AT-R2000-S1 USER’S MANUAL V2.06.
AT-R2000-S1 User’s Manual Company Date Version ATID Co.,Ltd 2012-06-29 V2.06.29 Revision history Version Revision Date V2.6.
AT-R2000-S1 User’s Manual Company Date Version ATID Co.,Ltd 2012-06-29 V2.06.29 Contents 1. Introduction & System composition diagram ..........................................................4 Introduction ................................................................................................................................................. 4 System composition diagram ............................................................................................................ 4 2.
AT-R2000-S1 User’s Manual Company Date Version ATID Co.,Ltd 2012-06-29 V2.06.29 1. Introduction & System composition diagram Introduction - The AT-R2000-S1 is a compact size RFID reader module developed for the embedded reader market, which comprises printers, industrial PDA, and similar devices. It provides customers with compact size, low cost, high performance functions. It supports protocols of ISO18000-6C(EPC C1G2), and it interfaces with a host system via UART.
AT-R2000-S1 User’s Manual Company Date Version ATID Co.,Ltd 2012-06-29 V2.06.29 2.
AT-R2000-S1 User’s Manual Company Date Version ATID Co.,Ltd 2012-06-29 V2.06.29 Reader Software & User Document CD-ROM 3. Reader Description 상태 표시 LED DATA LED : The Red LED will twinkle when the reader is receiving data from a tag. ANT Port ANT Port : Connect RF Cable to reader module and ANT Interface connector : Identification withinterface Radio with andaOptical Supply voltage and host system(PC, PDA…) via UART.
AT-R2000-S1 User’s Manual Company Date Version ATID Co.,Ltd 2012-06-29 V2.06.29 Interface Pin-map ① ⑫ 1 VCC (3.8 ~ 4.2V, typ 4V) 2 VCC (3.8 ~ 4.
AT-R2000-S1 User’s Manual Company Date Version ATID Co.,Ltd 2012-06-29 V2.06.29 4. Reader Specification Reader Performance (KOREA, USA, EUROPE, etc) Description Value MODEL AT-R2000-S1 Architecture UHF RFID Reader Module Protocol EPC Gen2(ISO 18000-6C) Frequency 917.3MHz to 920.
AT-R2000-S1 User’s Manual Company Date Version ATID Co.,Ltd 2012-06-29 V2.06.29 Channel number & Frequency table CHANNEL CHANNEL KOREA USA EUROPE 0 917.3 902.75 865.7 25 915.25 1 917.9 903.25 866.3 26 915.75 2 918.5 903.75 866.9 27 916.25 3 919.1 904.25 867.5 28 916.75 4 919.7 904.75 29 917.25 5 920.3 905.25 30 917.75 6 905.75 31 918.25 7 906.25 32 918.75 8 906.75 33 919.25 NO. NO. KOREA USA 9 907.25 34 919.75 10 907.75 35 920.
AT-R2000-S1 User’s Manual Company Date Version ATID Co.,Ltd 2012-06-29 V2.06.
AT-R2000-S1 User’s Manual Company Date Version ATID Co.,Ltd 2012-06-29 V2.06.29 5. How to Run AT-R2000-S1 Sample Program 1. Windows XP/7 1.1 File name : Reader@Express V3.2.24.zip 1.2 Simple use : 0. Add bluetooth device (Reader), and confirm relevant communication port in device manager. 1. Decompress the file. Execute reader@express.exe. 2. Designate communication port → Select from combo box located at top upper left side. 3.
AT-R2000-S1 User’s Manual Company Date Version ATID Co.,Ltd 2012-06-29 V2.06.29 1. If you select [Search] in [Option menu], then the window to select bluetooth device appears. Already paired devices are appeared on upper part. Because you must search new device therefore click [Scan for devices] Select the device name “Blue Angel” among searched devices at the lower part. 2. Only when you connect first time, Pairing process is progressed – PIN number is “0000”.
AT-R2000-S1 User’s Manual Company Date Version ATID Co.,Ltd 2012-06-29 V2.06.29 Appendix I : FCC Certification Requirements 1. Caution Any changed or modifications not expressly approved by the party responsible for compliance could void the user`s authority to operate this equipment. 2. OEM installation guide I. OEM integrators must be instructed to ensure that the end-user has no manual instructions to remove or install the module. II.
AT-R2000-S1 User’s Manual Company Date Version ATID Co.,Ltd 2012-06-29 V2.06.29 5. Information for importation of radio frequency devices in to the United States. To ensure compliance with all non-transmitter functions the host manufacturer is responsible for ensuring compliance with the module(s) installed and fully operational.