Item #: 86915001 January 25, 2020_R1
Assembly Tips: Become familiar with the instructions and all parts. Make sure that all parts are in the box and in good condition. Assemble the product on the open flat carton or a rug to protect the product and your floor. Some heavy products need a second person to assist in the assembly. Use of power tools is not recommended. With each step, first insert and hand-tighten all bolts and screws by hand. After ALL BOLTS are slightly screwed in, fully tighten bolts with Allen wrench in sequential pattern.
STEP 1 A (4 pcs) STEP 2 A (8 pcs) C Attach middle support panel (#1) to side panels (#2) with bolts (A) using Allen wrench (C). C Attach side panels (#3) to base panel (#4) and then base panel (#5) with bolts (A) using Allen wrench (C). Then attach side panels (#3) to cable management bracket (#6) with bolts (A) using Allen wrench (C). Fije el panel de soporte central (#1) a los paneles laterales (#2) con pernos (A) usando la llave Allen (C).
STEP 5 B (2 pcs) Apply fabric fastener strip (B) to back of a power strip and peel back film. Insert power strip cord through cable management slots. Then apply power strip to middle panel on SOCKETMAN™ frame. Optionally attach a second power strip to the opposite side of middle panel. Aplique la tira de sujeción de tela (B) en la parte posterior de una barra de contactos y pele la película. Inserte el cable de alimentación a través de las ranuras de administración de cables.