Specification Sheet

4K/UHD HDMI Over HDBaseT
TX/RX with PoE
AT-UHD-EX-70-KIT
atlona.com
70 Daggett Road, San Jose, CA 95134
tel: 408-962-0515, toll free: 1-877-536-3976, fax: 408-743-5622
©Atlona 2003-2015
The Atlona AT-UHD-EX-70-KIT is an HDBaseT™ transmitter/receiver kit for HDMI transmission up to 230
feet (70 meters) over category cable with Power over Ethernet capability. The kit transmits video signals up
to 4K/UHD @ 60Hz with embedded multi-channel audio and remote 48V power for the receiver. The kit is
HDCP 2.2 compliant and supports EDID communication. Both transmitter and receiver feature quarter rack
width metal enclosures for easy rack mounting with rear panel I/O ports for uncluttered wire management.
The AT-UHD-EX-70-KIT provides integrator-friendly features including: IEEE standards-based PoE
transmission for safety and compatibility; HDCP 2.2 compliant for meeting the latest copy protection
requirements; rack-mountable form factor for accommodating four transmitters in a single 1U rack tray;
power chaining for powering multiple devices from one power supply; and front mounted USB port for
easy firmware updates.
The AT-UHD-EX-70-KIT is ideal for use in residential or commercial point to point applications that require
HDBaseT signal transmission over greater distances than HDMI can support. As a transmitter/receiver pair,
the kit can be used with the H2H matrix switcher series or HDDA distribution amplifier series for long
distance AV signal extension with PoE capability without control signal extension requirements.
4K/UHD capability -
• Compatible with Ultra High Definition sources and
displays
• Future proofs AV systems in preparation for
technology improvements, 4K/UHD streaming
services and playback devices
HDCP 2.2 compliant -
• Adheres to latest specification for High-bandwidth
Content Protection
• Allows protected content stream to pass between
devices
Remote-powered receiver -
• Industry standard IEEE 802.3af PoE for receiver is
supplied by transmitter over HDBaseT
• Saves time and integration costs
Long distance HDMI extension -
• Transmits HDMI signals up to 230 ft (70m) @ 1080P
and 130 ft (40m) @ 4K/UHD using CAT6a/7 cable
• Uses easy-to-integrate category cable for low-cost,
reliable system installation
Rear panel I/O connectors -
• Placement of ports on rear panel simplifies wire
management
• Saves installation time and eliminates clutter
Low-profile, 1 inch (2.5 cm) high quarter rack-width
enclosure -
• Easy installation into racks and confined spaces
behind displays
• Keeps devices out-of-sight when placed in public
spaces

Summary of content (2 pages)