Brochure

PD-60A / PD-60AT
FEATURES
• Outstanding sound reproduction and power-handling for signaling, music and public
address systems
• Extended frequency response range for Optimum intelligibility
• 60 watt power rating
• Environment-resistant construction for indoor/outdoor use
• Offered with or without transformer
APPLICATIONS
Atlas Sound Models PD-60A and PD-60AT are versatile, 60 watt, high power, compression
drivers designed for use in conjunction with Atlas Sound large format horns (Models CJ-46,
BIA-100, DR Series) or other similar equipment. Drivers provide maximum efficiency and
extended heavy-duty performance. Combined with Atlas Sound horns, PD-60A Series Models
offer quality and durability to assure optimum penetration and excellent intelligibility in profes-
sional and commercial audio systems where sound projection and frequency response are
demanded. PD-60A Series drivers will provide powerful audio or signal reproduction with supe-
rior wide-range fidelity.
Units are ideal for commercial sound, signaling and public- address systems in applications
such as manufacturing, recreation and sports facilities, exhibit halls, commercial centers, ship-
ping and transportation terminals, malls, storage areas and warehouses, etc.
GENERAL DESCRIPTION
Models PD-60A and PD-60AT are fully environment-resistant 60 watt drivers for indoor or out-
door application and are recommended for use in expansive and/or high ambient sound-level
areas. Models feature sound chamber, phasing plug, magnetic-structure components
machined to optimum tolerances, 2" voice coil and offer a plane wave frequency response of
100 - 3,700 Hz (+5dB).
This series, which is comprised of a 16-ohm (PD-60A) and transformer (PD-60AT) versions,
will meet a variety of applications. Model PD-60A provides screw-type terminals for matching
direct to the 16 ohm voice coil impedance. The PD-60AT features a built-in varnish impregnat-
ed, multi-tap 70 volt line-matching transformer. Corrosion-resistant terminal connections are
protected by a transparent, impact-resistant plastic cover which provides strain relief for the
interconnecting cable.
Models PD-60A and PD-60AT are terminated in standard 1.375"–18" thread male couplings for
use with screw-on horns, or with Atlas Sound Model DA-FH and YDA-TH adapters for bolt-on
large format horns. Diaphragms are replaceable with appropriate equipment.
Internal components are enclosed within protective die-cast housing and finished in grey
baked epoxy.
Specifications subject to change without notice
159
TWO
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: [phone] / FAX [phone]
AtlasSound.com
HIGH EFFICIENCY 60-WATT COMPRESSION DRIVERS
PD-60A
PD-60AT
SPECIFICATIONS
POWER PLANE WAVE LOW FREQ. LIMIT SOUND IMPEDANCE POWER VOICE
MODEL RATING FREQ. RESPONSE @ FULL POWER LEVEL* TAPS COIL DIMENSIONS WEIGHT
PD-60A 16 (Nom.) — 6
7
⁄8" H x 6.2 lbs.
PD-60AT 60W 100 - 3,700 Hz 300 Hz 112.7 (avg) 2K, 1K, 500, 70.7V 2" 6
3
⁄8" W (2.8Kgs.)
(+
5dB) 100 - 3,700 Hz 250, 125, @ (5cm) (17.5cm x 8 lbs.
(+5dB) 85, 16 2.5, 5, 10, 16.2cm) (3.6Kgs)
20, 40, 60
*Measured on a plane wave tube at 1 mW (See SL2-1411, SL2-1414, or SL2-1418 for sound pressure levels on projector horns being used with these drivers)
© 2004 Atlas Sound Printed in U.S.A. 001003 ATS001637 RevB 10/03 SL2-1561