a Cat-5e/6 cable. 5.
Diagram: 10
NOTICE 1. When adjusting the signal level on the receiver unit, dial the rotary control switch from 7 to 0 and stop turning the rotary switch whenever the audio/video is playing normally. Inappropriate signal level setting may cause overpowering issues that would shorten the product’s life significantly! 2. If the DVI or HDMI device requires the EDID information, please use AT-DVISync EDID Reader/Writer to retrieve and provide EDID information of the DVI or HDMI display or AV receiver. 3.
SAFETY INFORMATION SAFETY INFORMATION Avoid excessive humidity, sudden temperature changes or temperature extremes. Safeguards To reduce the risk of electric shock, do not expose this product to rain or moisture. Keep this product away from wet locations such as bathtubs, sinks, laundries, wet basements and swimming pools. If the wall plug does not fit into your local power socket, hire an electrician to replace your obsolete socket.
WARRANTY WARRANTY 1. LIMITED WARRANTY Atlona Technologies warrants that (a) its products (the ―Product‖) will perform substantially in accordance with the accompanying written materials for a period of 3 years from the date of receipt and (b) that the Product will be free from defects in materials and workmanship under normal use and service for a period of 3 years. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt.
ATLONA PRODUCT REGISTRATION WARRANTY Thank you for purchasing this Atlona product — we hope you’ll enjoy it. We also hope that you’ll take a few moments to register your new purchase. Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firm- ware updates. At Atlona, we respect and protect your privacy and assure you that your registration information is completely secure.