H900 Bluetooth Headset Made in China
Contents , What s in the box .......................................................................................... 1 1 , What s in the box The headset contains the following parts: Charge the battery ....................................................................................... 2 Battery information ..................................................................................... 3 Pair to your Bluetooth phone .....................................................................
IMPORTANT NOTICE! 2 Charge the battery This device has a built-in rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. 1. Connect the charger to the correct outlet. 2. While the charger is connected, the red indicator light displaying during charging. If charging does not start, disconnect the charger, plug it in again, and retry. Charging the battery fully may take up to 2 hours. 3. When the battery is fully charged, the red indicator light turn blue.
Pair to your Bluetooth phone Before you use your headset for the first time, ensure that it is paired to use it with devices such as your Bluetooth phone. Once you pair the headset with a device, the Headset will be automatically connected to the device wherever you turn the headset on. Insure the headset is off. NOTE: l If the pairing is successful, the headset will connect to your phone automatically, you may need to confirm the enquiry on your phone.
Turning headset on /off 6 *Turn on the headset If the headset is turned off, press and hold MFB for 2 seconds until you hear a melody from low to high, the headset turns on, the Blue indicator light will flash 3 times at the Wearing your headset The headset can be worn on either the Left or Right ear. If you want to carry the headset on the other ear, please change the direction of the ear clamp follow the figures below. same time. *Connects to the phone 1.
9 Reject an incoming call 7 Making a call * By phone's keypad At the stand-by state, dial the number on your phone directly to make a call. * Use Voice-Dialing At the stand-by state, press the MFB shortly, you will hear a short tone from the headset, and the phone will prompt you say the voice tag like your friend's name. If the voice tag is identified by the phone, the related number will be dial-out later.
* While you are in the calling and another call was holding on, press and hold MFB for 2 seconds can shift the current calling to the holding on calling. * While you are in the calling and another call was holding on, press Volume Up button shortly can add the holding on call to the current conversation to make a multiparty call.
16 FCC & IC Statement 18 Warranty Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV interference, caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.