User's Manual

ManualsBrandsATI Electronics ManualsElectronicsBT DRIVE FREE 112

ENGLISH

Contents

BT Drive Free 112 Bluetooth Car Kits 15

Bluetooth technology 16

Safety and general information 16

Disposal notes 17

Scope of delivery 17

Installation on the steering wheel 17

Overview 18

Battery information 18

Charging the battery 19

Switching on/off 20

Registering (pairing) and connecting with the cell phone 20

Multi-connection function 21

Establishing a connection with two cell phones 21

Using the BT Drive Free 112 22

Resetting the BT Drive Free 112 24

Light indicators and signal tones 24

Fault removal 25

Declaration of conformity 25

Warranty 25

Technical data 26

BT Drive Free 112

This wireless Bluetooth hands-free system was developed specifically for users who want to use

their cell phone while driving. The multi-connection function allows the simultaneous use of the BT

Drive Free 112 with two cell phones. Its improved microphone system and DSP technology for echo

cancelling and noise suppression achieve an excellent hand-free quality.

Bluetooth technology

Bluetooth

is a registered trademark of Bluetooth SIG, inc. Bluetooth is a wireless communication

technology with short range. It enables wireless connections between all compatible portable and

stationary communication devices. The technology is based on a radio connection that ensures a fast

and reliable transmission of voice and data information.

Bluetooth is oriented to the worldwide applicable standard for operating in the internationally

recognized ISM frequency band (Industrial Scientific & Medical). Within the ISM band (2.4 GHz to

2.48 GHz), the Bluetooth transmission operates 1600 times per second between 79 different

frequencies with a data transmission range of up to 10 meters (Class 2).

Summary of content (9 pages)

PAGE 1
ENGLISH Contents BT Drive Free 112 Bluetooth Car Kits Bluetooth technology Safety and general information Disposal notes Scope of delivery Installation on the steering wheel Overview Battery information Charging the battery Switching on/off Registering (pairing) and connecting with the cell phone Multi-connection function Establishing a connection with two cell phones Using the BT Drive Free 112 Resetting the BT Drive Free 112 Light indicators and signal tones Fault removal Declaration of conformity Warrant
PAGE 2
Safety and general information – Carefully read the operating instructions and follow the instructions. – Observe all locally applicable laws for the use of cell phones and hands-free systems while driving. Operate the BT Drive Free 112 only if the traffic situation allows it and you are not creating a risk for other traffic participants. – To avoid any damages and malfunctions, do not drop the device from an elevated height. – Protect the device against humidity, water and other liquids.
PAGE 3
17 Overview 1. 2. 3. 4. 5. 6. 7. MF button (illuminated multifunction button) Loudspeaker Decrease volume (–) Increase volume (+) Mute Microphone Charging socket (micro USB port) Battery information The device is equipped with an integrated lithium-polymer battery. The battery cannot be replaced. Do not attempt to remove the battery from the device since it would damage the device. The full performance of a new battery is not achieved until after two or three complete charging-discharging cycles.
PAGE 4
Note: As soon as the charger is connected, the BT Drive Free 112 switches off. During the charging process, the MF button lights red. After the battery is full charged, the MF button lights blue. The charging process of the battery lasts approx. 3 hours. Disconnect the BT Drive Free 112 from the charger after it has been charged. A completely charged battery supports a talk time of up to 15 hours and a standby time of up to 500 hours.
PAGE 5
not exceed a 1 meter. – The BT Drive Free 112 must be switched off . – Press the MF button for approx. 6 seconds until you hear a low-pitched signal tone and the MF button intermittently flashes red and blue. The device is in registration mode. – Activate the Bluetooth function of the cell phone and start the search for Bluetooth devices. (For further details, please read the operating instructions of your cell phone). – From the list of devices found, select the "BT DF 112".
PAGE 6
21 Using the BT Drive Free 112 After successfully completing the registration and charging the battery, the following functions can be executed: Making a call – Voice dialing* To activate voice dialing, briefly press the MF button. You hear several signal tones. After the signal tone, speak the voice command. After the voice command has been recognized, the cell phone dials the number associated with it.
PAGE 7
You receive a call during an active call Hold the active call and answer the incoming call. End the active call and answer the incoming call. Continue the active call and reject the incoming call. Press the MF button for 2 seconds. Briefly press the MF button. Press the MF button twice. You are conducting two calls, an active one and one on hold Change between the active call and the one on hold. End the active call and answer the call on hold. Continue the active call and end the call on hold.
PAGE 8
Standby mode without connection Standby mode with connection Incoming call Active call Mute Low battery Battery is charging alternately Flashes blue once every 3 seconds Lights blue every 3 seconds Flashes blue Flashes blue once every 2 seconds Flashes red once every 10 2 tones every 10 seconds seconds Flashes red once every 3 5 tones every 20 seconds seconds Lights red. Lights blue after the battery is fully charged.
PAGE 9
requirements and the other relevant regulations of the directive 1999/5/EC. The declaration of conformity can be found on the Internet under www.blaupunkt.com. Warranty We provide a manufacturer's warranty for products bought within the European Union. For devices purchased outside the European Union, the warranty terms issued by our respective responsible domestic agency are valid. The warranty terms can be called up from www.blaupunkt.com.