Atlona HDMI with RS232 and with Bi-Directional IR Extenders over CAT5/6/7 AT-HD4-V110SR User Manual Toll free: 1-877-536-3976 Local: 1-408-962-0515 atlona.
Table of Contents 1. Introduction ............................................................................ 3 2. Package Contents ............................................................................ 3 3. Features ............................................................................ 3 4. Specification ............................................................................ 4 5. Panel Description .................................................................
Introduction The Atlona AT-HD4-V110SR is HDMI with RS232 and bi-directional IR Extender Kit over Cat5/6/7, designed on HDBaseT technology which allows full 3D and 4Kx2K (4 times the 1080p) up to 330ft. The HD4-V110SR is capable of transmitting Ethernet channel from one location to another, perfect for digital signage applications.
Specifications Transmitter Inputs Transmitter Outputs Receiver Inputs Receiver Outputs HDCP/EDID Compliant Supports high resolution video HD HDMI (Type A), IR (1/8-inch), RS232 (DB9), Ethernet (RJ45) Link to Receiver (RJ45), Ethernet (RJ45) Link to Transmitter (RJ45), Ethernet (RJ45) HDMI (Type A), IR (1/8-inch), RS232 (DB9), Ethernet (RJ45) Yes 480i, 576i, 480p, 576p, 720p, 1080i, 1080p (24/30/50/60Hz), 2k (2048x1080p), 4kx2k 4096x2160p Supports high resolution video VESA 640x480, 800x600, 1024x768, 1280x
.1.2. Rear Panel 1 2 3 4 1. RS-232 In 2. POWER ON Indicator 3. LINK to a Receiver 4. 5V Locking Power In 5.2. Receiving Module 5.2.1. Front Panel 1 2 3 4 1. HDMI Output 2. Ethernet In/Out 3. IR RX 4. IR TX 5.1.2. Rear Panel 1 2 3 4 1. RS-232 In 2. POWER ON Indicator 3. LINK to a Transmitter 4. 5V Locking Power In Toll free: 1-877-536-3976 Local: 1-408-962-0515 5 atlona.
Connection and Operation 1. Connect the HDMI Source e.g., Cable/satellite Receiver, Blu-Ray Player or a Video Switch to the AT-HD4-V110SR (transmitting unit) 2. Connect the HDMI Display e.g., Projector, LCD/LED or a switch to the AT-HD4-110R (receiving unit) 3. Terminate the CAT5, 6 or 7 wire with 568B termination and use a tester to make sure all pins are wired correctly before connect it to the HD4-V110SR modules. 4.
Troubleshooting 1. No Video Signal on the Display or Signal is going in and Out: a. Please test your RJ45 cables with a Fluke or similar tester to make sure that all the wires are connected and the distance is within the limits. b. If you are using patch panel or and RJ45 wall plates, the distance will be reduced, please do a direct connection bypassing all additional equipment. c. Please try to re-terminate your CAT5/6/7 wire to 568B d.
Safety Information Safeguards To reduce the risk of electric shock, do not expose this product to rain or moisture Do not modify the wall plug. Doing so will void the warranty and safety features. If the wall plug does not fit into your local power socket, hire an electrician to replace your obsolete socket. This equipment should be installed near the socket outlet and the device should be easily accessible in the case it requires disconnection.
Warranty Limited Warranty Atlona Technologies warrants that (a) its products (AT-HD4-V110SR) will perform substantially in accordance with the accompanying written materials for a period of 3 years from the date of receipt and (b) that the product will be free from defects in materials and workmanship under normal use and service for a period of 3 years. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt.
