Product User’s Guide Ver. 2.0 Model : AT280 ATID Co.
Disclaimer ATID is registered trade mark of ATID Co., Ltd. Si303, Si203, AT880, AT280 is registered trade mark of ATID Co., Ltd. All other trademarks and trade names referred to herein are property of their respective owners. Microsoft Windows®, Windows® 2000, Windows® CE .NET, Windows® NT, Windows® XP, Windows® and Embedded Handheld are registered trademarks of Microsoft Corporation. ATID Co., Ltd.
Table of Contents Copyright and Agreement............................................................................................................... 5 Chapter1. Caution when using ATID PDA Product .......................................................................... 6 1. How to use the battery correctly ................................................................................................. 6 2. Caution when using ATID PDA Product ...........................................................
3.3 Bixolon SPP-R200 Printer Demo ..................................................................................... 42 Chaptor5. Appendix ..................................................................................................................... 44 Specification with AT280 ..............................................................................................................
Copyright and Agreement - This manual is subject to copyright protection along with all relevant rights. - No part of this document or the procedures described therein can b e copied, reproduced, changed, tr anslated or tra nsmitted in a ny for m or by any means without prior written permission of ATID Co., Ltd. or its wholly owned subsidiaries. - ATID reserves the right to change any contents of this manual at anytime without prior notice.
Chapter1. Caution when using ATID PDA Product Before you handle and operate your AT280 and other ATID PDA Products, Please read through and familiar with the contents of this manual. 1. How to use the battery correctly When you dropped the m ain b ody or ba ttery in w ater, p lease d o no t p ut it on the stove or heater for drying. Just keep it in natural temperature or contact with purchase place.
Chapter2. Products compositions AT280 mobile computer is a small, ergonomically designed PDA, which built on the Microsoft window CE 5.0 Operating System. The PDA could equip with Barcode Scanner and so on devices as optional items. Its various function applied to Industry, Enterprise, Logistics and so on, can be used extensively in many fields. 1. Package components After opening the product packaging box, check the items listed as below: M ODEL : AT280 2. Adaptor and AC Cable 3. Main Battery 1.
2.
Part Descriptions 1D/2D Scanner Window (Option) Laser beam emitted through this window. Please be careful the foreign substances and preventing from the damage. Warning! Do not look at the laser beam directly. UHF Connecting Port Enable you to install a UHF 900Mhz tag reader module. Reset Button Enable you to perform a Warm Reset, Press button simultaneously, enable you to perform a Hard Reset. Microphone Enable you to conduct communication.
Chapter3. Basic Functions 1. Power and Battery AT280 battery is composed of main battery and backup battery. A main battery supplies the power to the system and RAM which could keep save the data. A backup battery could keep save the data of RAM when the main battery discharged completely. Main Battery: 3.7V 2,200mA Lithium - polymer Backup Battery: 3.
Power off automatically The device has been powered but has not been used for a period of time, then the system will enter low-power mode (sleep mode) automatically. You could set the sleep mode time at the power management so that could save power and prolog the battery life. [Start Button] -> [Setting] -> [Control Panel] -> [Power Management] -> [Power Off] Power Icon You can also double click Icon to enter this interface.
1.2 Check ing Battery Gauge Note: Battery life is largely affected from the user using method and surrounding environments. A 2200mA battery is usually needs 6 ~ 12 hours to get charged completely. Checking Battery Gauge [Start Button] -> [Setting] -> [Control Panel] -> [Power Management] -> [Battery] Low Power Warning If the remaining battery gauge cannot support the system running any more, a low power warning message window will be popped up on the screen.
1.3 Ba ckup Battery A backup battery could safely keep the RAM data, even the main battery discharged completely. Caution: If the main battery and the backup battery are both discharged, the RAM date will disappear. Among the running programs, the RAM data will disappear in which are using, and the system will not be restore to previous state, but rebooting system after start charging. 1.4 Dispose of Battery You need to purchase a new one if the battery damaged or reached its end of life.
2. System Reset If there is no response from the system or an application is locked up and stops responding, and when you want to upgrade the firmware, reset the system is maybe necessary. 2.1 Sof t Reset When do you need to perform Soft Reset? If there is no response for your command from the system, it calls (Hang-up). In this case, you need to perform a soft reset. Soft reset will end programs and the user memory region w ill be deleted, but installed programs and data, and so on, are not affected.
2.3 In itializing System Enter [Boot Menu] and do what you want, when in the situations as below: 1. When you need to restore the original registry information, which has been changed. 2. When you need to initialize “My device” storage spaces. 3. When you need to initialize “Flash Disk” storage spaces. 4. When you need to initialize system to factory default settings. You can also p ress butto n an d butto n simu ltaneously, an d t hen pr ess button to perform Hard Reset.
