Warranty

ManualsBrandsAtlas ManualsBuilding materialsCastlebrook™ Limited Lifetime Warranty Architectural Shingles (32.8 sq ft)

Product

Limited Warranty

Period

Atlas Premium Protection

Non-Prorated Period

Prorated Reduction

Figure

Wind Speed Limits

Wind Warranty

Length

Algae Resistance

StormMaster

Slate featuring

Scotchgard

™

Protector

Lifetime 10 Years 1/600* 130 mph w/ 4 nails 15 Years Scotchgard

™

Protector Lifetime

StormMaster

Shake featuring

Scotchgard

™

Protector

Lifetime 10 Years 1/600*

150 mph w/ 6 nails

130 mph w/ 4 nails

15 Years Scotchgard

™

Protector Lifetime

Pinnacle

Pristine featuring

Scotchgard

™

Protector

Lifetime 10 Years 1/600* 130 mph w/ 4 nails 15 Years Scotchgard

™

Protector Lifetime

Briarwood Pro

™

Lifetime 10 Years 1/600* 130 mph w/ 4 nails 15 Years ARS 10 Years

Castlebrook

Lifetime 10 Years 1/600*

130 mph w/ 6 nails

110 mph w/ 4 nails

15 Years Non ARS Non ARS

* The StormMaster

Slate, StormMaster

Shake, Pinnacle® Pristine, Briarwood Pro

™

and Castlebrook

Lifetime Warranty proration after the 45th year or 540th month of installation will

have a 10% proration factor for the lifetime of the original owner.

In order to qualify for the Atlas Lifetime Algae Resistance Limited Warranty against black streaks caused by blue-green algae, installation must include Atlas Pro-Cut

Hip & Ridge shingles featuring Scotchgard

™

Protector or

Atlas Pro-Cut

High Proﬁle Hip & Ridge shingles featuring Scotchgard

™

Protector with Atlas shingles featuring Scotchgard

™

Protector.

Castlebrook

Wind Warranty: Standard 4-nail application is 110 mph wind warranty. Enhanced wind warranty to 130 mph with 6-nail application and the use of Atlas Pro-Cut

Starter Shingles installed along the eaves.

Refer to the Atlas Rooﬁng Limited Shingle Warranty for all coverage requirements.

StormMaster

Shake Wind Warranty: Standard 4-nail application is 130 mph wind warranty. Enhanced wind warranty to 150 mph with 6-nail application and the use of Atlas Pro-Cut

Starter Shingles installed on all the

eaves & rakes and Atlas Pro-Cut

Hip & Ridge or Atlas Pro-Cut

High Proﬁle Hip & Ridge. Refer to the Atlas Rooﬁng Limited Shingle Warranty for all coverage requirements.

ATLAS ROOFING CORPORATION (“ATLAS”) warrants to you, the original owner of its shingle

products, that this product is free from any manufacturing defects that materially aect the

performance of your shingle during the Premium Protection Period or that cause leaks for the balance

of the applicable warranty period. This warranty is eective on all product types stated herein and

installed in the United States and Canada on or after 1/1/2019.

LIMITED WARRANTY PERIOD

Your ATLAS shingles qualify for a limited warranty (as listed in the chart below) when properly installed

in accordance with the product’s application instructions (as provided on the product packaging).

PREMIUM PROTECTION PERIOD

Premium Protection Period refers to the initial full labor & material coverage during the critical rst

years of your roof’s life (see chart for product specic premium protection periods). The limited

warranty is the sole and exclusive remedy, and during the warranty period specied in the chart below,

the maximum repair or replacement cost to ATLAS shall not exceed during the Premium Protection

years, the replacement cost to the owner for the product plus replacement labor cost for the defective

shingles. (This limited warranty does not include costs for tear-o and dump fees after the fth year

from the original installation date. This limited warranty does not include costs for roof deck repairs,

ashing, metal work or related work.)

PRORATED LIMITED WARRANTY PERIOD

During the remaining warranty period (after the Premium Protection Period), ATLAS will adjust

valid claims (product materially aected by a manufacturing defect), by an amount determined by

decreasing monthly the replacement cost of the product in proportion to the unexpired warranty

period. To reect the percent of use you have received from your shingles, the warranty calculation

will be made by dividing the number of months that have elapsed since installation by the number of

months in the warranty period. If applicable, the StormMaster

Slate, StormMaster

Shake, Pinnacle

Pristine, Briarwood Pro

™

and Castlebrook

Lifetime Limited Warranty proration after the 45th year

or 540th month of installation will have a 10% proration factor for the lifetime of the original owner

(see LIMITATIONS AND RESTRICTIONS FOR THE LIFETIME LIMITED WARRANTY). In no event shall

ATLAS’ liability extend to any cost for the tear-o of the product or for the replacement installation cost

of the new product during the prorated period.

LIMITATIONS AND RESTRICTIONS FOR THE LIFETIME LIMITED WARRANTY

ATLAS will provide the homeowner who initially purchases StormMaster

Slate, StormMaster

Shake,

Pinnacle

Pristine, Briarwood Pro

™

or Castlebrook

with a warranty that last the lifetime (lifetime

meaning the lifetime of the original property owner, not the roof, or the second owner, if coverage was

properly transferred during the rst ve years) of the homeowner’s possession, provided that proper

product installation in accordance with the instructions (as provided on the product packaging) is

followed.

The lifetime coverage oered by this warranty automatically ceases/ends upon the sale of the property,

or the death of the last of the homeowners who owned the home at the time of the application, unless it

is transferred as described below under Transferability.

