Installation Manual

ManualsBrandsAtlantic ManualsElectronicsTilting TV Wall Mount - Tiling Mount for Flat Screen TVs from 37-84 inches with 6 Foot High-Speed HDMI Cable, Cable Ties and Leveler PN63607152

Item No: 63607152

THIS INSTRUCTION BOOKLET CONTAINS

IMPORTANT SAFETY INFORMATION. PLEASE

READ AND KEEP FOR FUTURE REFERENCE.

Lot Number:

Date:

MIN :

3.94in

00MM

MAX:23.6

2in

/600MM

: NIM

ni49.3

MM00

MAX:

ni57.51

MM00

+8°

0°

Congratulations on your Catalyst purchase. Follow these simple instructions and you’ll

have your TV mounted in no time.

This kit fits most TVs 37in. - 84in. (94cm - 213cm), up to 132lbs (60kgs).

Keep this Instruction Manual for future reference.

Keep your original proof of purchase (store receipt).

If you have any questions and/or wish to order parts, please call us toll free at 800-747-2660.

Tilt

Summary of content (7 pages)

PAGE 1
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Lot Number: Date: Item No: 63607152 0° MIN :3.94in/100MM MAX:15.75in/400MM MM 100 MM / n i 4 0 :3.9 n/60 MIN :23.62i MAX Tilt +8° Congratulations on your Catalyst purchase. Follow these simple instructions and you’ll have your TV mounted in no time. This kit fits most TVs 37in. - 84in. (94cm - 213cm), up to 132lbs (60kgs). Keep this Instruction Manual for future reference.
PAGE 2
Before Proceeding any further please make sure your kit has the following items. 1 x Heavy Duty Tilting Mount 2 x 8.66in. (220mm) Velcro Cable Ties 1 x 6 ft. HDMI™ cable Tools Needed ( Not Included) Safety Glasses Philips Screwdriver Drill Hammer Stud Finder Wood Drill Bit 7/32in. (5mm) Masonry/Concrete Masonry/ Concrete Wall Anchor Drill Bit 3/8in.
PAGE 3
Parts List Item Components Qty Item Wall Plate Components Qty Washer A 4 D 1 Magnetic Leveler TV Bracket B 2 E Lag Bolt 1 Allen Wrench 4 C F 1 Hardware List Mounting Hardware List Qty Mounting Hardware List Qty I M8 X 16MM 4 Q M4 / M5washer 4 J M6 X 12MM 4 R M6 / M8washer 4 K M5 X 12 MM 4 S M6 / M8spacer 4 L M4 X 12MM 4 T M4 / M5spacer 4 M M8 X 40 MM 4 N M6 X 35MM 4 O M5 X 30MM 4 P M4 X 30MM 4 2
PAGE 4
Assembly Tips: Become familiar with the instructions and all parts. Make sure that all parts are in the box and in good condition. Assemble the product on the open flat carton or a rug to protect the product and your floor. Some heavy products need a second person to assist in the assembly. Do not install on sloping surface. This TV mount is designed for use on a vertical wall that is constructed with wood studs, masonry or solid concrete. Never let children climb on product or play with product.
PAGE 5
1 Wall Stud Installation mm 07 4 / m in. r 16 o /610m in. 24 D C A Using a stud finder, locate the center of wall studs, then hold Wall Plate (A) against the wall at your desired position. Next use a pen or pencil to mark the location of where the 4 mounting Lag Bolts(C) will go into the center of the wall stud. Before marking, ensure the wall plate is level using the included magnetic leveler (E). Remove wall plate. Drill pilot holes at the marked 4 holes using 7/32 in. (5mm) drill bit.
PAGE 6
2 B B Carefully lay your TV face-down on a rug or flattened carton. Hand thread screws into the threaded inserts on the back of your TV to determine which screw diameter (M4, M5, M6, or M8) to use. If your TV has a flat back, use the shorter screws.
PAGE 7
HDMI Cables Information: This Kit includes 1 HDMI™ cable. Each HDMI cable measures 6 feet (1829 mm) in length. Technical Specifications: 1.4 Version Supports Ethernet, 3D and 4K Definition. O.D.: 6.0mm Double molding In-Wall CL2 Rated Velcro Cables Ties Information: This kit includes 2 velcro cable ties to help manage your cords. Each Velcro cable tie measures 8.66in. (220mm) Product Warranty This Limited Warranty covers any defects in material or workmanship for purchases made in the U.S.