Brochure

MITEK CORP. © 2014
(preliminary)
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: [phone]
FAX [phone]
AtlasSound.com
1/3
©2014 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS004922 RevA 6/14
AA200PHD
200W Mixer Amplifier
AA200PHD
Features
• 200W Into 25V/70.7V and 4Ω Loads
• Automated Diagnostic System Test (Push Here Diagnostic)
• Four Balanced Mic/Line/Tel Inputs w/ Phantom Power
• Three Unbalanced, Summing Line Level Inputs
• Input Assignable Zone 2 Output
• Remote Level Control
• Remote Input Select (RIS)
• Line Output
• Preamp In for External Processors
• Variable Mute Sensitivity Control for Input 1
• Contact Closure Mute Terminals
Application
The Atlas Sound AA200PHD is the perfect choice for distributed
business paging and background music (BGM) systems, small to
medium speech privacy systems, and in applications where music on
hold (MOH) plus paging is required.
General Description
The AA200PHD is a six input channel mixer amplifier designed for
distributed business paging and background music (BGM) systems,
medium to large speech privacy systems, and in applications where
music on hold (MOH) plus paging is required.
With one microphone/line input and two stereo line inputs, the
AA200PHD will accommodate a variety of input sources including paging
microphones, media players, and digital music receivers. The AA200PHD
includes a patent pending automatic system test, the Push Here
Diagnostic (PHD). The PHD button is designed to check the connected
speaker lines for wiring and impedance errors. This test can be activated
once all speakers are connected and the circuit automatically verifies
that the attached speakers' tap settings do not exceed the amplifier's
rated power, no speakers are mistakenly tapped at 8Ω, and the speaker
wire is free from shorts. The unit also incorporates a Remote Input
Selection and Remote Level Control feature that allows the integrator to
use a remote wall plate (Atlas Sound model WPD-RISRL) and allow the
user to select the input and adjust the volume from that wall plate up to
200 feet from the amplifier.
The AA200PHD provides 200-watts output power into 25V, 70.7V, or
4Ω speaker systems. Rear panel DIP switch allows for creation of Zone
2 output mix using any or all of inputs 1-4. Unit can also be set-up to
mute Inputs 2 through 6 on signal from Input 1 for paging applications
where other input sources need to be muted during a page. Inputs 1-4
are either Mic or Line input selectable and Phantom Power is an option
when using them as a microphone input.