User's Manual

HEADPHONES
BLUETOOTH
USB Cable
3 Seconds
12:12 PM
Bluetooth
Bluetooth
Devices
Paired
ON
Now discoverable
Altec Over ear BT
5 Seconds
MZW300 Headhones
3. Charging: When charging, a red LED light will illuminate. The light will turn blue
when your unit is fully charged. Your headphones can take up to two
hours to fully charge.
Important Note
You can also use the 3.5mm Audio Cable to connect audio devices through the
Auxilliary Port on your headphones.
Note that when using the Audio cable instead of the standard wireless Bluetooth
connection, the Volume Up, Volume Down and Play/Pause buttons do not function.
Please use your audio source to control these functions.
2. For a look at the various buttons and parts of your headphones,
view the graphic below.
5. Pairing Your Headphones With a Bluetooth Phone
-Press and hold the Power button for around five seconds. When your
headphone is ready to pair with a Bluetooth audio source, it will go
into pairing mode, with red and blue LED lights will flash alternately.
-Go to the Bluetooth Manager of your Bluetooth device. Search
Bluetooth devices and select “Altec Over ear BT” to start connecting.
-If required, enter the PIN code "0000” and confirm the entry. Once
paired, the headphone will connect to your Bluetooth device
automatically.
4. Power ON/Power OFF Your Headphones:
-Press and hold the Power button for approximately three seconds to power
on your headphones. Your headphones will automatically connect with the
last phone they were paired with.
-Once powered on, you can press and hold the
Power button again for approximately five
seconds to power o your headphones. The
LED Indicator light will briefly turn red before
powering o.
NOTE: In order to save power, your
headphones will automatically
power o if left unpaired and idle for
over two minutes.
1. Make sure the following items are
included in your package.
Power/play/Answer
Volume Up/NEXT
Volume Down/Previous
Indicator
Microphone
Charging Port
Auxiliary Port
6. Listening to Music
Play/Pause
Press the Power button to get music from your audio source to play or pause.
Next/Previous Song
Press and hold the Volume Up or Volume
Down buttons for two seconds to advance to
the next song or go back to the previous one.
Increase/Decrease Volume
Press the Volume Up or Volume
Down buttons to increase or decrease the
volume.
NOTE: Music will automatically pause when
a call is dialed out or when there is
an incoming call. It will resume when
the call ends.
7. Using Your Headphones During Phone Calls
Last Number Redialing
Quickly tap on the Answer button twice and the last
number that you dialed will be redialed.
Answering an Incoming Call
To answer an incoming call, quickly press the
Answer button.
Ending a Call
To end a call, quickly press the Answer
button, and the call will be disconnected.
Adjusting Volume
By pressing the Volume Up or Volume
Down buttons you can increase or
decrease the volume of the phone call.
Item # MZW300
Quick Start Guide
Technical Support
For technical support issues please visit our website at www.alteclansing.com.
You can find manuals and FAQ's at the website. Can't find what you are
looking for? Call 1-855-292-4087 to access our technical support information
on the phone.