Installation Manual

ManualsBrandsAtlantic ManualsElectronicsFull Motion Tilt-Swivel TV Wall Mount - Flat Screen TVs with 6 Foot HDMI Cable for 26-42 inch, Cable Ties and Leveler, PN63607148

Item No: 63607148

THIS INSTRUCTION BOOKLET CONTAINS

IMPORTANT SAFETY INFORMATION. PLEASE

READ AND KEEP FOR FUTURE REFERENCE.

Lot Number:

Date:

Congratulations on your Catalyst purchase. Follow these simple instructions and you’ll

have your TV mounted in no time.

This kit fits most TVs 26in. - 42in. (66cm - 106.7cm), up to 55lbs (25kgs).

Keep this Instruction Manual for future reference.

Keep your original proof of purchase (store receipt).

If you have any questions and/or wish to order parts, please call us toll free at 800-747-2660.

: NIM

ni49.3

MM00

MAX:

7.87in

00MM

MIN :

3.94in

00MM

MAX:

7.87in

00MM

-15°

+5°

±90°

MIN :

2.68in

MAX:

15.67in

398

Swivel

Tilt

Summary of content (8 pages)

PAGE 1
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Lot Number: Date: Item No: 63607148 Swivel +5° Tilt -15° MIN :2 MAX .68in/68 M :15.6 7in/3 M 98M M MIN :3.94in/100MM MAX:7.87in/200MM ±90° 0MM in/10 MM 4 9 . :3 0 MIN .87in/20 :7 X A M Congratulations on your Catalyst purchase. Follow these simple instructions and you’ll have your TV mounted in no time. This kit fits most TVs 26in. - 42in. (66cm - 106.7cm), up to 55lbs (25kgs).
PAGE 2
Before Proceeding any further please make sure your kit has the following items. 1 x Heavy Duty Full-Motion Mount 2 x 8.66in. (220mm) Velcro Cable Ties 1 x 6 ft. HDMI™ cable Tools Needed ( Not Included) Safety Glasses Philips Screwdriver Drill Hammer Stud Finder Wood Drill Bit 5/32in. (4mm) Masonry/Concrete Masonry/ Concrete Wall Anchor Drill Bit 3/8in.
PAGE 3
Parts List Item Components Item Qt y Components Qt y Wall Bracket A E 1 TV Plate Allen Wrench 1 Magnetic Leveler F 1 B 1 Lag Bolt C 3 Hardware List Mounting Hardware List Qty Mounting Hardware List Qty I M8 X 16MM 4 O M5 X 30MM 4 J M6 X 12MM 4 P M4 X 30MM 4 K M5 X 12 MM 4 Q M4 / M5washer 4 L M4 X 12MM 4 R M6 / M8washer 4 M M8 X 40 MM 4 S M6 / M8spacer 4 N M6 X 35MM 4 T M4 / M5spacer 4 2
PAGE 4
Assembly Tips: Become familiar with the instructions and all parts. Make sure that all parts are in the box and in good condition. Assemble the product on the open flat carton or a rug to protect the product and your floor. Some heavy products need a second person to assist in the assembly. Do not install on sloping surface. This TV mount is designed for use on a vertical wall that is constructed with wood studs, masonry or solid concrete. Never let children climb on product or play with product.
PAGE 5
1 A A B E Remove TV Plate (B) from Wall Bracket (A) using allen wrench (E), keep the screws for future use in Step 4. 2 Wood Stud Installation UP C A Using a stud finder, locate the center of wall stud, then hold wall bracket (A) against the wall at your desired position. Next use a pen or pencil to mark the location of where the 3 mounting Lag Bolts (C) will go into the center of the wall stud. Before marking, ensure the wall plate is level using the included magnetic leveler (F).
PAGE 6
Masonry/Concrete Installation UP C Wall Anchor (Not Included) A Use a pen or pencil to mark the location of where the 3 mounting Lag Bolts (C) will go into wall while holding Wall Plate (A) against the wall at your desired position. Before marking, ensure the wall plate is level using the included magnetic leveler (F). Remove wall plate. Drill holes at the marked 3 holes using 3/8 in. (9,5-10mm) drill bit. Sink Lag Bolt Anchors (not included) into holes with hammer until flush with wall surface.
PAGE 7
4 Hang TV to Wall Bracket as shown above. It is recommended two people, one on each side of TV participate in hanging TV to wall plate.. Tilt the top of the TV towards the wall and carefully position TV plate (B) over the wall bracket (A) until locking into place. Then fasten it with screws you disassembled in Step 1. HDMI Cables Information: This Kit includes 1 HDMI™ cable. Each HDMI cable measures 6 feet (1829 mm) in length. Technical Specifications: 1.
PAGE 8
Product Warranty This Limited Warranty covers any defects in material or workmanship for purchases made in the U.S.A and Canada, and excludes claims from conditions, malfunctions or damage not resulting from defects in material or workmanship. The warranty duration is one year. Keep your original proof of purchase (store receipt). If after inspection you find the product is defective, damaged or missing parts. DO NOT return to the store.