The lifetime limited warranty option is only available for individual single-family site-built detached

residences. A 50-year limited warranty would apply to all property owned by government agencies,

corporations, limited liability companies, partnerships, trust, religious organizations, schools or school

districts, condominiums or cooperative housing arrangements, or installed on apartment buildings

or any type of building or premises not used by individual homeowners for a single-family site-built

detached residence.

LIMITATIONS OF REMEDIES AND LIABILITY

This limited warranty is the sole and exclusive remedy provided by ATLAS for shingles containing

manufacturing defects. For those shingles containing manufacturing defects, your maximum remedy is

outlined herein under the sections entitled Premium Protection Period and Prorated Limited Warranty

Period. The decision on which of the stated remedies is provided to an original owner or authorized

transferee in each individual case shall be at the sole discretion of ATLAS. If proration applies as stated

above, ATLAS will calculate the appropriate percentage as stated herein under (Prorated Limited

Warranty Period). If providing replacement shingles, ATLAS, wherever possible, shall replace shingles

with shingles of the same color and design; however, since color variances exist between shingles

manufactured at dierent times and since ATLAS may discontinue or modify its shingles, ATLAS

reserves the right to replace defective shingles with shingles of similar color and design.

IN NO INSTANCE IS ATLAS RESPONSIBLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL

DAMAGES. THE DURATION OF ANY IMPLIED WARRANTY IS HEREIN LIMITED IN DURATION TO

THAT OF THE EXPRESS WARRANTY STATED HEREIN.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the

limitations or exclusions may not apply to you.

SOLE WARRANTY

THE LIMITED WARRANTIES SET FORTH HEREIN ARE EXCLUSIVE, AND LIMITS AS TO DURATION

ALL OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED BY LAW INCLUDING THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE TO THE TIME

PERIODS STATED ABOVE. ATLAS MAKES NO REPRESENTATION OR WARRANTY OF ANY KIND,

OTHER THAN THE LIMITED WARRANTY SET FORTH HEREIN. THIS LIMITED WARRANTY CONTAINS

ALL OF THE PROVISIONS OF YOUR REMEDIES FROM ATLAS. ATLAS’ LIABILITY IS LIMITED TO THE

PROVISIONS OF THIS LIMITED WARRANTY, WHETHER ANY CLAIM AGAINST IT IS BASED UPON

STRICT LIABILITY, NEGLIGENCE, BREACH OF WARRANTY OR ANY OTHER THEORY OR CAUSE OF

ACTION. NO PERSON IS AUTHORIZED TO ALTER THIS LIMITED WARRANTY EITHER ORALLY OR IN

WRITING. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY

LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

WIND LIMITED WARRANTY

(Covers shingles only) ATLAS warrants that its shingles will resist damage by wind gusts up to a

maximum wind speed as indicated in the Warranty Details chart, provided that the shingles have been

installed in accordance with the printed application instructions on the shingle bundle wrapper, and

have had the opportunity to seal down.

If during the Wind Limited Warranty period, indicated in the Warranty Details Chart, damage occurs

to the shingles as a result of wind gusts under the specied Wind Speed Limits, ATLAS will furnish at

no charge, replacement shingles for the damaged shingles only, but not for replacement labor. The

coverage against wind gusts as described above is 15 years for StormMaster

Slate, StormMaster

Shake, Pinnacle

Pristine, Briarwood Pro

™

and Castlebrook

shingles from the date of installation.

High Wind Speed Provision: Atlas oers the property owner a 130 mph high wind speed provision for

StormMaster

Slate, StormMaster

Shake, Pinnacle

Pristine, Briarwood Pro

™

and Castlebrook

®2

shingles that have the “Built with HP Technology” designation on the product packaging (produced

in Ardmore, Daingereld, Franklin, Hampton, and Meridian) when following the Atlas standard 4-nail

application or 6 nails for steep slope and Mansard application as seen on the product packaging.

Atlas oers the property owner a 150 mph high wind speed provision for StormMaster

Shake

shingles that have the “Built with HP Technology” designation on the product packaging when

following the Atlas 6 nail application (as seen on the product packaging) and the required use of

Atlas Pro-Cut

Starter shingles used on all the eaves and rakes and Atlas Pro-Cut

Hip & Ridge/

Atlas Pro-Cut

High Prole Hip & Ridge. The 150 mph high wind speed revision does not apply to

shingles installed in the fall or winter and not exposed to adequate temperatures to activate sealant

line as described below (including hand sealing) in the SEALANT FAILURE section below or with

shingles applied over existing shingles.

All Atlas Shingle Products Tested To:

ASTM D7158, Class H Wind Resistance, Passed to 150 mph

ASTM D6381, Uplift Resistance

ASTM D3161, Class F Wind Resistance, Tested at 110 mph

LIMITED SHINGLE WARRANTY

ATLAS ROOFING

LIMITED SHINGLE WARRANTY

Summary of content (2 pages)

PAGE 1
ATLAS ROOFING LIMITED SHINGLE WARRANTY LIMITED SHINGLE WARRANTY ATLAS ROOFING CORPORATION (“ATLAS”) warrants to you, the original owner of its shingle products, that this product is free from any manufacturing defects that materially affect the performance of your shingle during the Premium Protection Period or that cause leaks for the balance of the applicable warranty period. This warranty is effective on all product types stated herein and installed in the United States and Canada on or after 1/1/2019.
PAGE 2
SEALANT FEATURE In order to activate the sealant feature, the shingles must be exposed to direct sunlight for a continued period of time for the shingles to seal. Shingles installed in fall or winter and not exposed to adequate surface temperatures, or other conditions, which temporarily or permanently preclude activation of the sealant, may never seal and must be hand sealed at the time of installation.