3. Using Micro SD Card The image as below is battery compartment of AT280, and there are 1EA SIM C ard Slot, 1EA SAM Card Slot(Option) and 1EA Micro SD Card Slot.
4. System Settings 4.1 S etting Brightness Brightness is already set 80% at the factory, and brightness is the biggest consume part of the power, so you might need to adjust it to your actual need. [Setting Brightness] 1. [Start Button] -> [Setting] -> [Control Panel] -> [Brightness] 2. [MyDevice] -> [Control Panel] -> [Brightness] 밝기: Enable you to adjust brightness. 끄기: Enable you to adjust the timing of turning off brightness. 키램프: Enable you to adjust the timing of turning off key lamp. 4.
4.3 Setting Volume and Sounds Volumes is already set 80% at the factory, and you can readjust you need volume at control panel ->”Volume and Sounds” Setting Volume and Sounds [Start Button] –> [Setting] -> [Control Panel] -> [Volume and Sounds] 4.4 Setting Data and Time [Start Button] -> [Setting] -> [Control Panel] -> [Date and Time] Setting Year: Double Click the year, and click the up and down arrow button to set year.
Setting Month: Double Click the Month or Click L/R arrow button to set Month. Setting Day: Click the day directly to set day. Setting Time: Click AM/PM, Time area directly, using up and down arrow button to set Time. Setting Time Zone: Click up and down arrow direction to select time zone and click apply button.
5. Using keypad Keypad enables you to input numbers, alphabets and special symbols. And can also execute other set function with button. 5.1 Us ing keypad If you’d like to change the current input language, can press button as below steps: [Numeric] -> [Lowercase] –> [Uppercase] Click the input language icon on the taskbar is also can change the input language. 5.
5.3 Usi ng Button Press button and other buttons simultaneously can activate functions as below: Fun + button Descriptions , Enable you t o canc el th e se lected co mmand or th e pro grams operating or state.(ESC) Enable you to increase or decrease the sound. <3>,<5>, <4>, <9> Enable you to perform page Up or page Down and HOME <6> Enable you to delete a letter which located after the cursor.(DEL) <7>, <2> Enable it has Tab button function and Space button function.
7. Using ActiveSync Program ActiveSync p rogram cou ld synchr onize be tween th e PC and PDA de vice, so tha t ena ble you to perform program installing, copy, transition, delete and so on operations. 7.1 Installing Microsoft ActiveSync Program Download the late st ver sion of Active Sync program from Microsoft Windows CE. Website, a nd install it to your PC. ActiveSync: Windows XP Download Address: http://www.microsoft.com/downloads/. Caution: You must use ActiveSync v3.7 version or above.
7.2 Connecting PC to PDA Setting PC [Start button] -> [Programs] -> [Microsoft ActiveSync] Executing Microsoft ActiveSync program Click [File], Click [Get Connected]. Select , press OK button.
Setting AT280 PDA [Start Button] -> [Setting] -> [Control Panel] -> [PC Connection] Double click PC Connection icon To check if set to connected to USB Sync cable 7.3 Transmi tting Data Connect USB cable to PC or Device. 현재 이 이미지를 표시할 수 없습니다. Connecting state 현재 이 이미지를 표시할 수 없습니다. Disconnecting state You can check the ActiveSync connecting state on the taskbar.
After ActiveSync Explore button. connected, click Designate transmitting file path. Transmit files.
8.
Chapter4. Optional Module AT280 provided variety of optional modules and in this chapter will provide you the information of each module. Optional modules as below: 1. B arcode Scanner -. 1D Laser Barcode Scanner -. 2D Imager Barcode Scanner 2. Wireless LAN – 802.11 b/g 3.
1. 1D or 2D Barcode Scanner AT280 enable to equip with a compact image engine, which could recognize all the 1D and 2D barcodes. 1.1 Scanning Barcode Press Scan Buttons to Read Barcode. Start Button/Programs/Demo Apps/Scanner/BarcodeDemo 1.2 Setting Barcode Emulator Barcode Emulator program enables you to set the barcode value input type, scan button, scan sound on and off so on, and could input the scan values to any program(such Web program, WordPad program so on) where located the cursor.
Executing Barcode Emulator [Start Button] -> [Program] -> [Demo Apps] -> [Scanner] -> [BarcodeEmulator] Run Barcode Emulator Program Barcode Emulator Icon will be showed on the taskbar. Run WordPad Program, then click the Emulator Icon Result Type Keyboard Event: Barcode inputted one by one. Copy Paste: Barcode will be stored be stored in clipboard and shown at paste way.
Terminator None:Not input terminal barcode value. CRLF: Barcode value will include an “Enter” Space: Barcode value will include a “Space” Key Setup F1-F8 Key: Hardware Keypad Gun1, Gun2: Gun Trigger Tab: Inputting type as same as Tab Key Function.
