Bluetooth audio adapter Model Name:BAR100 FCC ID: SF4-BARXXX
User manual Item# 51901
1. Notice Before Using Thank you for purchasing the Bluetooth® Audio Receiver. Please read this User's Manual completely before you use the device. The Music Receiver is based on the advanced Bluetooth® wireless technology and compliant with Bluetooth V3.0+EDR specification, it is capable of connecting with a Bluetooth® enable phone or other Bluetooth® device with audio gateway.
2. Package Contents List Please inspect this package and refer to the package contents list below to verify all items were included in this package: 1) Bluetooth® Wireless Music Receiver Audio Receiver 2) USB Charging Cable 3) 3.5mm Extension Adapter 4) User's Manual 3. Bluetooth® Audio Receiver Overview 1) 2) 3) 4) 2 3.
4. Battery information The device is equipped with an integrated lithium-polymer battery. The battery cannot be replaced. Do not attempt to remove the battery from the device since it would damage the device. The battery can be charged and discharged several hundred times, but it loses its capacity over time. Important: Ensure that the battery is fully charged if you do not use the device for a long period of time. To avoid a complete discharge of the battery, it should be charged at least every 3 months.
hour. The red indicator light will turn blue when the battery is fully charged. Disconnect the charger from the device and the outlet. NOTE: - The fully charged battery has power for up to 10 hours of play-time, and up to 300 hours of standby time. However, the talk and standby times may vary when used with different Bluetooth® devices, usage settings, usage styles, and environments.
instruction to pair with a Bluetooth® enabled mobile phone. Pairing is a one-time process and required only for the first connection with the cell phone. 1) Keep it within range of a Bluetooth®-ready cell phone; the distance should not exceed 1 meter. 2) The device must be off. 3) Hold the MFB button for approx. 4 seconds, the indicator light intermittently flashes red and blue. The device is in pairing mode. 4) Find the Bluetooth® setting of your cell phone and start the search for Bluetooth® devices.
7) After pairing, the music receiver, automatically connect with the cell phone. Once paired, the device will change to standby mode and the indicator light will flash blue 2 times every 5 seconds. Note: If pairing is not completed within 2 minutes, the Wireless Music Receiver will turn off. If this happens, repeat the pairing process. 7. Turning on /off Bluetooth® Wireless Music Receiver Turning on Press and hold MFB for 2 seconds, the Blue indicator light will flash blue 3 times, it is now turned on.
Turning off Press and hold MFB for 4 seconds, the Red indicator light will flash red 3 times. It is now powered off. Note: To conserve power, if it is not connected to a device for approximately 10 minutes, it will turn off automatically. 8. Using the wireless music receiver After the Music Receiver is paired successfully, plug the 3.5mm male connector to the AUX jack of your car or home stereo system, it is now ready to listen music. 9.
3) 4) 5) 6) 7) 8) 9) 8 Keep device away from humidity, water and any other liquid. If the device is exposed to water, moisture and other liquids do not operate it to avoid any electrical shock, explosion and damage to the device or yourself. Do not place or keep this device near any heat sources, such as, direct sunlight, radiators, stoves or other apparatus that produce heat. This may cause an explosion, degrade the performance and/or reduce battery life.
10) The battery used in this device may present a risk of fire or chemical burn if mistreated. www.Xtremecables.
Important Regulatory Information This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.