AT-UHF900-S1 USER’S MANUAL V2.06.21 June 2012 This module is limited to OEM Installation only.
AT-UHF900-S1 User’s Manual Company Date Version ATID Co.,Ltd 2012-06-21 V2.06.21 Revision history Version Revision Date V1.8.17 2010-08-17 V1.10.18 2011-10-18 V2.06.
AT-UHF900-S1 User’s Manual Company Date Version ATID Co.,Ltd 2012-06-21 V2.06.21 Contents 1. Introduction & System composition diagram ..........................................................4 Introduction ................................................................................................................................................. 4 System composition diagram ............................................................................................................ 4 2.
AT-UHF900-S1 User’s Manual Company Date Version ATID Co.,Ltd 2012-06-21 V2.06.21 1. Introduction & System composition diagram Introduction - The AT-UHF900-S1 is a compact size RFID reader module developed for the embedded reader market, which comprises printers, industrial PDA, and similar devices. It provides customers with compact size, low cost, high performance functions. It supports protocols of ISO18000-6C(EPC C1G2), ISO18000-6B, and it interfaces with a host system via UART.
AT-UHF900-S1 User’s Manual Company Date Version ATID Co.,Ltd 2012-06-21 V2.06.21 2.
AT-UHF900-S1 User’s Manual Company Date Version ATID Co.,Ltd 2012-06-21 V2.06.21 3. Reader Description LED Status DATA LED : The Red LED will twinkle when POWER LED : The Red LED is turned on the reader is receiving data from a tag. when the reader is powered. It can be removed for prevent battery consume. ANT Port ANT Port : Connect RF Cable to reader module and ANT Interface connector : Supply voltage and interface with a host system(PC, PDA…) via UART.
AT-UHF900-S1 User’s Manual Company Date Version ATID Co.,Ltd 2012-06-21 V2.06.21 Interface Pin-map ① ⑫ 1 VCC (3.8 ~ 4.2V, typ 4V) 2 VCC (3.8 ~ 4.
AT--UHF900 0-S1 Usser’s Maanual Company Date Version n ATID A Co.,Ltd 2012-06-21 V2.06.21 4. Reade er Specificatio on Interfacce Host connector Part No. : 12505WR--12 Man nufacturer : Yeonho Eleectronics ANT Connector Part No o. : CMJ-S00 0 Manufactu urer : Giga LLane Physical Dimenssion SIZE 33mm × 39mm × 7.
AT-UHF900-S1 User’s Manual Company Date Version ATID Co.,Ltd 2012-06-21 V2.06.21 Appendix I : FCC Certification Requirements 1. Caution Any changed or modifications not expressly approved by the party responsible for compliance could void the user`s authority to operate this equipment. 2. OEM installation guide I. OEM integrators must be instructed to ensure that the end-user has no manual instructions to remove or install the module. II.
AT-UHF900-S1 User’s Manual Company Date Version ATID Co.,Ltd 2012-06-21 V2.06.21 5. Information for importation of radio frequency devices in to the United States. To ensure compliance with all non-transmitter functions the host manufacturer is responsible for ensuring compliance with the module(s) installed and fully operational.