1.3 Setting Barcode Symbology AT280 enables you to set the various barcode by using barcode symbologies program. [Start Button] -> [Program] -> [Demo Apps] -> [Scanner] -> [BarcodeSetup] Run BarcodeSetup Program. Set Barcode Type in detail. Click Set Enable Status button Make a check mark on the barcode which you want to use, and then click button.
1. 2. 3. 2D Symbology Selection: 1. Initialize all the symbologies to factory default value. 2. Unable to read all the symbologies. 3. Enable to read all the symbologies. 1D Symbology selection: 1. Initialize all the symbologies to factory default value. 2. Unable to read all the symbologies. 3. Enable to read all the symbologies. 4. Set a level that enable to read more than two symbologies simultaneously.
[Correct Scanning Beam Position] 1. The more small size of barcode, AT280 needs the more close to barcode. The effective scanning rang of Si303 is from 40 ~ 300mm. if failed to scan barcode, please try to adjust scan angle and distance. 2. The laser beam is a red thick line, when scanning a barcode. 1D 2D [Incorrect Scanning Beam Position] 1. The laser beam must across the barcode. 2. It will couldn’t scan barcode if the laser beam across only a fraction of barcode.
2. Using Wireless Lan AT280 enable to equip an internal 802.11 radio module to transfer data and do wireless communication. AT280 supports TCP/IP network protocol, and communicate with a host computer directly. 2.1 Connecting to Wlan [Start Button] -> [Program] -> [Demo Apps] -> [Wireless Lan] Run the Wireless LAN program. Select , and then click Ok button. 2.2 Setting Wlan Manually Double click a suitable device from the list of AP. Input Key Password, and then click OK button.
2.3 Checking WLAN Information Double click WLAN icon on the taskbar to check Wlan information. Start Button/Programs/ATID App/Wireless Lan, and then select to stop Wlan communication.
3. Using Bluetooth This User Guide is only applied to the AT280 which installed "MD6RF" module. AT280 not only supports to the SPP printer device like as AT870/AT570, but also supports Bluetooth Stack Service of Windows CE. This Chapter described how to Pairing and Disc onnecting between PDA and Bluetooth devices, and also described basic testing method of Mobile Printer SPR-R203, which launched by Bixolon, as a sample device. 3.
B. Select “Bluetooth ON” item, then press OK button. C. After Bluetooth executed, the Bluetooth BTPAN1 icon will be appeared on the bottom of Windows Taskbar, and the red cross mark on it shows that you access is available and prepared to be accessed.
2. Blueto oth Function Closing A. Executing “Bluetooth” demo App from Windows CE Menu. B. Select “Bluetooth OFF”, then to press OK button to off the Bluetooth power.
3.2 Bluetooth Pairing After connecting each o ther throu gh pairing way, Bluetooth d evices cou ld do its function properly. 1. Executing Bluetooth program as below path. Start->Settings->Control Panel->Bluetooth Device Properties -> 2. Press “Scan Device” button to searching devices which could pairing.
3. Depending on the situ ation, maybe n eed to input password for some devices, the n co uld search devices continually. ** According to the devices need, some devices have to input Pin Code (password) firstly. ** SPP-R200 printer factory setting Pin Code is “0000”. 4. The devices which can connect will be listed, after finished searching. ** If c annot fi nd y our n eed de vice, p lease pr ess “Scan Device” button to sea rching yo ur device again.
5. Double click you r device name, click “Trusted” Tab to ad d the device to the pairing items, then click “Yes” button to ending the Bluetooth Manager. -> -> * You can set the Password (Authentication code) according to the each device. * The Red Cross mark(X) on the Key icon will disappear if finished to registration.
6. Click “Active” button to active the paired device. 7. Then, you can perform the data communication through COM2 Port. 8. After pairing and active the Bluetooth device, you can use the Device driver, S/W, and SDK, which provided from the Bluetooth device manufacturer, to perform the relevant Bluetooth function. 3.3 Bixolon SPP-R200 Printer Demo SPP-R200 is ty pical Mo bile Prin ter o f th e Bixo lon, y ou can using its App which ge t fr om Bixolon website to perform print through Bluetooth.
11. Change the COM8 to COM2, then press “Open” button to testing printer.
Chaptor5. Appendix Specification with AT280 Physical and Environmental Characteristics Dimension 53.5mm(L) X 146.9mm(W) X 32.2mm(H) Weight 320g Operation Temperature -10℃ ~ 50℃ Storage Temperature -30℃ ~ 60℃ Humidity Non-condensing Drop 1.5m drop to concrete Performance Characteristics Processor Marvell™ PXA320 806MHz Operating System Windows CE 5.0 Memory ROM 256MB (Max. 512MB) / RAM 256MB Display 2.