Information Sheet

Wide Frequency & Consistent Beamwidth Control
Model APX40TN a conservatively rated 40 watt, constant-direc-
tivity paging loudspeakers for use in public address or pag-
ing applications. 40 watt model has a 40 watt tap at 70V.
Environment-resistant units feature a 60° x 40° (±10˚)
constant-dispersion pattern across the controlled frequency
band of 1.25-10 kHz. The rotating bell pivots in precise 15°
increments for exact on-site positioning of projection angles.
A triple lock security mounting method saves installation time
and provides long-term stability. APX models are equipped with
an internal 25/70.7/100 volt transformer with screw termi-
nal connections made beneath the rear cap. Rear cap
will facilitate armored cable. Power stripe code around
the driver assembly provides identification of power rating
from a distance. Loudspeaker mounts to die-cast zinc base.
Pre-mount the base to a standard 1-gang, 2-gang, or 4” sq.
E.O. box. If replacing AP Series speakers, simply remove the APX base and
mount to the Omni-Purpose® bracket. Finish is neutral.
APX40TN
Constant-Directivity Paging Loudspeakers
8k
4k
2k
1k
8k
4k
2k
1k
50
°
/
8k
60°/
4k
60°/
2k
80°/
1k
25°/
8k
45°/
4k
75°/
2k
125°/
1k
* Typical exponential coverage illustrated
8k
4k
2k
1k
8k
4k
2k
1k
50
°
/
8k
60°/
4k
60°/
2k
80°/
1k
25°/
8k
45°/
4k
75°/
2k
125°/
1k
* Typical exponential coverage illustrated
APX Beamwidth
Controlled Coverage
Across a Wide Freq. Range
Conventional Beamwidth
Collapsing Coverage
Across a Wide Freq. Range
“X”-tra Value Features
• Rotating Bell
•
Triple Lock Security
• “Power Stripe” Code
•
Quality Materials
“X”-tra Easy Installation
• Universal base mounts 1-gang, 2-gang or 4" sq. E.O. boxes.
• 40 watt model includes 30 watt tap @ 70V.
“X”-tra Predictability
• Clear Messaging and Music
•
Consistent Beamwidth Control
• Fewer Speakers to Provide Quality Communications
Features
• Controlled Coverage of 60˚ x 40˚ Across a Wide
Frequency Range for Predictable Beamwidth Control
• 40 Watt Models For Better Output Over Competitive
15 & 30-Watt Standards
• Triple Lock Horn-to-Base Mounting Method Speeds
Installation and Insures Long-Term Stability
• Rotating Bell Pivots in 15˚ Increments for Exact
On-Site Positioning of Projection Angles Detailed in
Acoustic Simulation Programs
• Rear Cap Includes Partially-Captive Screws (No
Loose Parts) for Swing-Open Access to Power
Taps and Wire Connections. Cap Includes
Knockout for Conduit Connection
•
Sturdy Die-Cast Base Includes Provisions for Flex
Conduit and May Be
Mounted to 1-gang, 2-gang,
and 4" Square E.O. Boxes, Banded to
Poles or
Removed for Easy Retrofit of Existing AP Series
Loudspeakers
• Loudspeaker is Molded of High-Impact, Neutral-
Grey Polycarbonate
Resin with UV Light Inhibitor
Preventing Embrittlement or Discoloration
• Universal 25/70/100V Transformer Includes a
Rotary-Dial Selector for Easy Tap Identification
• Speaker Mounting is Backwards Compatible to AP
Series–Simply Remove Base and Mount to Omni-
Purpose
®
Bracket
APX40TN
AtlasSound.com 800.876.3333
ISO900
1
-CERTIFIED-