MWRCVR Wireless Receiver Owner’s Manual MWRCVR UHF 2-Way Sync Wireless Receiver 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.3435 –1– Specifications are subject to change without notice. AtlasIED.
MWRCVR Wireless Receiver Owner’s Manual Description The AtlasIED MWRCVR wireless receiver is the ideal choice for a variety of applications ranging from classrooms and conference rooms to lecture halls and live presentations. Designed to work in conjunction with either the MWHHM wireless handheld microphone or the MWBTP wireless belt pack microphone, the MWRCVR allows for great flexibility in sound reinforcement applications.
MWRCVR Wireless Receiver Owner’s Manual Parts and Functions Sync Sync A A Power Power 1 B B Diversity Diversity Audio Audio 3 4 2 Set Set MWRCVR Wireless Wireless Microphone Microphone UHF UHF 2-Way 2-Way Sync. Sync. Receiver Receiver MWRCVR 5 6 7 9 8 1601 1601 Jack Jack McKay McKay Blvd. Blvd. •• Ennis, Ennis, TX TX 75119 75119 800.876.3333 800.876.3333 •• AtlasIED.com AtlasIED.
MWRCVR Wireless Receiver Owner’s Manual Changing Channel / Frequency 1. Press and release SET button until the CHANNEL | FREQUENCY page appears (Fig 1). 2. Press UP or DOWN button to select a new channel. As the channel changes, the frequency changes accordingly (Fig 2). 3. After a channel is chosen, wait 5 seconds to store the setting. Figure 1 Figure 2 Synchronizing Channels on the Receiver and Transmitter Align infrared areas of the receiver and microphone within 12" (30cm). < 12" Figure 3 A.
MWRCVR Wireless Receiver Owner’s Manual B. Changing the microphone’s channel 1. Press the synchronizing button on the receiver (Fig 7). 2. “IRDA DATA SEND” will appear on the receiver’s display (Fig 8). 3. “IRDA TX FINISH” will appear to denote data transferred (Fig 9). Figure 8 Figure 9 Figure 7 If this does not synchronize the channels, ensure the IR sensor panels are properly aligned and are located within 12" (30cm) of each other and try synchronizing again.
MWRCVR Wireless Receiver Owner’s Manual Adjusting Volume Level 1. Volume adjustment can be made from the home screen (Fig 12). 2. Press UP or DOWN button to choose a new level (Fig 13). 3. After the level is adjusted, wait 5 seconds to store the setting. Figure 12 Figure 13 Adjusting Squelch Level When interference is encountered try reducing the sensitivity of the receiver, thus less susceptible to interference. 1. Press and release SET button until the SQUELCH SETUP page appears (Fig 14). 2.
MWRCVR Wireless Receiver Owner’s Manual Audio Output Connection Balanced Output: XLR connector provides balanced audio output signal from this jack to the mixer/amplifier. Use an audio output cable with “XLR” or “Cannon” connector, connect one end to the balanced output jack of the receiver, and the other end to the “LINE IN” or “MIC IN” jack of the mixer/amplifier. Figure 16 Figure 17 Level Switch Setting: When connecting to the LINE/AUX IN of a mixer/amplifier, switch to “LINE” position (Fig 16).
MWRCVR Wireless Receiver Owner’s Manual Audio Output Connection Unbalanced Output: 1⁄4" line output connector provides unbalanced audio output signal from this jack to the mixer/amplifier. Use an audio output cable with 1⁄4" PHONE PLUG connector. Connect one end from the unbalanced output jack of the receiver, and the other end to the “LINE IN” or “MIC IN” jack of the mixer/amplifier.
MWRCVR Wireless Receiver Owner’s Manual Receiver Installation 1. For best operation, the receiver should be at least 1m above the ground and 1m away from a wall or metal surface to minimize reflections. 2. The transmitter should also be at least 1m away from a wall or metal surface to minimize reflections. The microphone should also be at least 1m away from the receiver. 3. Keep antennas away from noise source such as motors, automobiles, neon light as well as large metal objects.
MWRCVR Wireless Receiver Owner’s Manual System Frequency Range UHF 566 - 585.8MHz Switching Bandwidth 25MHz Switchable Frequencies 100 Channels 1 Display Screen LCD Operating Range 100m Direct Sight Output Impedance Mic / Line Oscillation Type PLL Synthesized Frequency Stability ±0.005% Receiving Method True Diversity Sensitivity -95dBm Synchronization 2-Way Image Rejection > 85dB S/N Ratio > 110dB Peak (Maximum) Deviation ±40KHz T.H.D. < 0.
MWRCVR Wireless Receiver Owner’s Manual Notes 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.3435 – 11 – Specifications are subject to change without notice. AtlasIED.
MWRCVR Wireless Receiver Owner’s Manual Limited Warranty All products manufactured by AtlasIED are warranted to the original dealer/installer, industrial or commercial purchaser to be free from defects in material and workmanship and to be in compliance with our published specifications, if any.
