6" LED FLOODLIGHT INSTRUCTION MANUAL
Model: FLDX84LED 84 Watt LED FloodLight INSTALLATION INSTRUCTIONS IMPORTANT: READ BEFORE REMOVING FIXTURE FROM CARTON. RETAIN FOR FUTURE REFERENCE. SAFETY: This fixture must be wired in accordance with the NATIONAL ELECTRICAL CODE and applicable local codes and ordinances. A person familiar with the construction and operation of the product and the hazards involved must install this product. A qualified licensed electrician should complete all work. Proper grounding is required for safety.
Model: FLDX84LED 84 Watt LED FloodLight WIRING Note: LED fixtures utilizes a mult-volt (120-277V) that is auto sensing, no rewiring is necessary. Note: Do not open fixture or remove heat sink, doing so will void warranty. Use Supply wire (3' SJO cord supplied) rated for 90°C. 1. Turn off electrical supply at the breaker. 2. Follow all local electrical codes for wiring and grounding requirements. 3. Check to make sure that the supply voltage to the fixture is compatible with the fixture. (120-277v) 4.
Atlas Lighting Products, Incorporated (“Atlas”) is pleased to provide the following limited warranty for items purchased from Atlas. Atlas warrants that this product is free from defects in materials and workmanship for up to 5 years from date of shipment. This warranty is not applicable to, and Atlas makes no warranty whatsoever with respect to, any fixture not installed and operated in accordance with the National Electric Code (NEC), the Standards for Safety of Underwriters Laboratories, Inc.
