Atlona HDMI Extender over Single CAT5/6 up to 130 feet with 3D Support AT-HD4-SI40SR User Manual Toll free: 1-877-536-3976 Local: 1-408-962-0515 atlona.
Table of Contents 1. Introduction .................................................. 3 2. Package Contents .................................................. 3 3. Features .................................................. 3 .................................................. 4 5. Panel Descriptions .................................................. 5 5.1. Transmitting Module .................................................. 5 5.1.1. Front Panel ............................................
INTRODUCTION The AT-HD4-SI40SR boosts up your video/audio transmission distance up to 60m (200ft) in HDTV 1080i format, 40m (130ft) in HDTV 1080p format, and 20m (65ft) in HDTV 1080p with 36-bit color depth. AT-HD4-SI40SR also supports the most advanced 3D video format complaint with HDMITM the highest 3D video compatibility on the market. With only one cost effective Cat.
SPECIFICATIONS Technical Transmitter Role of usage HDMI TM Receiver Transmitter [TX] compliance Receiver [RX] High Speed HDMI HDCP compliance Video bandwidth Video support TM - Deep Color & full 3D support Yes Single-link 6.75Gbps [225MHz] 480i/p / 720p (50/60) / 1080i (50/60) / 1080p (24/30/50/60) HDMI over UTP transmission TM Full HD (1080p)-130ft (40m) [CAT5e] / 165ft (50m) [CAT6] HD (720p/1080i)165ft (50m) [CAT5e] / 200ft (60m) [CAT6] Audio support Surround sound (up to 7.
PANEL DESCRIPTIONS 5.1. Transmitting Module 5.1.1. Front Panel 1 2 1. MODE: 0 - EDID Full-HD (up to 1080p@60) -24bit 2D video & 7.1ch audio – long distance 1 - EDID Full-HD (up to 1080p@60) – 24-bit 2D video & 2ch audio – long distamce 2 - EDID Full-HD (1080p@60) - 36bit 2D video & 7.1ch audio 3 - EDID Full-HD (1080p@60) - 36bit 2D video & 2ch audio 4 - EDID Full-HD (1080p@60) - 36bit 3D video & 7.
5.2. Receiving Module 5.2.1. Front Panel 1 2 1. EQ: Adjust the 8-level equalization control to the received HDMITM signals. The HDMITM signal level varies from MAX (strongest) to MIN (weakest) for respective transmission length from longest possible range to short distance. Please adjust the signal level from MIN to MAX and stop turning the rotary switch whenever the audio/video is playing normally. 2. HDMI OUT: Connect to HDMITM display with a HDMITM male-male cable. 5.2.2. Rear Panel 1 2 1.
INSTALLATION 1. Connect a HDMITM or DVI source (such as a Blu-ray Disc player) to the transmitting module of AT-HD4SI40SR. 2. Connect a HDMITM or DVI display (such as a LCD TV) to the receiving module of AT-HD4-SI40SR. 3. Connect a Cat-5/5e/6 cable between the transmitting and receiving modules. 4. Make sure this Cat-5/5e/6 cable is tightly connected and not loose. 5. Plug in 5V DC power supply module to the power jack of the receiving module of AT-HD4-SI40SR. 6.
PIN DEFINITION 8.1. HDMITM Type A (Receptacle) HDMITM Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 TMDS Data2+ TMDS Data2 Shield TMDS Data2TMDS Data1+ TMDS Data1 Shield TMDS Data1TMDS Data0+ Pin 8 Pin 9 Pin 10 Pin 11 Pin 12 Pin 13 Pin 14 TMDS Data0 Shield TMDS Data0TMDS Clock+ TMDS Clock Shield TMDS ClockCEC Reserved (N.C. on device) 8.2.
CONNECTION DIAGRAM AT-HD4-SI40SR HDMI Source Single CAT 5e S AT-HD4-SI40SR AT-H HDMI Cable Single CAT 5e HDMI Display AT-DVI15SRS AT-HD15SRS HDMI Projector/Display DVI Projector/Display PERFORMANCE GUIDE Performance rating Wiring Shielding Solid Unshielded (UTP) Shielded (STP) Stranded Unshielded (UTP) Shielded (STP) Termination Toll free: 1-877-536-3976 Local: 1-408-962-0515 Type of category cable CAT5 CAT5e CAT6 *** **** ***** *** *** **** * ** ** * * ** Please use EIA/TIA-568-B termination (T5
NOTICE 1. When adjusting the signal level on the receiver module, please dial the rotary control switch from MIN to MAX and stop turning the rotary switch whenever the audio/video is playing normally. Inappropriate signal level 2. If the DVI or HDMITM device requires the EDID information, please use EDID Reader/Writer to retrieve and provide DVI or HDMITM display EDID information. 3.
Safety Information Safeguards To reduce the risk of electric shock, do not expose this product to rain or moisture Do not modify the wall plug. Doing so will void the warranty and safety features. local power socket, hire an electrician to replace your obsolete socket. This equipment should be installed near the socket outlet and the device should be easily accessible in the case it requires disconnection.
Warranty Limited Warranty Atlona Technologies warrants that (a) its products (the AT-HD4-SI40SR) will perform substantially in accordance with the accompanying written materials for a period of 3 years from the date of receipt and (b) that the product will be free from defects in materials and workmanship under normal use and service for a period of 3 years. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt.
Atlona Product Registration Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few moments to register your new purchase. Registration creates an ownership record if your product is lost or stolen and helps At Atlona, we respect and protect your privacy, assuring you that your registration information is completely secure. Atlona product registration is completely voluntary and failure to register will not diminish your limited warranty rights.
