User's Guide

4
Pair to your Bluetooth phone
Before you use your headset for the first time, ensure that it is paired to use it with
devices such as your Bluetooth phone.
Bluetooth devices
H900
Scan results
Enter Bluetooth
Passkey
****
Once you pair the headset with a device, the Headset will be automatically connected
to the device wherever you turn the headset on.
Enter PIN code"0000"
(4 zeros) and confirm to
complete pairing.
Press and hold the
Multi-Function until you see
the LED light flash blue and
red alternately indicating
the unit is in pairing mode.
(Approximately 6 seconds)
Following your phone's instruction
guide, set your Bluetooth enabled
phone into search mode
Insure the
headset is off.
Your phone will find the
headset and show the
device name on the
screen, select the device
name to confirm pairing.
4
5
IMPORTANT!
When the headset paired with
mobile phone, the blue indicator
will have two flashes very 5
seconds. If failed, the blue
indicator will have one flash
every 3 seconds
NOTE:
l If the pairing is successful, the headset will connect to your phone automatically,
you may need to confirm the enquiry on your phone.
l While the headset is paired with the phone and connected, the indication light
will flash 2 times every 5 seconds. If failed or didn't connect to the phone, the blue
indicator light will flash 1 time every 3 seconds.
l Once you paired the headset with one device or more, the Headset will
automatically connect to the phone you last connected wherever you turn the
headset on, but make sure your phone's Bluetooth function is active.
l The headset is supports Bluetooth v2.1+EDR specification, the simplified pairing
process will make paring your devices easily, if your mobile phone supports
Bluetooth v2.1+EDR specification, you just need turn on both of them, and add
new Bluetooth device on your phone, the headset and your phone will find each
other and connect automatically.
l The headset supports multi-point technology. If you need connect the headset to
nd
the 2 Bluetooth phone, please repeat the pairing operation steps above. When
finish the pairing, turn off the headset and turn on again, the headset will connect
to the both 2 phones automatically.